A stretchable polymer channel layer for organic field‐effect transistors is obtained by spin‐coating a blend solution of polythiophene and rubber polymer. A network of the polythiophene nanofibril ...bundles surface‐embedded in the rubber matrix allows large stretchability of the polythiophene film layer.
A stretchable polyaniline nanofiber temperature sensor array with an active matrix consisting of single‐walled carbon nanotube thin‐film transistors is demonstrated. The integrated temperature sensor ...array gives mechanical stability under biaxial stretching of 30%, and the resultant spatial temperature mapping does not show any mechanical or electrical degradation.
In this work, the authors report materials, fabrication strategies, and applications of biodegradable microsupercapacitors (MSCs) built using water‐soluble (i.e., physically transient) metal (W, Fe, ...and Mo) electrodes, a biopolymer, hydrogel electrolyte (agarose gel), and a biodegradable poly(lactic‐co‐glycolic acid) substrate, encapsulated with polyanhydride. During repetitive charge/discharge cycles, the electrochemical performance of these unusual MSCs is dramatically enhanced, following from the role of pseudocapacitance that originates from metal‐oxide coatings generated by electrochemical corrosion at the interface between the water‐soluble metal electrode and the hydrogel electrolyte. Systematic studies reveal the dissolution kinetics/behaviors of each individual component of the MSCs, as well as those of the integrated devices. An encapsulation strategy that involves control over the thickness, chemistry, and molecular weight of the constituent materials provides a versatile means to engineer desired functional lifetimes. Demonstration experiments illustrate potential applications of these biodegradable MSCs as transient sources of power in the operation of light‐emitting diodes and as charging capacitors in integrated circuits for wireless power harvesting.
An entirely biodegradable microsupercapacitor is successfully fabricated using water‐soluble metal electrodes, agarose gel electrolyte, and poly(lactic‐co‐glycolic acid) substrate. The development of biodegradable, high performance supercapacitors represents an important advance in the area of transient electronics, with potentially important consequences in technologies for biomedicine, environmental monitoring, sustainable electronics, and other areas.
This study reports on the fabrication of pressure/temperature/strain sensors and all‐solid‐state flexible supercapacitors using only polydimethylsiloxane coated microporous polypyrrole/graphene foam ...composite (PDMS/PPy/GF) as a common material. A dual‐mode sensor is designed with PDMS/PPy/GF, which measures pressure and temperature with the changes of current and voltage, respectively, without interference to each other. The fabricated dual‐mode sensor shows high sensitivity, fast response/recovery, and high durability during 10 000 cycles of pressure loading. The pressure is estimated using the thermoelectric voltage induced by simultaneous increase in temperature caused by a finger touch on the sensor. Additionally, a resistor‐type strain sensor fabricated using the same PDMS/PPy/GF could detect the strain up to 50%. Flexible, high performance supercapacitor used as a power supply is fabricated with electrodes of PPy/GF for its high surface area and pseudocapacitance. Furthermore, an integrated system of such fabricated multifunctional sensors and a supercapacitor on a skin‐attachable flexible substrate using liquid–metal interconnections operates well, whereas sensors are driven by the power of the supercapacitor. This study clearly demonstrates that the appropriate choice of a single functional material enables fabrication of active multifunctional sensors for pressure, temperature, and strain, as well as the supercapacitor, that could be used in wirelessly powered wearable devices.
High‐performance solid‐state supercapacitors and multifunctional sensors sensitive to pressure, temperature, and strain are fabricated using a single common active material of microporous polydimethylsiloxane coated microporous polypyrrole/graphene foam composite. Furthermore, these sensors could be wirelessly driven with the integrated supercapacitors on a single flexible and skin‐attachable substrate.
The facile fabrication of thin and foldable self‐healing electronics on a poly(vinyl alcohol)/cellulose nanocrystal (PVA/CNC) composite film is reported. The self‐healing property of the PVA/CNC ...nanocomposite film can be activated by spraying water on the film surface, via dynamic formation of hydrogen bonding. The self‐healing efficiency of PVA/CNC is influenced by the content of CNC in the film, pH of the spraying solution, and the temperature. Via vacuum filtration and pattern transfer techniques, both a supercapacitor and a temperature sensor are fabricated on the same PVA/CNC film using gold nanosheet (AuNS) and polyaniline/multiwalled nanotube (PANI/MWCNT) electrodes. The fabricated supercapacitor with a gel‐type electrolyte exhibits a high electrochemical performance, and the thermoresistive temperature sensor shows a linear sensitivity with a fast response. Both devices exhibit superior mechanical stability and self‐healing property over 100 repetitive folding and five repetitive healing cycles, respectively, retaining the device performance owing to the percolated network of the conductive materials. This work demonstrates that our paper‐like thin PVA/CNC film‐based self‐healable devices can serve as highly durable and deformable electronics with longevity.
