The increasing demand for replacing conventional fossil fuels with clean energy or economical and sustainable energy storage drives better battery research today. Sodium‐ion batteries (SIBs) are ...considered as a promising alternative for grid‐scale storage applications due to their similar “rocking‐chair” sodium storage mechanism to lithium‐ion batteries, the natural abundance, and the low cost of Na resources. Searching for appropriate electrode materials with acceptable electrochemical performance is the key point for development of SIBs. Layered transition metal oxides represent one of the most fascinating electrode materials owing to their superior specific capacity, environmental benignity, and facile synthesis. However, three major challenges (irreversible phase transition, storage instability, and insufficient battery performance) are known for cathodes in SIBs. Herein, a comprehensive review on the latest advances and progresses in the exploration of layered oxides for SIBs is presented, and a detailed and deep understanding of the relationship of phase transition, air stability, and electrochemical performance in layered oxide cathodes is provided in terms of refining the structure–function–property relationship to design improved battery materials. Layered oxides will be a competitive and attractive choice as cathodes for SIBs in next‐generation energy storage devices.
The recent progress in layered oxide cathodes for sodium‐ion batteries is comprehensively reviewed. Some new perspectives concentrating on phase transition, air stability, and electrochemical performance in layered cathodes are provided, in terms of refining the structure–function–property relationship to rationally design better electrode materials.
Single‐crystalline cathode materials have attracted intensive interest in offering greater capacity retention than their polycrystalline counterparts by reducing material surfaces and phase ...boundaries. However, the single‐crystalline LiCoO2 suffers severe structural instability and capacity fading when charged to high voltages (4.6 V) due to Co element dissolution and O loss, crack formation, and subsequent electrolyte penetration. Herein, by forming a robust cathode electrolyte interphase (CEI) in an all‐fluorinated electrolyte, reversible planar gliding along the (003) plane in a single‐crystalline LiCoO2 cathode is protected due to the prevention of element dissolution and electrolyte penetration. The robust CEI effectively controls the performance fading issue of the single‐crystalline cathode at a high operating voltage of 4.6 V, providing new insights for improved electrolyte design of high‐energy‐density battery cathode materials.
Single‐crystalline cathode materials have attracted intensive interest. However, the single‐crystalline LiCoO2 suffers severe structural instability and capacity fading when charged to high voltages (4.6 V vs Li/Li+) due to Co and O element dissolution, crack formation, and electrolyte penetration. In this work, the above problems are inhibited by forming a robust cathode electrolyte interphase (CEI) on the surface of LiCoO2.
Metallic lithium is the most competitive anode material for next‐generation lithium (Li)‐ion batteries. However, one of its major issues is Li dendrite growth and detachment, which not only causes ...safety issues, but also continuously consumes electrolyte and Li, leading to low coulombic efficiency (CE) and short cycle life for Li metal batteries. Herein, the Li dendrite growth of metallic lithium anode is suppressed by forming a lithium fluoride (LiF)‐enriched solid electrolyte interphase (SEI) through the lithiation of surface‐fluorinated mesocarbon microbeads (MCMB‐F) anodes. The robust LiF‐enriched SEI with high interfacial energy to Li metal effectively promotes planar growth of Li metal on the Li surface and meanwhile prevents its vertical penetration into the LiF‐enriched SEI from forming Li dendrites. At a discharge capacity of 1.2 mAh cm−2, a high CE of >99.2% for Li plating/stripping in FEC‐based electrolyte is achieved within 25 cycles. Coupling the pre‐lithiated MCMB‐F (Li@MCMB‐F) anode with a commercial LiFePO4 cathode at the positive/negative (P/N) capacity ratio of 1:1, the LiFePO4//Li@MCMB‐F cells can be charged/discharged at a high areal capacity of 2.4 mAh cm−2 for 110 times at a negligible capacity decay of 0.01% per cycle.
A dendrite‐free lithium (Li) metal anode for Li metal batteries (LMBs) is realized by using surface‐fluorinated mesocarbon microbeads (MCMB‐F) as substrate. During the lithiation process, the fluorinated graphite on the outermost surface of MCMB‐F is reduced in situ to form a robust lithium‐fluoride‐enriched solid electrolyte interphase, providing an efficient avenue for LMBs with high Li metal coulombic efficiency and no Li dendrite growth.
