The goal of this paper is to present a dedicated high-performance computing (HPC) infrastructure which is used in the development of a so-called reduced-order model (ROM) for simulating the outcomes ...of interventional procedures which are contemplated in the treatment of valvular heart conditions. Following a brief introduction to the problem, the paper presents the design of a model execution environment, in which representative cases can be simulated and the parameters of the ROM fine-tuned to enable subsequent deployment of a decision support system without further need for HPC. The presentation of the system is followed by information concerning its use in processing specific patient cases in the context of the EurValve international collaboration.
Abstract The TOTEM collaboration has measured the elastic proton-proton differential cross section $$\mathrm{d}\sigma /\mathrm{d}t$$ d σ / d t at $$\sqrt{s}=13$$ s = 13 TeV LHC energy using ...dedicated $$\beta ^{*}=90$$ β ∗ = 90 m beam optics. The Roman Pot detectors were inserted to 10 $$\sigma $$ σ distance from the LHC beam, which allowed the measurement of the range 0.04 GeV $$^{2}$$ 2 ; 4 GeV $$^{2}$$ 2 $$$$ in four-momentum transfer squared | t |. The efficient data acquisition allowed to collect about 10 $$^{9}$$ 9 elastic events to precisely measure the differential cross-section including the diffractive minimum (dip), the subsequent maximum (bump) and the large-| t | tail. The average nuclear slope has been found to be $$B=(20.40 \pm 0.002^{\mathrm{stat}} \pm 0.01^{\mathrm{syst}})~$$ B = ( 20.40 ± 0 . 002 stat ± 0 . 01 syst ) GeV $$^{-2}$$ - 2 in the | t |-range 0.04–0.2 GeV $$^{2}$$ 2 . The dip position is $$|t_{\mathrm{dip}}|=(0.47 \pm 0.004^{\mathrm{stat}} \pm 0.01^{\mathrm{syst}})~$$ | t dip | = ( 0.47 ± 0 . 004 stat ± 0 . 01 syst ) GeV $$^{2}$$ 2 . The differential cross section ratio at the bump vs. at the dip $$R=1.77\pm 0.01^{\mathrm{stat}}$$ R = 1.77 ± 0 . 01 stat has been measured with high precision. The series of TOTEM elastic pp measurements show that the dip is a permanent feature of the pp differential cross-section at the TeV scale.
The TOTEM collaboration has measured the proton–proton total cross section at
s
=
13
TeV
with a luminosity-independent method. Using dedicated
β
∗
=
90
m
beam optics, the Roman Pots were inserted ...very close to the beam. The inelastic scattering rate has been measured by the T1 and T2 telescopes during the same LHC fill. After applying the optical theorem the total proton–proton cross section is
σ
tot
=
(
110.6
±
3.4
) mb, well in agreement with the extrapolation from lower energies. This method also allows one to derive the luminosity-independent elastic and inelastic cross sections:
σ
el
=
(
31.0
±
1.7
)
mb
and
σ
inel
=
(
79.5
±
1.8
)
mb
.
The TOTEM experiment at the LHC has performed the first measurement at
s
=
13
TeV
of the
ρ
parameter, the real to imaginary ratio of the nuclear elastic scattering amplitude at
t
=
0
, obtaining the ...following results:
ρ
=
0.09
±
0.01
and
ρ
=
0.10
±
0.01
, depending on different physics assumptions and mathematical modelling. The unprecedented precision of the
ρ
measurement, combined with the TOTEM total cross-section measurements in an energy range larger than
10
TeV
(from 2.76 to
13
TeV
), has implied the exclusion of all the models classified and published by COMPETE. The
ρ
results obtained by TOTEM are compatible with the predictions, from other theoretical models both in the Regge-like framework and in the QCD framework, of a crossing-odd colourless 3-gluon compound state exchange in the
t
-channel of the proton–proton elastic scattering. On the contrary, if shown that the crossing-odd 3-gluon compound state
t
-channel exchange is not of importance for the description of elastic scattering, the
ρ
value determined by TOTEM would represent a first evidence of a slowing down of the total cross-section growth at higher energies. The very low-|
t
| reach allowed also to determine the absolute normalisation using the Coulomb amplitude for the first time at the LHC and obtain a new total proton–proton cross-section measurement
σ
tot
=
(
110.3
±
3.5
)
mb
, completely independent from the previous TOTEM determination. Combining the two TOTEM results yields
σ
tot
=
(
110.5
±
2.4
)
mb
.
