Laser-driven particle acceleration, obtained by irradiation of a solid target using an ultra-intense (I > 10
W/cm
) short-pulse (duration <1 ps) laser, is a growing field of interest, in particular ...for its manifold potential applications in different domains. Here, we provide experimental evidence that laser-generated particles, in particular protons, can be used for stress testing materials and are particularly suited for identifying materials to be used in harsh conditions. We show that these laser-generated protons can produce, in a very short time scale, a strong mechanical and thermal damage, that, given the short irradiation time, does not allow for recovery of the material. We confirm this by analyzing changes in the mechanical, optical, electrical, and morphological properties of five materials of interest to be used in harsh conditions.
Proton transmission imaging has been proposed and investigated as imaging modality complementary to x-ray based techniques in proton beam therapy. In particular, it addresses the issue of range ...uncertainties due to the conversion of an x-ray patient computed tomography (CT) image expressed in Hounsfield Units (HU) to relative stopping power (RSP) needed as input to the treatment planning system. One approach to exploit a single proton radiographic projection is to perform a patient-specific calibration of the CT to RSP conversion curve by optimising the match between a measured and a numerically integrated proton radiography. In this work, we develop the mathematical tools needed to perform such an optimisation in an efficient and robust way. Our main focus lies on set-ups which combine pencil beam scanning with a range telescope detector, although most of our methods can be employed in combination with other set-ups as well. Proton radiographies are simulated in Monte Carlo using an idealised detector and applying the same data processing chain used with experimental data. This approach allows us to have a ground truth CT-RSP curve to compare the optimisation results with. Our results show that the parameters of the CT-RSP curve are strongly correlated when using a pencil beam based set-up, which leads to unrealistic variation in the optimised CT-RSP curves. To address this issue, we introduce a regularisation procedure which guarantees a plausible degree of smoothness in the optimised CT-RSP curves. We investigate three different methods to perform the numerical projection operation needed to generate a proton digitally reconstructed radiography. We find that the approximate and computationally faster method performs as well as the more accurate but more demanding method. We perform a Monte Carlo experiment based on a head and neck patient to evaluate the range accuracy achievable with the optimised CT-RSP curves and find an agreement with the ground truth expectation of better than Formula: see text. Our results further indicate that the region in the patient in which the proton radiography is acquired does not necessarily have to correspond to the treatment volume to achieve this accuracy. This is important as the imaged region could be freely chosen, e.g. in order to spare organs at risk.
In the field of radiotherapy, Monte Carlo (MC) particle transport calculations are recognized for their superior accuracy in predicting dose and fluence distributions in patient geometries compared ...to analytical algorithms which are generally used for treatment planning due to their shorter execution times. In this work, a newly developed MC-based treatment planning (MCTP) tool for proton therapy is proposed to support treatment planning studies and research applications. It allows for single-field and simultaneous multiple-field optimization in realistic treatment scenarios and is based on the MC code FLUKA. Relative biological effectiveness (RBE)-weighted dose is optimized either with the common approach using a constant RBE of 1.1 or using a variable RBE according to radiobiological input tables. A validated reimplementation of the local effect model was used in this work to generate radiobiological input tables. Examples of treatment plans in water phantoms and in patient-CT geometries together with an experimental dosimetric validation of the plans are presented for clinical treatment parameters as used at the Italian National Center for Oncological Hadron Therapy. To conclude, a versatile MCTP tool for proton therapy was developed and validated for realistic patient treatment scenarios against dosimetric measurements and commercial analytical TP calculations. It is aimed to be used in future for research and to support treatment planning at state-of-the-art ion beam therapy facilities.
Ion beam therapy is a rapidly growing technique for tumor radiation therapy. Ions allow for a high dose deposition in the tumor region, while sparing the surrounding healthy tissue. For this reason, ...the highest possible accuracy in the calculation of dose and its spatial distribution is required in treatment planning. On one hand, commonly used treatment planning software solutions adopt a simplified beam-body interaction model by remapping pre-calculated dose distributions into a 3D water-equivalent representation of the patient morphology. On the other hand, Monte Carlo (MC) simulations, which explicitly take into account all the details in the interaction of particles with human tissues, are considered to be the most reliable tool to address the complexity of mixed field irradiation in a heterogeneous environment. However, full MC calculations are not routinely used in clinical practice because they typically demand substantial computational resources. Therefore MC simulations are usually only used to check treatment plans for a restricted number of difficult cases. The advent of general-purpose programming GPU cards prompted the development of trimmed-down MC-based dose engines which can significantly reduce the time needed to recalculate a treatment plan with respect to standard MC codes in CPU hardware. In this work, we report on the development of fred, a new MC simulation platform for treatment planning in ion beam therapy. The code can transport particles through a 3D voxel grid using a class II MC algorithm. Both primary and secondary particles are tracked and their energy deposition is scored along the trajectory. Effective models for particle-medium interaction have been implemented, balancing accuracy in dose deposition with computational cost. Currently, the most refined module is the transport of proton beams in water: single pencil beam dose-depth distributions obtained with fred agree with those produced by standard MC codes within 1-2% of the Bragg peak in the therapeutic energy range. A comparison with measurements taken at the CNAO treatment center shows that the lateral dose tails are reproduced within 2% in the field size factor test up to 20 cm. The tracing kernel can run on GPU hardware, achieving 10 million primary Formula: see text on a single card. This performance allows one to recalculate a proton treatment plan at 1% of the total particles in just a few minutes.
