Abstract
A first beam dynamics and RF design of an Alvarez-type drift tube linac (DTL) has been defined in the framework of the EU project, HITRIplus. It is meant primarily as a carbon (
12
C
4+
) ...and helium (
4
He
2+
) ion injector of a compact synchrotron for patient treatment. As a second implementation, helium particle acceleration with a higher duty cycle (10%) enables radioisotope production. The 352.2 MHz structure efficiently accelerates ion species with A/q=3 and 2, in the energy range from 1 to 5 MeV/u and for a beam current up to ∼0.5 mA. The design extends to a full length of ∼6.4 meters. Permanent magnet quadrupoles are utilized all along the DTL for focusing both ion beams. This paper presents a first-phase analysis towards a realistic DTL design capable of providing full beam transmission and minimum overall emittance increase for both A/q values.
Abstract
The application of muon tomography method in small scale, for the imaging of a five-centimeter side lead cube, is being examined in the present work. The representation of the object is ...being achieved by using the transmission muography technique, in which the “free-sky” muon flux is compared to the muon flux measured within the acceptance of the detector. This comparison yields information about the absorption of the muons as they pass through the object under investigation. Also, a projective reconstruction method called “Back Projection” is tested by being applied on the data, providing information about the location of the object and its dimensions. This project has been carried out within the frame of EKATY programme, which aims to the innovative imaging of the subsurface of archaeological sites and the interior of structural elements of monuments in three and four dimensions.
Abstract
Within the frame of the EKATϒ programme, whose purpose is the innovative imaging of the subsurface of archaeological sites and the interior of structural elements of monuments in “three” and ...“four” dimensions, the applicability of Muon Tomography technique in the representation of a tumulus is tested in the present work. The scanning of its internal structure is accomplished by measuring the flux deficit of cosmic muon tracks in the presence of an object inside the tumulus, compared to the muon flux when traversing a uniform tumulus (transmission muography). The feasibility study of the method is achieved with a simulation of the tumulus geometry and the structure under investigation. Following the simulation process, a tracking telescope, consisting of four MicroMegas detectors and two trigger plastic scintillators, will be placed near Apollonia’s tumulus to collect data. For the specific latitude where the Apollonia’s tumulus is located, the energy and angular muon distribution at sea level is studied. Implementing the dimensions of the telescope in the simulation, the back-projection method is examined for the localization of the hidden object and the estimation of its dimensions. The method is tested for the telescope optimal position, placed under the tumulus, and the realistic one, placed near the tumulus at the level of its base.
Timing performance of a Micro-Channel-Plate Photomultiplier Tube Bortfeldt, J.; Brunbauer, F.; David, C. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
04/2020, Volume:
960, Issue:
C
Journal Article
Peer reviewed
Open access
The spatial dependence of the timing performance of the R3809U-50 Micro-Channel-Plate PMT (MCP-PMT) by Hamamatsu was studied in high energy muon beams. Particle position information is provided by a ...GEM tracker telescope, while timing is measured relative to a second MCP-PMT, identical in construction. In the inner part of the circular active area (radius r<5.5 mm) the time resolution of the two MCP-PMTs combined is better than 10 ps. The signal amplitude decreases in the outer region due to less light reaching the photocathode, resulting in a worse time resolution. The observed radial dependence is in quantitative agreement with a dedicated simulation. With this characterization, the suitability of MCP-PMTs as t0 reference detectors has been validated.
Timing performance of a multi-pad PICOSEC-Micromegas detector prototype Aune, S.; Bortfeldt, J.; Brunbauer, F. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
03/2021, Volume:
993, Issue:
C
Journal Article
Peer reviewed
Open access
The multi-pad PICOSEC-Micromegas is an improved detector prototype with a segmented anode, consisting of 19 hexagonal pads. Detailed studies are performed with data collected in a muon beam over four ...representative pads. We demonstrate that such a device, scalable to a larger area, provides excellent time resolution and detection efficiency. As expected from earlier single-cell device studies, we measure a time resolution of approximately 25 picoseconds for charged particles hitting near the anode pad centres, and up to 30 picoseconds at the pad edges. Here, we study in detail the effect of drift gap thickness non-uniformity on the timing performance and evaluate impact position based corrections to obtain a uniform timing response over the full detector coverage.
The PICOSEC Micromegas detector can time the arrival of Minimum Ionizing Particles with a sub-25 ps precision. A very good timing resolution in detecting single photons is also demonstrated in laser ...beams. The PICOSEC timing resolution is determined mainly by the drift field. The arrival time of the signal and the timing resolution vary with the size of the pulse amplitude.
Detailed simulations based on GARFIELD++ reproduce the experimental PICOSEC timing characteristics. This agreement is exploited to identify the microscopic physical variables, which determine the observed timing properties. In these studies, several counter-intuitive observations are made for the behavior of such microscopic variables. In order to gain insight on the main physical mechanisms causing the observed behavior, a phenomenological model is constructed and presented. The model is based on a simple mechanism of “time-gain per interaction” and it employs a statistical description of the avalanche evolution. It describes quantitatively the dynamical and statistical properties of the microscopic quantities, which determine the PICOSEC timing characteristics, in excellent agreement with the simulations. In parallel, it offers phenomenological explanations for the behavior of these microscopic variables. The formulae expressing this model can be used as a tool for fast and reliable predictions, provided that the input parameter values (e.g. drift velocities) are known for the considered operating conditions.
This contribution describes the PICOSEC-Micromegas detector which achieves a time resolution below 25ps. In this device the passage of a charged particle produces Cherenkov photons in a radiator, ...which then generate electrons in a photocathode and these photoelectrons enter a two-stage Micromegas with a reduced drift region and a typical anode region. The results from single-channel prototypes (demonstrating a time resolution of 24ps for minimum ionizing particles, and 76ps for single photoelectrons), the understanding of the detector in terms of detailed simulations and a phenomenological model, the issues of robustness and how they are tackled, and preliminary results from a multi-channel prototype are presented (demonstrating that a timing resolution similar to that of the single-channel device is feasible for all points across the area covered by a multi-channel device).
PDF
