This paper presents results about the characterisation of the biomass fly ashes sourced from a thermal power plant and from a co-generation power plant located in Portugal, and the study of new ...cement formulations incorporated with the biomass fly ashes. The study includes a comparative analysis of the phase formation, setting and mechanical behaviour of the new cement–fly ash formulations based on these biomass fly ashes. Techniques such as X-ray diffraction (XRD), X-ray fluorescence spectroscopy (XRF), thermal gravimetric and differential thermal analysis (TG/DTA), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and environmental scanning electron spectroscopy (ESEM) were used to determine the structure and composition of the formulations. Fly ash F1 from the thermal power plant contained levels of SiO
2, Al
2O
3 and Fe
2O
3 indicating the possibility of exhibiting pozzolanic properties. Fly ash F2 from the co-generation plant contained a higher quantity of CaO (∼25%). The fly ashes are similar to class C fly ashes according to EN 450 on the basis of chemical composition. The hydration rate and phase formation are greatly dependant on the samples’ alkali content and water to binder (
w/
b) ratio. In cement based mortar with 10% fly ash the basic strength was maintained, however, when 20% fly ash was added the mechanical strength was around 75% of the reference cement mortar. The fly ashes contained significant levels of chloride and sulphate and it is suggested that the performance of fly ash–cement binders could be improved by the removal or control of these chemical species.
•Physical–chemical characterization of bottom and fly ashes from biomass combustion.•PCDD/F and PAH were found in concerning concentrations in biomass fly ashes.•ANC and pH-dependent leaching dataset ...of heavy metals and nutrients was evaluated.•Leaching of heavy metals was characterized by high mobility at low pH values.
Bottom and fly ashes streams collected along a year in several biomass thermal plants were studied. The bulk composition of ashes and other chemical characteristics that may impact soil application showed a high variability depending on the ash stream, combustion technology and ash management practice at the power plants. The acid neutralization capacity (ANC) and metal’s availability for leaching at fixed pH 7 and 4 was performed according with EA NEN 7371, as a quick evaluation method to provide information on the long-term behavior of ashes, regarding heavy metals and also plant nutrients release. Also the pH dependence leachability study was performed according to CEN/TS 14429 for predicting the leaching behavior under different scenarios. Leachability profiles were established between pH 3 and 12, allowing to distinguish different solubility control phenomena of toxic heavy metals (Cu, Cr, Mn, Ni, Zn, Pb) as well as other salts (Ca, K, Mg, Na, Cl). The ANC of fly ashes at pH 4 (3.6–9.6molH+/kg) were higher than that observed for the bottom ashes (1.2–2.1molH+/kg). Ashes were also characterized for persistent organic pollutants (POP), such as polycyclic aromatic hydrocarbons (PAH) and paradibenzodioxines and furanes (PCDD/F). Contents were found to be much higher in fly ash than in bottom ash streams. None of the PAH levels did reach the current national limit value of sewage sludge application in soils or the guide value for ash in north European countries. However, PCDD/F contents, which are not regulated, varied from non-detectable levels to high amounts, regardless the level of loss on ignition (LOI) or unburned carbon content in fly ashes. Given the current ash management practices and possible use of blends of bottom and fly ash streams as soil conditioners resembles clear the urgent need to regulate ash utilization in soils, incorporating limit values both for heavy metals, PAH and PCDD/F.
An experimental study was conducted at field conditions in order to evaluate the effect of application of ash from biomass combustion on some soil fertility characteristics and plant growth. ...Application of 7.5 Mg ha
−1
industrial fly ash (IA), domestic ash (DA), and a 50:50 mix of domestic ash (DA) and spent coffee grounds (SCG) was made in different soil parcels.
Lolium perenne
seeds were sown and the grown biomass was harvested and quantified after 60 days. Soil samples from each parcel were also collected after that period and characterized. Both soil and grown biomass samples were analyzed for Ca, Mg, Na, K, P, Fe, Mn, Zn, and Al contents. Soil pH was determined before and after amendment. All applications rose significantly soil pH. Domestic ash, whether combined with coffee grounds or not, proved to be efficient at supplying available macronutrients Ca, Mg, K, and P to the soil and also reducing availability of Al (more than industrial ash). However, it inhibited plant growth, even more when combined with spent coffee grounds. As regards to elemental abundance in plant tissue, both domestic ash treatments reduced Ca and enhanced Al contents, unlike industrial ash, which proved less harmful for the load applied in the soil. Hence, it was possible to conclude that application load should be a limiting factor for this management option for the studied materials.