The TOTEM collaboration has measured the elastic proton-proton differential cross section
d
σ
/
d
t
at
s
=
13
TeV LHC energy using dedicated
β
∗
=
90
m beam optics. The Roman Pot detectors were ...inserted to 10
σ
distance from the LHC beam, which allowed the measurement of the range 0.04 GeV
2
; 4 GeV
2
in four-momentum transfer squared |
t
|. The efficient data acquisition allowed to collect about 10
9
elastic events to precisely measure the differential cross-section including the diffractive minimum (dip), the subsequent maximum (bump) and the large-|
t
| tail. The average nuclear slope has been found to be
B
=
(
20.40
±
0
.
002
stat
±
0
.
01
syst
)
GeV
-
2
in the |
t
|-range 0.04–0.2 GeV
2
. The dip position is
|
t
dip
|
=
(
0.47
±
0
.
004
stat
±
0
.
01
syst
)
GeV
2
. The differential cross section ratio at the bump vs. at the dip
R
=
1.77
±
0
.
01
stat
has been measured with high precision. The series of TOTEM elastic pp measurements show that the dip is a permanent feature of the pp differential cross-section at the TeV scale.
How to Use Google App Engine for Free Computing Malawski, M.; Kuźniar, M.; Wójcik, P. ...
IEEE internet computing,
2013-Jan.-Feb., 2013, 2013-01-00, 20130101, Volume:
17, Issue:
1
Journal Article
Peer reviewed
Can the Google App Engine cloud service be used, free of charge, to execute parameter study problems? That question drove this research, which is founded on the App Engine's newly developed Task ...Queue API. The authors created a simple and extensible framework implementing the master-worker model to enable usage of the App Engine application servers as computational nodes. This article presents and discusses the results of the feasibility study, as well as compares the solution with EC2, Amazon's free cloud offering.
This paper presents the design of a system that supports execution of HLA (high level architecture) distributed interactive simulations in an unreliable grid environment. The design of the ...architecture is based on the OGSA (Open Grid Services Architecture) concept that allows for modularity and compatibility with grid services already being developed. First of all, we focus on the part of the system which is responsible for migration of a HLA-connected component or components of the distributed application in the grid environment. We present a runtime support library for easily plugging HLA simulations into the grid services framework. We also present the impact of execution management (namely migration) on overall system performance.
We describe an analysis comparing the p¯p elastic cross section as measured by the D0 Collaboration at a center-of-mass energy of 1.96 TeV to that in pp collisions as measured by the TOTEM ...Collaboration at 2.76, 7, 8, and 13 TeV using a model-independent approach. The TOTEM cross sections, extrapolated to a center-of-mass energy of √s=1.96 TeV, are compared with the D0 measurement in the region of the diffractive minimum and the second maximum of the pp cross section. The two data sets disagree at the 3.4σ level and thus provide evidence for the t-channel exchange of a colorless, C-odd gluonic compound, also known as the odderon. We combine these results with a TOTEM analysis of the same C-odd exchange based on the total cross section and the ratio of the real to imaginary parts of the forward elastic strong interaction scattering amplitude in pp scattering for which the significance is between 3.4σ and 4.6σ. The combined significance is larger than 5σ and is interpreted as the first observation of the exchange of a colorless, C-odd gluonic compound.
Abstract The TOTEM collaboration at the CERN LHC has measured the differential cross-section of elastic proton–proton scattering at $$\sqrt{s} = 8\,\mathrm{TeV}$$ s = 8 TeV in the squared ...four-momentum transfer range $$0.2\,\mathrm{GeV^{2}}< |t| < 1.9\,\mathrm{GeV^{2}}$$ 0.2 GeV 2 < | t | < 1.9 GeV 2 . This interval includes the structure with a diffractive minimum (“dip”) and a secondary maximum (“bump”) that has also been observed at all other LHC energies, where measurements were made. A detailed characterisation of this structure for $$\sqrt{s} = 8\,\mathrm{TeV}$$ s = 8 TeV yields the positions, $$|t|_{\mathrm{dip}} = (0.521 \pm 0.007)\,\mathrm{GeV^2}$$ | t | dip = ( 0.521 ± 0.007 ) GeV 2 and $$|t|_{\mathrm{bump}} = (0.695 \pm 0.026)\,\mathrm{GeV^2}$$ | t | bump = ( 0.695 ± 0.026 ) GeV 2 , as well as the cross-section values, $$\left. {\mathrm{d}\sigma /\mathrm{d}t}\right| _{\mathrm{dip}} = (15.1 \pm 2.5)\,\mathrm{{\mu b/GeV^2}}$$ d σ / d t dip = ( 15.1 ± 2.5 ) μ b / GeV 2 and $$\left. {\mathrm{d}\sigma /\mathrm{d}t}\right| _{\mathrm{bump}} = (29.7 \pm 1.8)\,\mathrm{{\mu b/GeV^2}}$$ d σ / d t bump = ( 29.7 ± 1.8 ) μ b / GeV 2 , for the dip and the bump, respectively.
PDF
