To achieve good rate capability of lithium metal anodes for high-energy-density batteries, one fundamental challenge is the slow lithium diffusion at the interface. Here we report an interpenetrated, ...three-dimensional lithium metal/lithium tin alloy nanocomposite foil realized by a simple calendering and folding process of lithium and tin foils, and spontaneous alloying reactions. The strong affinity between the metallic lithium and lithium tin alloy as mixed electronic and ionic conducting networks, and their abundant interfaces enable ultrafast charger diffusion across the entire electrode. We demonstrate that a lithium/lithium tin alloy foil electrode sustains stable lithium stripping/plating under 30 mA cm
and 5 mAh cm
with a very low overpotential of 20 mV for 200 cycles in a commercial carbonate electrolyte. Cycled under 6 C (6.6 mA cm
), a 1.0 mAh cm
LiNi
Co
Mn
O
electrode maintains a substantial 74% of its capacity by pairing with such anode.
The sluggish reaction kinetics of the alkaline hydrogen evolution reaction (HER) remains an important challenge for water–alkali electrolyzers, which originates predominantly from the additional ...water dissociation step required for the alkaline HER. In this work, it is demonstrated theoretically and experimentally that metastable, face‐centered‐cubic α‐MoC1−x phase shows superior water dissociation capability and alkaline HER activity than stable, hexagonal‐close‐packed Mo2C phase. Next, high surface area ordered mesoporous α‐MoC1−x (MMC) is designed via a nanocasting method. In MMC structure, the α‐MoC1−x phase facilitates the water dissociation reaction, while the mesoporous structure with high surface area enables a high dispersion of metal NPs and efficient mass transport. As a result, Pt nanoparticles (NPs) supported on MMC (Pt/MMC) show substantially enhanced alkaline HER activity in terms of overpotentials, Tafel slopes, mass and specific activities, and exchange current densities, compared to commercial Pt/C and Pt NPs supported on particulate α‐MoC1−x or β‐Mo2C. Notably, Pt/MMC shows very low Tafel slope of 30 mV dec–1, which is the lowest value among the reported Pt‐based alkaline HER catalysts, suggesting the critical role of MMC in enhancing the HER kinetics. The promotional effect of MMC support in the alkaline HER is further demonstrated with an Ir/MMC catalyst.
An ordered mesoporous material constructed with a metastable, face‐centered‐cubic α‐MoC1−x phase is presented as a catalyst promoter and support for metal catalysts to boost sluggish alkaline HER activities. Density functional theory calculations and experimental studies reveal that the enhanced activity originates from excellent water dissociation capability, facile proton adsorption, and efficient mass transport.
The propensity of lithium dendrite formation during the charging process of lithium metal batteries is linked to inhomogeneity on the lithium surface layer. The high reactivity of lithium and the ...complex surface structure of the native layer create “hot spots” for fast dendritic growth. Here, it is demonstrated that a fundamental restructuring of the lithium surface in the form of lithium silicide (LixSi) can effectively eliminate the surface inhomogeneity on the lithium surface. In situ optical microscopic study is carried out to monitor the electrochemical deposition of lithium on the LixSi‐modified lithium electrodes and the bare lithium electrode. It is observed that a much more uniform lithium dissolution/deposition on the LixSi‐modified lithium anode can be achieved as compared to the bare lithium electrode. Full cells paring the modified lithium anode with sulfur and LiFePO4 cathodes show excellent electrochemical performances in terms of rate capability and cycle stability. Compatibility of the anode enrichment method with mass production process also offers a practical way for enabling lithium metal anode for next‐generation lithium batteries.
A lithium silicide enriched protection layer is demonstrated to suppress the growth of lithium dendrites, uniformly distribute the applied current, and mitigate the parasitic side reactions in lithium metal batteries.
Using Si-based anodes in Li-ion batteries is one of the most feasible approaches to achieve high energy densities despite their disadvantages, such as low conductivity and massive volume expansion, ...which cause unstable solid electrolyte interphase layers with mechanical failure. The forefront in research and development to address the above challenges suggests the possibility of fully commercially viable cells using various structural and interfacial modifications. In particular, we present a discussion of each dimension of Si-based anodes in multiple controlled systems, including plain, hollow, porous, and uniquely engineered structures, which are further evaluated based on their anode performances, such as initial reversibility, capacity retention for extended cycles with its efficiency, degree of volume expansion tolerance, and rate capabilities, by several practical standards in half cells. With these practical considerations, multi-dimensional structures with uniform size distributions (micrometers, on average) are strongly desired to satisfy the rigorous requirements for widespread applications. Furthermore, we closely examined several full cells composed of Si-based multicomponent anodes coupled with suitable cathodes based on practical standards to propose future research directions for Si-based anodes to keep pace with the rapidly changing market demands for diverse energy storage systems.
A reaction‐protective separator that slows the growth of lithium dendrites penetrating into the separator is produced by sandwiching silica nanoparticles between two polymer separators. The reaction ...between lithium dendrites and silica nanoparticles consumes the dendrites and can extend the life of the battery by approximately five times.
Potential applications of sodium-ion batteries in grid-scale energy storage, portable electronics and electric vehicles have revitalized research interest in these batteries. However, the performance ...of sodium-ion electrode materials has not been competitive with that of lithium-ion electrode materials. Here we present sodium manganese hexacyanomanganate (Na2MnIIMnII(CN)6), an open-framework crystal structure material, as a viable positive electrode for sodium-ion batteries. We demonstrate a high discharge capacity of 209 mAh g(-1) at C/5 (40 mA g(-1)) and excellent capacity retention at high rates in a propylene carbonate electrolyte. We provide chemical and structural evidence for the unprecedented storage of 50% more sodium cations than previously thought possible during electrochemical cycling. These results represent a step forward in the development of sodium-ion batteries.
A high‐capacity stretchable graphitic carbon/Si foam electrode is enabled by a conformal self‐healing elastic polymer coating. The composite electrode exhibits high stretchability (up to 88%) and ...endures 1000 stretching–releasing cycles at 25% strain with detrimental resistance increase. Meanwhile, the electrode delivers a high reversible specific capacity of 719 mA g−1 and good cycling stability with 81% capacity retention after 100 cycles.
PDF