The use of charcoal for cooking and heating can be a major source of air pollution and lead to a wide range of health outcomes. The aim of this study was to experimentally quantify and characterise ...the gaseous and particulate matter (PM2.5) emissions from charcoal combustion in a typical brick barbecue grill. The gaseous emission factors were 219 ± 44.8 g kg−1 for carbon monoxide (CO), 3.01 ± 0.698 g kg−1 for nitrogen oxides (NOx expressed as NO2), and 4.33 ± 1.53 gC kg−1 for total organic carbon (TOC). Particle emissions (7.38 ± 0.353 g kg−1 of dry charcoal burned) were of the same order of magnitude as those from traditional residential wood burning appliances. About 50% of the PM2.5 emitted had a carbonaceous nature while water soluble ions accounted, on average, for 17% of the particulate mass. Alkanes (C11–C16 and C23), hopanes, steranes and alkyl-PAHs accounted for small mass fractions of PM2.5. Phenolic compounds and saccharides represented the major particle-bond organic constituents. The high proportion of either resin acids or syringyl and vanillyl compounds is consistent with emissions from charred coniferous wood. The ratios between anhydrosugars for charcoal are much lower than the values reported for lignite combustion, but overlap those from other biomass burning sources.
•Speciation of PM2.5 in flue gas from charcoal combustion was obtained.•The carbonaceous content represented almost 50% of PM2.5 mass.•Potassium, sodium and chloride were the dominant water soluble ions in PM2.5.•Anhydrosugars constituted the dominant organic class in PM2.5.•Retene represented >50% of PAHs global mass in PM2.5.
The present work explores the preparation of fayalite α‐Fe2SiO4, the iron‐rich end‐member of the olivine solid‐solution series, as a tar removal catalyst for biomass gasification. The synthetic ...procedure was developed starting from the stoichiometric mixture of hematite and micrometer size silicon carbide and employing thermal treatments in controlled atmospheres at 1000‐1100°C supported by thermodynamic modeling to assess the required redox conditions. The treatments in dry and humidified inert gas yielded phase mixtures containing metallic Fe as one of the main phases, thus emphasizing a shortage of oxygen supply. XRD and TGA studies of precursor mixtures on heating in dry CO2 demonstrated a multistep mechanism of the overall reaction including (a) fast reactivity between silicon carbide and hematite at ~920°C with formation of metallic Fe and amorphous silica followed by (b) formation of fayalite involving oxygen supplied in the form of CO2 and competing with (c) over‐oxidation to thermodynamically favorable Fe3O4+SiO2 mixture. Comparative studies of reactivity in powdered and pelletized samples emphasized the importance of the kinetic factor in the formation of Fe2SiO4 while preventing further oxidation. The preferential formation of fayalite in the CO2 atmosphere is shown to be favored by shorter treatments of compacted samples at higher temperatures. The procedure was designed (2‐step heating to 1100°C in CO2 followed by fast cooling) for the preparation of pelletized fayalite α‐Fe2SiO4 catalyst with only minor traces of surface over‐oxidation which can be suppressed by adding 10 vol.% of forming gas to CO2 flow.
Forestry management operations that are designed to prevent wildfires while also protecting the environmental compartments that are directly affected by them, such as soil, are of major relevance. ...The valorization of residual forestry biomass into biochar that is then used to be turned back into forest soils is an approach that meets Circular Economy principles. However, the effects on soil of the application of biochar that is produced from low-grade forestry biomass are unknown. In this work, a soil incubation assay was performed with a sandy soil that was amended with biochar produced from residual forestry biomass (Acacia) to assess its effectiveness in terms of boosting soil quality. The factorial study comprised the effects of biochar at two pyrolysis temperatures (450 °C and 550 °C), four application rates (0%, 3%, 6%, and 10% (w/w)), and three particle size classes (S < 0.5 mm, M = 0.5; 3.15, and L > 3.15 mm). The soil pH increased for all treatments to suitable agronomic values (5–7), and the water-holding capacity increased by 69% to 325% when compared to the control soil. The bioavailability of the plant nutrient elements also increased with the application rate, especially for treatments with small particles of biochar. Biochar that is made of low-grade biomass from forestry maintenance operations can be efficiently recycled back into forest soils to improve the physicochemical properties of agronomic relevance, thus allowing for a reduced water demand and better soil quality. However, studies on biochar applications in different soils are needed in order to assess the effectiveness of this approach.