P2‐type layered oxides suffer from an ordered Na+/vacancy arrangement and P2→O2/OP4 phase transitions, leading them to exhibit multiple voltage plateaus upon Na+ extraction/insertion. The deficient ...sodium in the P2‐type cathode easily induces the bad structural stability at deep desodiation states and limited reversible capacity during Na+ de/insertion. These drawbacks cause poor rate capability and fast capacity decay in most P2‐type layered oxides. To address these challenges, a novel high sodium content (0.85) and plateau‐free P2‐type cathode‐Na0.85Li0.12Ni0.22Mn0.66O2 (P2‐NLNMO) was developed. The complete solid‐solution reaction over a wide voltage range ensures both fast Na+ mobility (10−11 to 10−10 cm2 s−1) and small volume variation (1.7 %). The high sodium content P2‐NLNMO exhibits a higher reversible capacity of 123.4 mA h g−1, superior rate capability of 79.3 mA h g−1 at 20 C, and 85.4 % capacity retention after 500 cycles at 5 C. The sufficient Na and complete solid‐solution reaction are critical to realizing high‐performance P2‐type cathodes for sodium‐ion batteries.
A high sodium content (0.85) and plateau‐free P2‐type cathode, Na0.85Li0.12Ni0.22Mn0.66O2, is developed for sodium‐ion batteries. The sodium content promises a large specific capacity of 123.4 mA h g−1 with an average working voltage as high as 3.5 V. The complete solid‐solution reaction over a wide voltage range ensures small volume variation (1.7 %) and fast Na+ kinetics (10−10 to 10−11 cm2 s−1), contributing to both excellent cycling stability and rate capability.
In response to the call for safer high‐energy‐density storage systems, high‐voltage solid‐state Li metal batteries have attracted extensive attention. Therefore, solid electrolytes are required to be ...stable against both Li anode and high‐voltage cathodes; nevertheless, the requirements still cannot be completely satisfied. Herein, a heterogeneous multilayered solid electrolyte (HMSE) is proposed to broaden electrochemical window of solid electrolytes to 0–5 V, through different electrode/electrolyte interfaces to overcome the interfacial instability problems. Oxidation‐resistance poly(acrylonitrile) (PAN) is in contact with the cathode, while reduction tolerant polyethylene glycol diacrylate contacts with Li metal anode. A Janus and flexible PAN@Li1.4Al0.4Ge1.6(PO4)3 (80 wt%) composite electrolyte is designed as intermediate layer to inhibit dendrite penetration and ensure compact interface. Paired with LiNi0.6Co0.2Mn0.2O2 and LiNi0.8Co0.1Mn0.1O2 cathodes, which are rarely used in solid‐state batteries, the solid‐state Li metal batteries with HMSE exhibit excellent electrochemical performance including high capacity and long cycle life. Besides, the Li||Li symmetric batteries maintain a stable polarization less than 40 mV for more than 1000 h under 2 mA cm−2 and effective inhibition of dendrite formation. This study offers a promising approach to extend the applications of solid electrolytes for high‐voltage solid‐state Li metal batteries.
A heterogeneous multilayered structure that expands the electrochemical window of solid electrolytes is designed. The oxidation‐resistant poly(acrylonitrile) (PAN) and reduction‐tolerant polyethylene glycol diacrylate integrated with the Janus and flexible PAN@Li1.4Al0.4Ge1.6(PO4)3 (80 wt%) composite electrolyte broaden the electrochemical window to 0–5 V, resulting in excellent performance for high‐voltage solid‐state Li‐metal batteries. Additionally, the thickness of electrolyte is below 25 μm.
Sodium‐ion batteries (SIBs) are still confronted with several major challenges, including low energy and power densities, short‐term cycle life, and poor low‐temperature performance, which severely ...hinder their practical applications. Here, a high‐voltage cathode composed of Na3V2(PO4)2O2F nano‐tetraprisms (NVPF‐NTP) is proposed to enhance the energy density of SIBs. The prepared NVPF‐NTP exhibits two high working plateaux at about 4.01 and 3.60 V versus the Na+/Na with a specific capacity of 127.8 mA h g−1. The energy density of NVPF‐NTP reaches up to 486 W h kg−1, which is higher than the majority of other cathode materials previously reported for SIBs. Moreover, due to the low strain (≈2.56% volumetric variation) and superior Na transport kinetics in Na intercalation/extraction processes, as demonstrated by in situ X‐ray diffraction, galvanostatic intermittent titration technique, and cyclic voltammetry at varied scan rates, the NVPF‐NTP shows long‐term cycle life, superior low‐temperature performance, and outstanding high‐rate capabilities. The comparison of Ragone plots further discloses that NVPF‐NTP presents the best power performance among the state‐of‐the‐art cathode materials for SIBs. More importantly, when coupled with an Sb‐based anode, the fabricated sodium‐ion full‐cells also exhibit excellent rate and cycling performances, thus providing a preview of their practical application.
