Context. It has been shown that convection in red supergiant stars (RSG) gives rise to large granules that cause surface inhomogeneities and shock waves in the photosphere. The resulting motion of ...the photocentre (on time scales ranging from months to years) could possibly have adverse effects on the parallax determination with Gaia. Aims. We explore the impact of the granulation on the photocentric and photometric variability. We quantify these effects in order to better characterise the error that could possibly alter the parallax. Methods. We use 3D radiative-hydrodynamics (RHD) simulations of convection with CO5BOLD and the post-processing radiative transfer code Optim3D to compute intensity maps and spectra in the Gaia G band 325-1030 nm. Results. We provide astrometric and photometric predictions from 3D simulations of RSGs that are used to evaluate the possible degradation of the astrometric parameters of evolved stars derived by Gaia. We show in particular from RHD simulations that a supergiant like Betelgeuse exhibits a photocentric noise characterised by a standard deviation of the order of 0.1 AU. The number of bright giant and supergiant stars whose Gaia parallaxes will be altered by the photocentric noise ranges from a few tens to several thousands, depending on the poorly known relation between the size of the convective cells and the atmospheric pressure scale height of supergiants, and to a lower extent, on the adopted prescription for galactic extinction. In the worst situation, the degradation of the astrometric fit caused by this photocentric noise will be noticeable up to about 5 kpc for the brightest supergiants. Moreover, parallaxes of Betelgeuse-like supergiants are affected by an error of the order of a few percents. We also show that the photocentric noise, as predicted by the 3D simulation, does account for a substantial part of the supplementary "cosmic noise" that affects Hipparcos measurements of Betelgeuse and Antares.
Context.Optical long-baseline interferometry is moving a crucial step forward with the advent of general-user scientific instruments that equip large aperture and hectometric baseline facilities, ...such as the Very Large Telescope Interferometer (VLTI). Aims.AMBER is one of the VLTI instruments that combines up to three beams with low, moderate and high spectral resolutions in order to provide milli-arcsecond spatial resolution for compact astrophysical sources in the near-infrared wavelength domain. Its main specifications are based on three key programs on young stellar objects, active galactic nuclei central regions, masses, and spectra of hot extra-solar planets. Methods.These key science goals led to scientific specifications, which were used to propose and then validate the instrument concept. AMBER uses single-mode fibers to filter the entrance signal and to reach highly accurate, multiaxial three-beam combination, yielding three baselines and a closure phase, three spectral dispersive elements, and specific self-calibration procedures. Results.The AMBER measurements yield spectrally dispersed calibrated visibilities, color-differential complex visibilities, and a closure phase allows astronomers to contemplate rudimentary imaging and highly accurate visibility and phase differential measurements. AMBER was installed in 2004 at the Paranal Observatory. We describe here the present implementation of the instrument in the configuration with which the astronomical community can access it. Conclusions.After two years of commissioning tests and preliminary observations, AMBER has produced its first refereed publications, allowing assessment of its scientific potential.
We study a sample of 16 bright and well-resolved late-type stars (10 O-rich giants, 2 red supergiants, and 4 C-rich giants) using the ESO VLTI/AMBER facility at medium resolution (R=1500) in the K ...band to detect and measure the deviation from centrosymmetry of their resolved surface brightness distribution. As indicator for departure from centrosymmetry, we use the centrosymmetry parameter (CSP). We observe that CSP increases along the asymptotic giant branch, reaching values as large as 30 degree . These large CSP values are likely attributable to a few large photospheric convective cells. Carbon stars like W Ori and R Scl, being close to the AGB tip, have the second largest CSP values (17. degree 6 and 22. degree 3, respectively), being only surpassed by the M5.5Ib/II supergiant T Cet (with CSP of 30. degree 4). For K and early M giants, CSP values are smaller, never exceeding 10 degree , with a clear tendency to increase with the atmospheric pressure scaleheight. This supports the hypothesis that the observed deviations from centrosymmetry are somehow related to convective cells, whose size depends upon the atmospheric pressure scaleheight.
Thanks to their large angular dimension and brightness, red giants and supergiants are privileged targets for optical long-baseline interferometers. 16 red giants and supergiants have been observed ...with the VLTI/AMBER facility over a 2-year period, at medium spectral resolution (
) in the K band. The limb-darkened angular diameters are derived from fits of stellar atmospheric models on the visibility and the triple product data. The angular diameters do not show any significant temporal variation, except for one target: TX Psc, which shows a variation of 4 per cent using visibility data. For the eight targets previously measured by long-baseline interferometry (LBI) in the same spectral range, the difference between our diameters and the literature values is less than 5 per cent, except for TX Psc, which shows a difference of 11 per cent. For the eight other targets, the present angular diameters are the first measured from LBI. Angular diameters are then used to determine several fundamental stellar parameters, and to locate these targets in the Hertzsprung-Russell diagram (HRD). Except for the enigmatic Tc-poor low-mass carbon star W Ori, the location of Tc-rich stars in the HRD matches remarkably well the thermally-pulsating asymptotic giant branch, as it is predicted by the stellar evolution models. For pulsating stars with periods available, we compute the pulsation constant and locate the stars along the various sequences in the period-luminosity diagram. We confirm the increase in mass along the pulsation sequences, as predicted by theory, except for W Ori which, despite being less massive, appears to have a longer period than T Cet along the first-overtone sequence.