•A novel VGMS made up of recycled/natural and highly performing materials from the energy/environmental point of view, has been designed, prototyped and in lab/in field monitored through a ...multidisciplinary approach.•The technological issues, biometric parameters, and the acoustic, thermal and mechanical aspects were complimentarily investigated.•Thermal performance analyses showed interesting effect both during heating and cooling seasons.•An acoustic analysis demonstrated that the system acts well as a sound insulation system, and its high sound absorption could be exploited to reduce the urban canyoning effect.
Vegetation in architecture can be considered a proper design strategy that is aimed at improving not only the performances of buildings, but also the outdoor climate. Different technological solutions have been proposed over the years to cover buildings with vegetation, i.e. green roofs, green walls and green balconies. A particular typology of green wall, which has recently been gaining high consensus among designers, is the vertical greenery modular system (VGMS). The positive impact of this type of technology on the performance of buildings is related to several factors, such as the façade orientation, the use of the building, climatic conditions, the type of plants, the substrates and wall assemblies, as well as mechanical and technological issues. A multidisciplinary approach is therefore needed, and different skills have to be joined together right from the early design phase in order to optimize and balance all the aspects that are involved. In this framework, a research project has been carried out in Turin (North West Italy), with the aim of developing a novel VGMS, constituted by a modular box covered with vegetation, made up of recycled/natural and highly performing materials from the energy/environmental point of view. After the design phase, the actual performance of the VGMS was assessed, through laboratory and long-term in field monitoring, and at the same time, the technological issues, biometric parameters, and the acoustic, thermal and mechanical aspects were investigated.
In this paper we discuss the magnetic field self generation, via the so-called Biermann battery effect, and its diffusion for a blast wave (BW) expanding in a perturbed background medium. A series of ...simulations verify the bi-linear behavior of the Biermann battery source term both in amplitude and in wavenumber. Such a behavior is valid in the limit of no diffusivity. When diffusivity is also considered, we observe an inverse proportionality with the wavenumber: for large wavenumber perturbation magnetic diffusivity plays a key role. Writing the induction equation in a dimensionless form we discuss how, in terms of magnetic properties, the BW can be subdivided into three main regions: the remnant where the frozen-in-flow approximation holds, the thin shell where the magnetic field is in fact generated but at the same time begins to diffuse, and the shock front where the magnetic field diffuses away. A possible experimental scenario that could induce magnetic fields of about 100 gauss is finally investigated. Simulations have been performed with the code DUED.
In inertial fusion shock ignition, separation of the stages of fuel compression and hot spot creation introduces some degree of design flexibility. A lower implosion velocity can be compensated for ...by a more intense ignition pulse. Flexibility increases with target (and driver) size and allows for a compromise between energy gain and risk reduction. Having designed a reference ignition target, we have developed an analytical model for (up)-scaling targets as a function of laser energy, while keeping under control parameters related to hydro- and plasma instabilities. Detailed one-dimensional simulations confirm the model and generate gain curves. Options for increasing target robustness are also discussed. The previous results apply to UV laser light (with wavelength λ = 0.35 μm). We also show that our scaling model can be used in the design of targets driven by green laser light (λ = 0.53 μm).
. The Monte Carlo simulation software is a valuable tool in radiation therapy, in particular to achieve the needed accuracy in the dose evaluation for the treatment plans optimisation. The current ...challenge in this field is the time reduction to open the way to many clinical applications for which the computational time is an issue. In this manuscript we present an innovative GPU-accelerated Monte Carlo software for dose valuation in electron and photon based radiotherapy, developed as an update of the FRED (Fast paRticle thErapy Dose evaluator) software.
. The code transports particles through a 3D voxel grid, while scoring their energy deposition along their trajectory. The models of electromagnetic interactions in the energy region between 1 MeV-1 GeV available in literature have been implemented to efficiently run on GPUs, allowing to combine a fast tracking while keeping high accuracy in dose assessment. The FRED software has been bench-marked against state-of-art full MC (FLUKA, GEANT4) in the realm of two different radiotherapy applications: Intra-Operative Radio Therapy and Very High Electron Energy radiotherapy applications.
. The single pencil beam dose-depth profiles in water as well as the dose map computed on non-homogeneous phantom agree with full-MCs at 2% level, observing a gain in processing time from 200 to 5000.
. Such performance allows for computing a plan with electron beams in few minutes with an accuracy of ∼%, demonstrating the FRED potential to be adopted for fast plan re-calculation in photon or electron radiotherapy applications.
PDF
