Aims. The purpose of this work is the characterization of the radial distribution of dust, stars, gas, and star-formation rate (SFR) in a sub-sample of 18 face-on spiral galaxies extracted from the ...DustPedia sample. Methods. This study is performed by exploiting the multi-wavelength DustPedia database, from ultraviolet (UV) to sub-millimeter bands, in addition to molecular (12CO) and atomic (Hi) gas maps and metallicity abundance information available in the literature. We fitted the surface-brightness profiles of the tracers of dust and stars, the mass surface-density profiles of dust, stars, molecular gas, and total gas, and the SFR surface-density profiles with an exponential curve and derived their scale-lengths. We also developed a method to solve for the CO-to-H2 conversion factor (αCO) per galaxy by using dust- and gas-mass profiles. Results. Although each galaxy has its own peculiar behavior, we identified a common trend of the exponential scale-lengths versus wavelength. On average, the scale-lengths normalized to the B-band 25 mag/arcsec2 radius decrease from UV to 70 μm, from 0.4 to 0.2, and then increase back up to ~0.3 at 500 microns. The main result is that, on average, the dust-mass surface-density scale-length is about 1.8 times the stellar one derived from IRAC data and the 3.6 μm surface brightness, and close to that in the UV. We found a mild dependence of the scale-lengths on the Hubble stage T: the scale-lengths of the Herschel bands and the 3.6 μm scale-length tend to increase from earlier to later types, the scale-length at 70 μm tends to be smaller than that at longer sub-mm wavelength with ratios between longer sub-mm wavelengths and 70 μm that decrease with increasing T. The scale-length ratio of SFR and stars shows a weak increasing trend towards later types. Our αCO determinations are in the range (0.3−9) M⊙ pc-2 (K km s-1)-1, almost invariant by using a fixed dust-to-gas ratio mass (DGR) or a DGR depending on metallicity gradient.
It has recently been suggested that galaxies in the early Universe could have grown through the accretion of cold gas, and that this may have been the main driver of star formation and stellar mass ...growth. Because the cold gas is essentially primordial, it has a very low abundance of elements heavier than helium (referred to as metallicity). If funnelled to the centre of a galaxy, it will result in the central gas having an overall lower metallicity than gas further from the centre, because the gas further out has been enriched by supernovae and stellar winds, and not diluted by the primordial gas. Here we report chemical abundances across three rotationally supported star-forming galaxies at redshift z 3, only 2 Gyr after the Big Bang. We find 'inverse' gradients, with the central, star-forming regions having lower metallicities than less active ones, which is opposite to what is seen in local galaxies. We conclude that the central gas has been diluted by the accretion of primordial gas, as predicted by 'cold flow' models.
Aims.
The purpose of this work is the characterization of the main scaling relations between all of the interstellar medium (ISM) components, namely dust, atomic, molecular, and total gas, and ...gas-phase metallicity, as well as other galaxy properties, such as stellar mass (
M
star
) and galaxy morphology, for late-type galaxies in the Local Universe.
Methods.
This study was performed by extracting late-type galaxies from the entire DustPedia sample and by exploiting the large and homogeneous dataset available thanks to the DustPedia project. The sample consists of 436 galaxies with morphological stage spanning from
T
= 1−10,
M
star
from 6 × 10
7
to 3 × 10
11
M
⊙
, star formation rate from 6 × 10
−4
to 60
M
⊙
yr
−1
, and oxygen abundance from 12 + log(O/H) = 8−9.5. Molecular and atomic gas data were collected from the literature and properly homogenized. All the masses involved in our analysis refer to the values within the optical disks of galaxies. The scaling relations involving the molecular gas are studied by assuming both a constant and a metallicity-dependent CO-to-H
2
conversion factor (
X
CO
). The analysis was performed by means of the survival analysis technique, in order to properly take into account the presence of both detection and nondetection in the data.
Results.
