Abstract
Nano-lubricants offer improved tribological properties in many applications, such as machines and engines. The presence of nanoparticles in the lubricating oil affects its wear, friction, ...thermal, chemical and physical properties in many ways. Titanium dioxide (TiO
2
) is a promising lubricant additive for enhanced engine efficiency. This article reports the effect of 10 W-30 pure base engine oil suspended TiO
2
nanoparticles. Four different volume concentrations (0.01%, 0.025%, 0.050% and 0.075%) of TiO
2
nanoparticles in the base lubricating oil are used for the analysis. The tribological tests were performed at ambient temperature as well as at 75 °C using a four ball tribometer. Scanning electron microscope (SEM) and Alicona Inginite Focus G5 microscope were used to analyze the worn surface. The results show that the surface-modified TiO
2
nanoparticles can remarkably improve the load-carrying capacity, the friction reducing, and anti-wear abilities of the additive oil. The diameter of the wear trace and the coefficient of friction are the tribological properties analyzed for the nano-lubricant prepared at different volume concentration (VC). It was found that the diameter of the wear scar and the coefficient of friction increase with increasing VC of TiO
2
nanoparticles in the lubricating oil. The main objective of the paper is to present the recent progress and, consequently, to develop a comprehensive understanding of the tribological behavior of engine oil mixed with TiO
2
nanoparticles.
Environmental activism, defined as a range of difficult pro-environmental behaviors, is analyzed within the conceptual framework of Significance Quest Theory (SQT). In Study 1, 40 interviews were ...carried out on two groups of people in the European Union: Committed Actors for Nature (CANs, n = 25) versus Committed Actors for Society (CASs, n = 15). Results demonstrated that Significance Quest (SQ) motivates each group to be strongly committed to their chosen action and the main difference between them being in their ideology (pro-social vs. pro-environmental). In Study 2 (N = 131), the relationship between SQ and intention to enact difficult pro-environmental behaviors was assessed. Results suggested that the higher the SQ, the higher the tendency to enact difficult pro-environmental behaviors, but not average or easy ones. Moreover, the higher the pro-environmental ideology, the stronger the indirect effect of SQ on difficult behavior through willingness to sacrifice.
In light of the urgent need to develop environmentally friendly materials that, at some point, will allow the reduction of concrete and, consequently, cement consumption-while at the same time ...allowing the reuse of waste and industrial by-products-alkali-activated fly ash (AAFA) geopolymer composite emerges as a material of great interest. The aim of this study was to investigate the physico-mechanical performance of composites based on AAFA binders and the effect of different types of aggregates on these properties. The experimental results indicate variations in flexural and compressive strength, which are influenced both by the nature and particle size distribution of aggregates and the binder-to-aggregate ratio. The analysis of the samples highlighted changes in porosity, both in distribution and pore size, depending on the nature of the aggregates. This supports the evolution of physico-mechanical performance indicators.
The damage due to embrittlement of the sintering furnace belt and its replacement after a certain time of use represents a problem for the manufacturers of sintered parts. Finding out the reason for ...the damage could help to increase the duration of its operation. This research aimed to investigate the causes of embrittlement, considering both the temperatures and atmosphere of the sintering furnace to which the furnace belt is exposed during its operation. The furnace belt was made of AISI 314 stainless steel. Optical microscopy, scanning electron microscopy, combined with energy-dispersive X-ray analysis, X-ray diffraction and the Vickers hardness tests were used to analyze the microstructural, structural, compositional and hardness changes of the belt used for 45 weeks. Cr and Mn carbides, the oxides of Fe, Cr, Mn and Si were found to form at the edge of the furnace belt. The grains grew after 45 weeks of use, approximately 10 times, due to thermal cycles in an endothermic gas atmosphere to which the belt was exposed. Also, the hardness increased from 226 to 338 HV
, due to the formation of carbide and oxide-type compounds. All these results represent a starting point in optimizing the lifetime of the sintering furnace belt.
Friction and wear experiments were performed on carbon fiber-reinforced polymer (CFRP) composites, and the tribological behavior of these materials under boundary lubrication (based on the 5100 4T 10 ...W-30 engine oil with TiO2 Degussa P25 nanoparticles) was investigated. Experiments were carried out in two directions: one at a different normal load from 6 to 16 N and one at a low sliding speed of 110 mm/min under boundary lubrication conditions. The obtained results reveal the stick-slip effect and the static and dynamic coefficient of friction decreased slightly with increasing normal applied load on the carbon fiber reinforced polymer composite pairs. The second direction highlights through experimental tests on the pin on disc tribometer that the friction coefficient increases with the increase in normal load (20–80 N) and sliding velocity (0.4–2.4 m/s). On the other hand, it is found that the friction coefficient is slightly lower than in the stick-slip phase. During the running-in process, the friction coefficient of the CFRP pair increases steadily as the rubbing time increases, and after a certain rubbing period, it remains constant regardless of the material of the counter face. The obtained results show that for the observed interval, the influence of normal load and sliding velocity have relatively small fraction coefficients and low wear depths. A 3D analysis of the profile demonstrated the texture of wear marks and tracks of these engineering composite materials. Furthermore, the height variations of wear marks and the morphologies of the worn surfaces of specimens under boundary lubrication conditions were analyzed.
For use in crystal glass production, quartz sand must contain less than 0.09% iron. If the sand contains more than 0.09% Fe, the iron must be removed. In the present study, quartz sand from tailings ...ponds near the Cluj area of Romania is analyzed for potential use in the glass industry, after magnetic separation. The particle size distribution of raw sand was determined, and mineralogical analyses was realized. Using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX), morphology and elemental distribution maps on the particle was performed. The evolution of the iron content versus the particle size was analyzed. Using X-ray diffraction, the phases occurring in the sand were investigated in relation to the particle size. Magnetic separation with two magnets, having different energy, was performed for identifying the phases attached to the magnetic particles. Magnetic hysteresis measurements evidenced complex and multiple iron phase behavior.
