TREX-DM is conceived to look for low-mass Weakly Interacting Massive Particles (WIMPs) using a gas Time Projection Chamber equipped with Micromegas readout planes at the Canfranc Underground ...Laboratory. The detector can hold in the active volume
∼
20
l
of pressurized gas up to 10 bar, corresponding to 0.30 kg of Ar or 0.16 kg of Ne. The Micromegas are read with a self-triggered acquisition, being thresholds below 0.4 keV (electron equivalent) at reach. A low background level in the lowest energy region is another essential requirement. To assess the expected background, all the relevant sources have been considered, including the measured fluxes of gamma radiation, muons and neutrons at the Canfranc Laboratory, together with the activity of most of the components used in the detector and ancillary systems, obtained in a complete assay program. The background contributions have been simulated by means of a dedicated application based on Geant4 and a custom-made code for the detector response. The background model developed for the detector presently installed in Canfranc points to levels from 1 to 10 counts
keV
-
1
kg
-
1
day
-
1
in the region of interest, making TREX-DM competitive in the search for low-mass WIMPs. A roadmap to further decrease it down to 0.1 counts
keV
-
1
kg
-
1
day
-
1
is underway.
If Dark Matter is made of Weakly Interacting Massive Particles (WIMPs) with masses below
∼
20
GeV, the corresponding nuclear recoils in mainstream WIMP experiments are of energies too close, or ...below, the experimental threshold. Gas Time Projection Chambers (TPCs) can be operated with a variety of target elements, offer good tracking capabilities and, on account of the amplification in gas, very low thresholds are achievable. Recent advances in electronics and in novel radiopure TPC readouts, especially micro-mesh gas structure (Micromegas), are improving the scalability and low-background prospects of gaseous TPCs. Here we present TREX-DM, a prototype to test the concept of a Micromegas-based TPC to search for low-mass WIMPs. The detector is designed to host an active mass of
∼
0.300
kg of Ar at 10 bar, or alternatively
∼
0.160
kg of Ne at 10 bar, with an energy threshold below 0.4 keVee, and is fully built with radiopure materials. We will describe the detector in detail, the results from the commissioning phase on surface, as well as a preliminary background model. The anticipated sensitivity of this technique may go beyond current experimental limits for WIMPs of masses of 2–8 GeV.
In the present work, we propose a simplified spectrophotometric method for determining anionic surfactants, based on the formation of the ionic pair anionic surfactant-methylene blue (AS–MB). This ...method, in relation to the conventional analytic procedure, considerably reduces not only the quantity of chloroform used in extracting the ionic pair formed, but also the time and the quantity of sample necessary to perform the assay, eliminating the filtration stage. The method has been simplified by displacing the transfer equilibrium of the ionic pair AS–MB towards the organic phase, augmenting the volumetric relationship of chloroform/sample. The method proposed has been applied in the study of primary biodegradation kinetics of linear alkylbenzenesulfonate (LAS).
The direct detection of dark matter particles requires ultra-low background conditions at energies below a few tens of keV. Radioactive isotopes are produced via cosmogenic activation in detectors ...and other materials and those isotopes constitute a background source which has to be under control. In particular, tritium is specially relevant due to its decay properties (very low endpoint energy and long half-life) when induced in the detector medium, and because it can be generated in any material as a spallation product. Quantification of cosmogenic production of tritium is not straightforward, neither experimentally nor by calculations. In this work, a method for the calculation of production rates at sea level has been developed and applied to some of the materials typically used as targets in dark matter detectors (germanium, sodium iodide, argon and neon); it is based on a selected description of tritium production cross sections over the entire energy range of cosmic nucleons. Results have been compared to available data in the literature, either based on other calculations or from measurements. The obtained tritium production rates, ranging from a few tens to a few hundreds of nuclei per kg and per day at sea level, point to a significant contribution to the background in dark matter experiments, requiring the application of specific protocols for target material purification, material storing underground and limiting the time the detector is on surface during the building process in order to minimize the exposure to the most dangerous cosmic ray components.
An α-amylase and a protease suitable to be used as detergent additives in Cleaning-In-Place processes in the food industry have been studied in terms of their stability during storage as well as ...under washing conditions. Enzymatic solutions have been prepared with addition of two non-ionic surfactants at the pH of operation, an amine oxide and an alkylpolyglucoside. Activity assays have been carried out in order to obtain deactivation kinetics. The study of stability at storage during 21 days at 40 °C and 60 °C reveals that the enzymatic solutions in the absence of surfactants preserve their activity for longer. The protease showed to be more sensitive to thermal deactivation, undergoing a complete loss of activity at 60 °C before 24 h in all solutions studied. On the other hand, activity assays have been carried out at concentrations, time and temperature values usually found during cleaning processes of hard surfaces. The presence of the alkylpolyglucoside showed to preserve enzymatic activity of α-amylase at all temperatures assayed. The amine oxide, nevertheless, seemed to contribute to α-amylase deactivation and did not have a significant effect on protease. The results of this work suggest the need of stabilize enzymes in detergent formulations even when they do not contain potential denaturants.
The measurement of the direction of WIMP-induced nuclear recoils is a compelling but technologically challenging strategy to provide an unambiguous signature of the detection of Galactic dark matter. ...Most directional detectors aim to reconstruct the dark-matter-induced nuclear recoil tracks, either in gas or solid targets. The main challenge with directional detection is the need for high spatial resolution over large volumes, which puts strong requirements on the readout technologies. In this paper we review the various detector readout technologies used by directional detectors. In particular, we summarize the challenges, advantages and drawbacks of each approach, and discuss future prospects for these technologies.
PDF