A paper‐like, thin, foldable, and self‐healable electronic based on poly(vinyl alcohol)/cellulose nanocrystal (PVA/CNC) nanocomposite film shows a water‐stimulated self‐healing property due to dynamic hydrogen bonding formation. A high‐performance planar supercapacitor and thermoresistive temperature sensor fabricated on the PVA/CNC substrate exhibits a high electrical self‐healing property after complete bisection as well as high mechanical stability under repetitive folding deformation.
Triple-negative breast cancer (TNBC) is a highly metastatic breast cancer with poor prognosis. In the present study, we demonstrated that Src, a non-receptor tyrosine kinase, might provide an ...effective therapeutic strategy to overcome TNBC invasion and metastasis, which are mediated via the synergistic action of the lysosomal enzyme cathepsin S (CTSS) and gelatinase MMP-9. Knock-down of MMP-9 and CTSS using siRNAs resulted in a synergistic suppression of MDA-MB-231 cell invasion, which was similarly observed with pharmacological inhibitors. During the screening of new drug candidates that suppress both CTSS and MMP-9, BJ-2302, a novel 7-azaindolin-2-one derivative, was discovered. Src, an upstream activator of both pathways (PI3K/Akt and Ras/Raf/ERK) responsible for the expression of CTSS and MMP-9, was identified as a high-affinity target of BJ-2302 (IC
: 3.23 µM) through a Src kinase assay and a drug affinity responsive target stability (DARTS) assay. BJ-2302 effectively suppressed MDA-MB-231 cell invasion (Matrigel invasion assay) and metastasis (chorioallantoic membrane assay xenografted with MDA-MB-231-luc2-tdTomato cancer cells). Unlike Z-FL-COCHO (potent CTSS inhibitor), BJ-2302 did not induce any cytotoxicity in MCF-10A normal breast epithelial cells. Additionally, BJ-2302 (1 mg/kg) strongly suppressed TNBC cell proliferation in vitro and tumor growth in a xenograft mouse tumor model. The anti-metastatic and anti-tumor effects of BJ-2302 were superior to those of Z-FL-COCHO (1 mg/kg) or batimastat (30 mg/kg), a pan-MMP inhibitor. In summary, inhibition of Src kinase suppressed TNBC tumor growth and metastasis, and Src inhibitors such as BJ-2302 may constitute a novel therapeutic tool to treat breast cancer that expresses high levels of CTSS and MMP-9.
A regioselective and chemodivergent synthetic approach for azulenolactones and azulenolactams as a new scaffold was demonstrated through Rh(III)‐catalyzed reaction of N‐methoxyazulene‐1‐carboxamides ...with sulfoxonium ylides. Sulfoxonium ylides that act as a precursor of secondary carbene was described, leading to the selective formation of azulenolactones and azulenolactams bearing two substituents on a newly introduced double bond. This method demonstrated functionalization of less reactive 2‐position of azulene to overcome the natural reactivity.
A method for the synthesis of a large number of 1,2-benzothiazines bearing pyridyl as well as carbonyl groups is developed from rhodium-catalyzed carbene insertions into aromatic C–H bonds of S-aryl ...sulfoximines using pyridotriazoles by denitrogenative cyclization followed by the elimination of alcohols. The present method involves the N–H/C–H activation of simple alkyl aryl sulfoximines and has the advantages of a broad substrate scope, high functional group tolerance, and good regioselectivity.
Abstract
Lithium-sulfur batteries have theoretical specific energy higher than state-of-the-art lithium-ion batteries. However, from a practical perspective, these batteries exhibit poor cycle life ...and low energy content owing to the polysulfides shuttling during cycling. To tackle these issues, researchers proposed the use of redox-inactive protective layers between the sulfur-containing cathode and lithium metal anode. However, these interlayers provide additional weight to the cell, thus, decreasing the practical specific energy. Here, we report the development and testing of redox-active interlayers consisting of sulfur-impregnated polar ordered mesoporous silica. Differently from redox-inactive interlayers, these redox-active interlayers enable the electrochemical reactivation of the soluble polysulfides, protect the lithium metal electrode from detrimental reactions via silica-polysulfide polar-polar interactions and increase the cell capacity. Indeed, when tested in a non-aqueous Li-S coin cell configuration, the use of the interlayer enables an initial discharge capacity of about 8.5 mAh cm
−2
(for a total sulfur mass loading of 10 mg cm
−2
) and a discharge capacity retention of about 64 % after 700 cycles at 335 mA g
−1
and 25 °C.
PDF