We confirm that the dust mass correlates very well with the total gas mass, and find –for the first time– that the dust mass correlates better with the atomic gas mass than with the molecular one. We characterize important mass ratios such as the gas fraction, the molecular-to-atomic gas mass ratio, the dust-to-total gas mass ratio (DGR), and the dust-to-stellar mass ratio, and study how they relate to each other, to galaxy morphology, and to gas-phase metallicity. Only the assumption of a metallicity-dependent
X
CO
reproduces the expected decrease of the DGR with increasing morphological stage and decreasing gas-phase metallicity, with a slope of about 1. The DGR, the gas-phase metallicity, and the dust-to-stellar mass ratio are, for our galaxy sample, directly linked to galaxy morphology. The molecular-to-atomic gas mass ratio and the DGR show a positive correlation for low molecular gas fractions, but for galaxies rich in molecular gas this trend breaks down. To our knowledge, this trend has never been found before, and provides new constraints for theoretical models of galaxy evolution and a reference for high-redshift studies. We discuss several scenarios related to this finding.
Conclusions.
The DustPedia database of late-type galaxies is an extraordinary tool for the study of the ISM scaling relations, thanks to its homogeneous collection of data for the different ISM components. The database is made publicly available to the whole community.
Context.
We describe the atomic and molecular data that were used for the abundance analyses of FGK-type stars carried out within the
Gaia
-ESO Public Spectroscopic Survey in the years 2012 to 2019. ...The
Gaia
-ESO Survey is one among several current and future stellar spectroscopic surveys producing abundances for Milky-Way stars on an industrial scale.
Aims.
We present an unprecedented effort to create a homogeneous common line list, which was used by several abundance analysis groups using different radiative transfer codes to calculate synthetic spectra and equivalent widths. The atomic data are accompanied by quality indicators and detailed references to the sources. The atomic and molecular data are made publicly available at the CDS.
Methods.
In general, experimental transition probabilities were preferred but theoretical values were also used. Astrophysical
gf
-values were avoided due to the model-dependence of such a procedure. For elements whose lines are significantly affected by a hyperfine structure or isotopic splitting, a concerted effort has been made to collate the necessary data for the individual line components. Synthetic stellar spectra calculated for the Sun and Arcturus were used to assess the blending properties of the lines. We also performed adetailed investigation of available data for line broadening due to collisions with neutral hydrogen atoms.
Results.
Among a subset of over 1300 lines of 35 elements in the wavelength ranges from 475 to 685 nm and from 850 to 895 nm, we identified about 200 lines of 24 species which have accurate
gf
-values and are free of blends in the spectra of the Sun and Arcturus. For the broadening due to collisions with neutral hydrogen, we recommend data based on Anstee-Barklem-O’Mara theory, where possible. We recommend avoiding lines of neutral species for which these are not available. Theoretical broadening data by R.L. Kurucz should be used for Sc
II
, Ti
II
, and Y
II
lines; additionally, for ionised rare-earth species, the Unsöld approximation with an enhancement factor of 1.5 for the line width can be used.
Conclusions.
The line list has proven to be a useful tool for abundance determinations based on the spectra obtained within the
Gaia
-ESO Survey, as well as other spectroscopic projects. Accuracies below 0.2 dex are regularly achieved, where part of the uncertainties are due to differences in the employed analysis methods. Desirable improvements in atomic data were identified for a number of species, most importantly Al
I
, S
I
, and Cr
II
, but also Na
I
, Si
I
, Ca
II
, and Ni
I
.
Context. To calibrate automatic pipelines that determine atmospheric parameters of stars, one needs a sample of stars, or “benchmark stars”, with well-defined parameters to be used as a reference. ...Aims. We provide detailed documentation of the iron abundance determination of the 34 FGK-type benchmark stars that are selected to be the pillars for calibration of the one billion Gaia stars. They cover a wide range of temperatures, surface gravities, and metallicities. Methods. Up to seven different methods were used to analyze an observed spectral library of high resolutions and high signal-to-noise ratios. The metallicity was determined by assuming a value of effective temperature and surface gravity obtained from fundamental relations; that is, these parameters were known a priori and independently from the spectra. Results. We present a set of metallicity values obtained in a homogeneous way for our sample of benchmark stars. In addition to this value, we provide detailed documentation of the associated uncertainties. Finally, we report a value of the metallicity of the cool giant ψ Phe for the first time.