Biomass gasification is a relevant option to produce a gaseous fuel, it faces, however, several barriers regarding its quality for energetic applications. Therefore, in this study, air-steam and ...O2-enriched air mixtures were used as gasification agents during the gasification of residual biomass from eucalyptus to improve the producer gas quality. The steam addition promoted an increase in CO2 and H2 concentrations, whilst decreasing the CO and CH4 concentrations. The steam addition had no evident impact on the lower heating value of the dry producer gas and a positive effect on gas yield and the H2:CO molar ratio, attaining the later values up to 1.6 molH2∙mol−1CO. The increase in O2 concentration in the gasification agent (φ) promoted an increase in all combustible species and CO2 concentrations. The lower heating value of the dry producer gas underwent an increase of 57%, reaching a value of 7.5 MJ∙Nm−3dry gas, when the φ increased from 20 to 40 %vol.O2, dry GA. The gas yield had a significant decrease (33%) with φ increase. This work showed that the addition of steam or O2 during air gasification of residual biomass improved producer gas quality, overcoming some of the barriers found in conventional air gasification technology.
Biochars have been shown as promising materials for cadmium remediation. However, the different precursors and the pyrolysis process operating conditions can yield very different surface functional ...groups, and as a result, different cadmium sorption mechanisms can be observed in biochars. Herein we present the results of cadmium sorption on biochars produced from the pyrolysis of different agro-residues, namely, coffee husk, quinoa straw, and oil palm kernel shell. The adsorption isotherms were used to determine the influence of the biochar’s physicochemical characteristics to their sorption behavior. The biochars prepared from quinoa residues showed much higher cadmium uptakes than the other biochars. The concentration of base cations was found to be a critical factor for cadmium sorption. Although the quinoa biochars presented large uptakes, it was found that base cations were supported on the biochars and could be removed by leaching. Results from this study suggest that concentration of base cations on biochars could be used as predictors of the biochar capabilities for the removal of cadmium in aqueous solution.
This study investigates the potential of utilizing pyrolysis byproducts, including char and non-condensable gases, as an energy source to promote autothermal pyrolysis. A total of six pyrolysis ...experiments were conducted at three distinct cracking temperatures, namely, 450 °C, 500 °C, and 550 °C. The experiments utilized two types of biomasses, i.e., 100% pine chips and 75% pine chips mixed with 25% refuse-derived fuels (RDF). The findings from the experiments were subsequently incorporated into a process simulation conducted on Aspen Plus for an energy balance and a techno-economic analysis. The results of the experiments revealed that the energy produced by the byproducts utilizing only pine chips is 1.453 kW/kg, which is enough to fulfill the energy demand of the pyrolysis reactor (1.298 kW/kg). However, when 25% of RDF is added, the energy demand of the reactor decreases to 1.220 kW/kg, and the produced energy increases to 1.750 kW/kg. Furthermore, adding RDF increases bio-oil’s lower heating value (LHV). The techno-economic study proposed three scenarios: optimistic, conservative, and tragic. The optimistic has a payback period (PBP) of 7.5 years and a positive net present value (NPV). However, the other two scenarios were unfavorable, resulting in unfeasibility.
Combustion of residual forest biomass (RFB) derived from eucalypt (
Eucalyptus globulus
), pine (
Pinus pinaster
) and golden wattle (
Acacia longifolia
) was evaluated in a pilot-scale bubbling ...fluidised bed reactor (BFBR). During the combustion experiments, monitoring of temperature, pressure and exhaust gas composition has been made. Ash samples were collected at several locations along the furnace and flue gas treatment devices (cyclone and bag filter) after each combustion experiment and were analysed for their unburnt carbon content and chemical composition. Total suspended particles (TSP) in the combustion flue gas were evaluated at the inlet and outlet of cyclone and baghouse filter and further analysed for organic and elemental carbon, carbonates and 57 chemical elements. High particulate matter collection efficiencies in the range of 94–99% were observed for the baghouse, while removal rates of only 1.4–17% were registered for the cyclone. Due to the sand bed, Si was the major element in bottom ashes. Fly ashes, in particular those from eucalypt combustion, were especially rich in CaO, followed by relevant amounts of SiO
2
, MgO and K
2
O. Ash characteristics varied among experiments, showing that their inorganic composition strongly depends on both the biomass composition and combustion conditions. Inorganic constituents accounted for TSP mass fractions up to 40 wt%. Elemental carbon, organic matter and carbonates contributed to TSP mass fractions in the ranges 0.58–44%, 0.79–78% and 0.01–1.7%, respectively.
PDF