Nanocrystalline powders from the Permalloy family, Ni
Fe
, Ni
Fe
Mo
, and Ni
Fe
Cu
Mo
, were obtained by mechanical alloying starting from elemental powders. All compositions were milled for up to 24 ...h in a high-energy planetary ball mill. The powders were single phase and nanocrystalline as determined by X-ray diffraction studies, with larger flatted particle sizes for Ni
Fe
(about 400 μm) and Ni
Fe
Cu
Mo
(about 470 μm), and smaller particle sizes for Ni
Fe
Mo
(about 170 μm). The homogeneity of the samples was verified by energy-dispersive X-ray spectroscopy (EDX). Soft magnetic composites were obtained by adding 3% of Araldite to the powders, followed by compaction at 700 MPa, and then polymerization. A very good powder covering by the polymer layer was proven by EDX elementals maps. The influence of composition change on the electrical resistivity of the compacts was studied. Hysteresis measurements in static and dynamic fields of up to 10 kHz were recorded, showing the influence of composition and particle size on the compact properties.
Soft magnetic composite (SMC) cores have been obtained by Spark Plasma Sintering (SPS) using pseudo core–shell powders. Pseudo core–shell powders are formed by a core of soft magnetic particle ...(nanocrystalline permalloy or supermalloy) surrounded by a thin layer (shell) of nanosized soft ferrite (Mn0.5Zn0.5Fe2O4). Three compositions of pseudo core–shell powders were prepared, with 1, 2 and 3 wt.% of manganese–zinc mixt ferrite. The pseudo core–shell powders were compacted by SPS at temperatures between 500 and 700 °C, with a holding time ranging from 0 to 10 min. Several techniques have been used for characterization of the samples, both, powders and compacts X-ray diffraction (XRD, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), magnetic hysteresis measurements (DC and AC) and electrical resistivity. The electrical resistivity is in the order of 1 × 10−2 Ωm, 3–4 orders of magnitude higher than supermalloy electrical resistivity. The SPS at lower temperatures (500 °C) conserves the initial phases of the composite, but increasing the sintering temperature and/or sintering time produces a solid-state reaction between the alloy and ferrite phases, with negative consequence on the magnetic properties of the compacts. The initial relative permeability is around 40 and remains constant until to 2000 Hz. The power losses are lower than 2 W/kg until to 2000 Hz.
Here, we report synthesis and investigations of bulk and nano-sized La(0.7−x)EuxBa0.3MnO3 (x ≤ 0.4) compounds. The study presents a comparison between the structural and magnetic properties of the ...nano- and polycrystalline manganites La(0.7−x)EuxBa0.3MnO3, which are potential magnetocaloric materials to be used in domestic magnetic refrigeration close to room temperature. The parent compound, La0.7Ba0.3MnO3, has Curie temperature TC = 340 K. The magnetocaloric effect is at its maximum around TC. To reduce this temperature below 300 K, we partially replaced the La ions with Eu ions. A solid-state reaction was used to prepare bulk polycrystalline materials, and a sol-gel method was used for the nanoparticles. X-ray diffraction was used for the structural characterization of the compounds. Transmission electron spectroscopy (TEM) evidenced nanoparticle sizes in the range of 40–80 nm. Iodometry and inductively coupled plasma optical emission spectrometry (ICP-OES) was used to investigate the oxygen content of the studied compounds. Critical exponents were calculated for all samples, with bulk samples being governed by tricritical mean field model and nanocrystalline samples governed by the 3D Heisenberg model. The bulk sample with x = 0.05 shows room temperature phase transition TC = 297 K, which decreases with increasing x for the other samples. All nano-sized compounds show lower TC values compared to the same bulk samples. The magnetocaloric effect in bulk samples revealed a greater magnetic entropy change in a relatively narrow temperature range, while nanoparticles show lower values, but in a temperature range several times larger. The relative cooling power for bulk and nano-sized samples exhibit approximately equal values for the same substitution level, and this fact can substantially contribute to applications in magnetic refrigeration near room temperature. By combining the magnetic properties of the nano- and polycrystalline manganites, better magnetocaloric materials can be obtained.
Soft magnetic composites (SMCs) need a stable matrix to apply heat treatments for enhancing their magnetic characteristics. A stable matrix can be offered by alumina, but the densification of the ...ferromagnetic particles covered by this oxide (by sintering) can be very difficult. This paper proposes a feasible synthesis route for obtaining alumina matrix SMCs. An Fe-Si-Al alloy with nominal composition Fe85Si9Al6 was obtained by mechanical alloying of elemental Fe, Si, and Al powders, and further, the as-milled powders were superficially oxidized by immersion in HCl solution. The oxide layer was composed of iron, silicon, and aluminum oxides, as the Fourier-transform infrared spectroscopy technique revealed. The Fe-Si-Al@oxide powder was densified by the spark plasma sintering technique-SPS. Upon sintering, a continuous matrix of oxide (mainly alumina) was formed by the reaction of the Fe-Si-Al powder coreswith their oxide layer. The main part of the composite compacts after sintering consisted of an Fe
Si-ordered phase dispersed in an oxide matrix. The DC and AC tests of magnetic composite compacts showed that upon increasing the sintering temperature, the density, magnetic induction, and magnetic permeability increased. The initial magnetic permeability was constant in the entire range of testing frequencies and the magnetic losses increased linearly. The stability of the magnetic characteristics in frequency is promising for developing further such types of magnetic composite.
PDF