Abstract
We present the results of the spectroscopic and photometric follow-up of two field galaxies that were selected as possible stellar counterparts of local high-velocity clouds. Our analysis ...shows that the two systems are distant (D > 20 Mpc) dwarf irregular galaxies unrelated to the local H i clouds. However, the newly derived distance and structural parameters reveal that the two galaxies have luminosities and effective radii very similar to the recently identified ultra diffuse galaxies (UDGs). At odds with classical UDGs, they are remarkably isolated, having no known giant galaxy within ∼2.0 Mpc. Moreover, one of them has a very high gas content compared to galaxies of similar stellar mass, with a H i
to stellar mass ratio
$M_{\rm H\, {\small {I}}}/M_{\rm \star }\sim 90$
, typical of almost-dark dwarfs. Expanding on this finding, we show that extended dwarf irregulars overlap the distribution of UDGs in the MV
versus log r
e plane and that the sequence including dwarf spheroidals, dwarf irregulars and UDGs appears as continuously populated in this plane. This may suggest an evolutionary link between dwarf irregulars and UDGs.
Context. Open clusters offer a unique possibility to study the time evolution of the radial metallicity gradients of several elements in our Galaxy, because they span large intervals in age and ...Galactocentric distance, and both quantities can be more accurately derived than for field stars. Aims. We re-address the issue of the Galactic metallicity gradient and its time evolution by comparing the empirical gradients traced by a sample of 45 open clusters with a chemical evolution model of the Galaxy. Methods. At variance with previous similar studies, we have collected from the literature only abundances derived from high-resolution spectra. The clusters have Galactocentric distances $7 \la R_{\rm GC} \la 22$ kpc and ages from ~30 Myr to 11 Gyr. We also consider the α-elements Si, Ca, Ti, and the iron-peak elements Cr and Ni. Cepheids trace instead the present-day Fe gradient in the inner parts of the disk. Results. The data for iron-peak and α-elements indicate a steep metallicity gradient for $R_{\rm GC}\la 12$ kpc and a plateau at larger radii. The time evolution of the metallicity distribution is characterized by a uniform increase of the metallicity at all radii, preserving the shape of the gradient, with marginal evidence for a flattening of the gradient with time in the radial range 7-12 kpc. Our model is able to reproduce the main features of the metallicity gradient and its evolution with an infall law exponentially decreasing with radius and with a collapse time scale of the order of 8 Gyr at the solar radius. This results in a rapid collapse in the inner regions, i.e. $R_{\rm GC}\la 12$ kpc (that we associate with an early phase of disk formation from the collapse of the halo) and in a slow inflow of material per unit area in the outer regions at a constant rate with time (that we associate with accretion from the intergalactic medium). An additional uniform inflow per unit disk area would help to better reproduce the metallicity plateau at large Galactocentric radii, but it is difficult to reconcile with the present-day radial behaviour of the star formation rate. Conclusions. Our results favour a scenario where the Galactic disk is formed inside-out by the rapid collapse of the halo and by a subsequent continuous accretion of intergalactic gas
Aims. We compare the far-infrared to sub-millimetre dust emission properties measured in high Galactic latitude cirrus with those determined in a sample of 204 late-type DustPedia galaxies. The aim ...is to verify if it is appropriate to use Milky Way dust properties to derive dust masses in external galaxies. Methods. We used Herschel observations and atomic and molecular gas masses to estimate ϵ(250 μm), the disc-averaged dust emissivity at 250 μm, and from this, the absorption cross section per H atom σ(250 μm) and per dust mass κ(250 μm). The emissivity ϵ(250 μm) requires one assumption, which is the CO-to-H2 conversion factor, and the dust temperature is additionally required for σ(250 μm); yet another constraint on the dust-to-hydrogen ratio D/H, depending on metallicity, is required for κ(250 μm). Results. We find ϵ(250 μm) = 0.82 ± 0.07 MJy sr−1 (1020 H cm−2)−1 for galaxies with 4 < F(250 μm)/F(500 μm) < 5. This depends only weakly on the adopted CO-to-H2 conversion factor. The value is almost the same as that for the Milky Way at the same colour ratio. Instead, for F(250 μm)/F(500 μm) > 6, ϵ(250 μm) is lower than predicted by its dependence on the heating conditions. The reduction suggests a variation in dust emission properties for spirals of earlier type, higher metallicity, and with a higher fraction of molecular gas. When the standard emission properties of Galactic cirrus are used for these galaxies, their dust masses might be underestimated by up to a factor of two. Values for σ(250 μm) and κ(250 μm) at the Milky Way metallicity are also close to those of the cirrus. Mild trends of the absorption cross sections with metallicity are found, although the results depend on the assumptions made.