Aims.In this paper, we present an innovative data reduction method for single-mode interferometry. It has been specifically developed for the AMBER instrument, the three-beam combiner of the Very ...Large Telescope Interferometer, but it can be derived for any single-mode interferometer. Methods.The algorithm is based on a direct modelling of the fringes in the detector plane. As such, it requires a preliminary calibration of the instrument in order to obtain the calibration matrix that builds the linear relationship between the interferogram and the interferometric observable, which is the complex visibility. Once the calibration procedure has been performed, the signal processing appears to be a classical least-square determination of a linear inverse problem. From the estimated complex visibility, we derive the squared visibility, the closure phase, and the spectral differential phase. Results.The data reduction procedures have been gathered into the so-called amdlib software, now available for the community, and are presented in this paper. Furthermore, each step in this original algorithm is illustrated and discussed from various on-sky observations conducted with the VLTI, with a focus on the control of the data quality and the effective execution of the data reduction procedures. We point out the present limited performances of the instrument due to VLTI instrumental vibrations which are difficult to calibrate.
Context. Because of the larger size of future telescopes, the star leakage effect due to the finite diameter of the stars will become a major problem for coronagraphs with very small inner working ...angles (IWA). Aims. To reduce this star leakage, we propose a new instrumental concept, the Achromatic Rotation-shearing Coronagraph (ARC), that provides a variable IWA that is easily tunable to ensure the observation of Solar-like systems with an extremely large telescope. Methods. The ARC belongs to the nuller class of coronagraphs. It takes advantage of the achromatic dark output of a Mach-Zehnder interferometer (MZI). Field rotators set in the arms of the MZI rotate the π-phase shifted images of the MZI by an angle ψ. An on-axis point source (the star) is nulled as twin-images of an off-axis point source (the planet) are formed. For ψ = π, the ARC is equivalent to the achromatic interfero-coronagraph. For small ψ, the twin images of the off-axis source are formed close to each another, and eventually nulled if too close. In this way, the ARC can get rid of star leakage while optimizing the transmission of the planet. We describe the compensation of polarization effects induced by field rotators. An application to diluted apertures is shortly presented. Results. We perform the mathematical analysis of the technique using Cartesian and polar coordinates, and assuming that the system is optically perfect. Analytic expressions are given for the leakage in both the focal and aperture planes. Simplified expressions for the contrast and signal-to-noise ratio (SNR) in the focal plane are given for a circular aperture, explicitly showing that the level of star leakage decreases as sin2(ψ/2), while the SNR increases as the inverse of sin(ψ/2). Conclusions. The ARC is appropriate for the detection of exoplanets and is not intended to provide images of the environment of stars.
We report on the testing of the centrosymmetry parameter (CSP), an indicator of deviation from centrosymmetry of a source brightness distribution. This indicator is derived from the spectral ...distribution of the triple product measured over three baselines of an optical interferometer. Numerical simulations using parametric toy-models (separated or transiting binary, one-spot model), generated with the spidast software, are applied to the VLTI /AMBER facility in the K band (2.2 μm). The simulations show that, in case of centrosymmetry, the CSP parameter is in agreement with the usual phase of the spectral mean of the triple product (called GCP, global closure phase). To justify the preferential use of CSP rather than GCP, we show situations with asymmetric geometries for which GCP diagnoses centrosymmetry, while CSP does not. Using realistic Roche lobe-filling binary and hydrodynamic convective models, we show that CSP can also be used as an indicator for geometric similarity between physical and toy-models. Thus, dealing with real data, the toy-model parameters can be fitted on the measured CSP values, in order to assess the input-parameter values of the most suitable complex physical model that will be used to interpret the data.
Aims. We present the first NIR spectro-interferometry of the LBV η Carinae. The observations were performed with the AMBER instrument of the ESO Very Large Telescope Interferometer (VLTI) using ...baselines from 42 to 89 m. The aim of this work is to study the wavelength dependence of η Car's optically thick wind region with a high spatial resolution of 5 mas (11 AU) and high spectral resolution. Methods. The observations were carried out with three 8.2 m Unit Telescopes in the K-band. The raw data are spectrally dispersed interferograms obtained with spectral resolutions of 1500 (MR-K mode) and 12 000 (HR-K mode). The MR-K observations were performed in the wavelength range around both the $\ion{He}{i}$ 2.059 μm and the Brγ 2.166 μm emission lines, the HR-K observations only in the Brγ line region. Results. The spectrally dispersed AMBER interferograms allow the investigation of the wavelength dependence of the visibility, differential phase, and closure phase of η Car. In the K-band continuum, a diameter of $4.0\pm0.2$ mas (Gaussian FWHM, fit range 28–89 m baseline length) was measured for η Car's optically thick wind region. If we fit Hillier et al. (2001, ApJ, 553, 837) model visibilities to the observed AMBER visibilities, we obtain 50% encircled-energy diameters of 4.2, 6.5 and 9.6 mas in the 2.17$\,\mu$m continuum, the $\ion{He}{i}$, and the Brγ emission lines, respectively. In the continuum near the Brγ line, an elongation along a position angle of $120\degr\pm15\degr$ was found, consistent with previous VINCI/VLTI measurements by van Boekel et al. (2003, A&A, 410, L37). We compare the measured visibilities with predictions of the radiative transfer model of Hillier et al. (2001), finding good agreement. Furthermore, we discuss the detectability of the hypothetical hot binary companion. For the interpretation of the non-zero differential and closure phases measured within the Brγ line, we present a simple geometric model of an inclined, latitude-dependent wind zone. Our observations support theoretical models of anisotropic winds from fast-rotating, luminous hot stars with enhanced high-velocity mass loss near the polar regions.
The young stellar object MWC 297 is an embedded B1.5Ve star exhibiting strong hydrogen emission lines and a strong near-infrared continuum excess. This object has been observed with the VLT ...interferometer equipped with the AMBER instrument during its first commissioning run. AMBER/VLTI is currently the only near infrared interferometer that can observe spectrally dispersed visibilities. MWC 297 has been spatially resolved in the continuum with a visibility of $0.50^{+0.08}_{-0.10}$ as well as in the Brγ emission line where the visibility decreases to $0.33\pm0.06$. This change in the visibility with wavelength can be interpreted by the presence of an optically thick disk responsible for the visibility in the continuum and of a stellar wind traced by the Brγ emission line and whose apparent size is 40% larger. We validate this interpretation by building a model of the stellar environment that combines a geometrically thin, optically thick accretion disk model consisting of gas and dust, and a latitude-dependent stellar wind outflowing above the disk surface. The continuum emission and visibilities obtained from this model are fully consistent with the interferometric AMBER data. They agree also with existing optical, near-infrared spectra and other broad-band near-infrared interferometric visibilities. We also reproduce the shape of the visibilities in the Brγ line as well as the profile of this line obtained at an higher spectral resolution with the VLT/ISAAC spectrograph, and those of the Hα and Hβ lines. The disk and wind models yield a consistent inclination of the system of approximately 20°. A picture emerges in which MWC 297 is surrounded by an equatorial flat disk that is possibly still accreting and an outflowing wind that has a much higher velocity in the polar region than at the equator. The AMBER/VLTI unique capability of measuring spectral visibilities therefore allows us for the first time to compare the apparent geometry of a wind with the disk structure in a young stellar system.
Extracting stellar fundamental parameters from Spectrointerferometric (SPI) data requires reliable estimates of observables and with robust uncertainties (visibility, triple product, phase closure). ...A number of fine calibration procedures are necessary throughout the reduction process. Testing departures from centrosymmetry of brightness distributions is a useful complement. Developing a set of automatic routines called spidast (made available to the community) to reduce, calibrate and interpret raw data sets of instantaneous spectrointerferograms at the spectral channel level, we complement (and in some respects improve) the ones contained in the amdlib Data Reduction Software. Our new software spidast is designed to work in an automatic mode, free from subjective choices, while being versatile enough to suit various processing strategies. spidast performs the following automated operations: weighting of non-aberrant SPI data (visibility, triple product), fine spectral calibration (subpixel level), accurate and robust determinations of stellar diameters for calibrator sources (and their uncertainties as well), correction for the degradations of the interferometer response in visibility and triple product, calculation of the centrosymmetry parameter from the calibrated triple product, fit of parametric chromatic models on SPI observables, to extract model parameters. spidast is currently applied to the scientific study of 18 cool giant and supergiant stars, observed with the VLTI/AMBER facility at medium resolution in the K band. Because part of their calibrators have no diameter in the current catalogues, spidast provides new determinations of the angular diameters of all calibrators. Comparison of spidast final calibrated observables with amdlib determinations shows good agreement, under good and poor seeing conditions.
PDF