Context. Open clusters are distributed all across the Galactic disk and are convenient tracers of its properties. In particular, outer disk clusters bear a key role in the investigation of the ...chemical evolution of the Galactic disk. Aims. The goal of this study is to derive homogeneous elemental abundances for a sample of ten outer disk open clusters, and investigate possible links with disk structures such as the Galactic anticentre stellar structure. Methods. We analysed high-resolution spectra of red giants, obtained from the Keck-HIRES and VLT-UVES archives. We derived elemental abundances and stellar atmosphere parameters by means of the classical equivalent width method. We also performed orbit integrations using proper motions. Results. The Fe abundances we derive trace a shallow negative radial metallicity gradient of slope −0.027 ± 0.007 dex kpc-1 in the outer 12 kpc of the disk. The α/Fe gradient appears flat, with a slope of 0.006 ± 0.007 dex kpc-1. The two outermost clusters (Be 29 and Sau 1) appear to follow elliptical orbits. The cluster Be 20 also exhibits a peculiar orbit with a large excursion above the plane. Conclusions. The irregular orbits of the three most metal poor clusters (two of which are located at the edge of the Galactic disk), are compatible with an inside-out formation scenario for the Milky Way in which extragalactic material is accreted onto the outer disk. This is the case if the irregular orbits of these clusters are confirmed by more robust astrometric measurements such as those of the Gaia mission. We cannot determine whether Be 20, Be 29, and Sau 1 are of extragalactic origin, as they may be old, genuine Galactic clusters whose orbits were perturbed by accretion events or minor mergers in the past 5 Gyr, or they may be representants of the thick disk population. The nature of these objects is intriguing and deserves further investigation in the near future.
Context. We have entered an era of large spectroscopic surveys in which we can measure, through automated pipelines, the atmospheric parameters and chemical abundances for large numbers of stars. ...Calibrating these survey pipelines using a set of “benchmark stars” in order to evaluate the accuracy and precision of the provided parameters and abundances is of utmost importance. The recent proposed set of Gaia FGK benchmark stars has up to five metal-poor stars but no recommended stars within −2.0 < Fe/H < −1.0 dex. However, this metallicity regime is critical to calibrate properly. Aims. In this paper, we aim to add candidate Gaia benchmark stars inside of this metal-poor gap. We began with a sample of 21 metal-poor stars which was reduced to 10 stars by requiring accurate photometry and parallaxes, and high-resolution archival spectra. Methods. The procedure used to determine the stellar parameters was similar to the previous works in this series for consistency. The difference was to homogeneously determine the angular diameter and effective temperature (Teff) of all of our stars using the Infrared Flux Method utilizing multi-band photometry. The surface gravity (log g) was determined through fitting stellar evolutionary tracks. The Fe/H was determined using four different spectroscopic methods fixing the Teff and log g from the values determined independent of spectroscopy. Results. We discuss, star-by-star, the quality of each parameter including how it compares to literature, how it compares to a spectroscopic run where all parameters are free, and whether Fe i ionisation-excitation balance is achieved. Conclusions. From the 10 stars, we recommend a sample of five new metal-poor benchmark candidate stars which have consistent Teff, log g, and Fe/H determined through several means. These stars, which are within −1.3 < Fe/H < −1.0, can be used for calibration and validation purpose of stellar parameter and abundance pipelines and should be of highest priority for future interferometric studies.
PDF