A high‐voltage sodium‐super‐ion‐conductor‐type cathode significantly enhances the energy density of sodium‐ion batteries. Its low‐strain crystal lattice during the successive (de‐)sodiation and superior Na transport kinetics promise high‐rate capabilities, long‐term cycle life, superior low‐temperature performance, and excellent full‐cell performance, providing a preview of their practical applications.
Layered transition metal oxide P2‐Na2/3Ni1/3Mn2/3O2 usually suffers from large‐volume phase transitions and different Na‐vacancy ordering during sodium (de)intercalation, incurring rapid capacity ...decline and poor rate capability. Herein, an effective strategy based on synergetic effect of selected multiple metal ions is designed for P2‐type cathodes with improved performance. The role of tetravalent titanium provides high redox potential, inactive divalent magnesium stabilizes the structure, and the monovalent lithium smooths the electrochemical curves. The combined analysis of in operando X‐ray diffraction, in operando X‐ray absorption spectroscopy and density functional theory calculations demonstrates the contribution of multi‐metal ions converts the unfavorable and large‐volume P2 to O2 transition into a moderate “Z”‐intergrowth structure by increasing the energy barrier of transition metal slab gliding. As a consequence, the resultant P2‐Na0.7Li0.03Mg0.03Ni0.27Mn0.6Ti0.07O2 electrode delivers a reversible capacity of 134 mAh g−1, a working voltage of 3.57 V, excellent cycling stability (82% of capacity retention after 200 cycles), and superior rate performance (110 mAh g−1 at 4 C). Full cells fabricated with a hard carbon anode achieve an energy density of 296 Wh kg−1. This study presents a route to rationally design cathode materials with this functionalization to improve the cell performance for sodium‐ion batteries.
Herein, a co‐substitution strategy is proposed for P2‐Na2/3Ni1/3Mn2/3O2 to realize high‐energy sodium‐ion batteries. On account of the synergetic effects of Li+ (suppressing Na‐vacancy ordering), Ti4+ (increasing redox potential), and Mg2+ (stabilizing structure), the as‐obtained Na0.7Li0.03Mg0.03Ni0.27Mn0.6Ti0.07O2 electrode demonstrates moderate phase transition behavior and superior electrochemical performance.
High‐Energy Aqueous Sodium‐Ion Batteries Jin, Ting; Ji, Xiao; Wang, Peng‐Fei ...
Angewandte Chemie International Edition,
May 17, 2021, Volume:
60, Issue:
21
Journal Article
Peer reviewed
Water‐in‐salt electrolytes (WISE) have largely widened the electrochemical stability window (ESW) of aqueous electrolytes by formation of passivating solid electrolyte interphase (SEI) on anode and ...also absorption of the hydrophobic anion‐rich double layer on cathode. However, the cathodic limiting potential of WISE is still too high for most high‐capacity anodes in aqueous sodium‐ion batteries (ASIBs), and the cost of WISE is also too high for practical application. Herein, a low‐cost 19 m (m: mol kg−1) bi‐salts WISE with a wide ESW of 2.8 V was designed, where the low‐cost 17 m NaClO4 extends the anodic limiting potential to 4.4 V, while the fluorine‐containing salt (2 m NaOTF) extends the cathodic limiting potential to 1.6 V by forming the NaF–Na2O–NaOH SEI on anode. The 19 m NaClO4–NaOTF–H2O electrolyte enables a 1.75 V Na3V2(PO4)3∥Na3V2(PO4)3 full cell to deliver an appreciable energy density of 70 Wh kg−1 at 1 C with a capacity retention of 87.5 % after 100 cycles.
A NaClO4/NaOTF electrolyte was designed for aqueous Na‐ion batteries (ASIBs). The solid electrolyte interphase (SEI) containing NaF–Na2O–NaOH forming on the anode extended the cathodic limiting potential of electrolyte to 1.6 V, and the hydrophobic anions extend the anodic to 4.4 V. A 1.75 V Na3V2(PO4)3∥Na3V2(PO4)3 cell achieved a high energy density of 70 Wh kg−1 with 87.5 % capacity retention after 100 cycles.
Room‐temperature sodium‐ion batteries (SIBs) have shown great promise in grid‐scale energy storage, portable electronics, and electric vehicles because of the abundance of low‐cost sodium. ...Sodium‐based layered oxides with a P2‐type layered framework have been considered as one of the most promising cathode materials for SIBs. However, they suffer from the undesired P2–O2 phase transition, which leads to rapid capacity decay and limited reversible capacities. Herein, we show that this problem can be significantly mitigated by substituting some of the nickel ions with magnesium to obtain Na0.67Mn0.67Ni0.33−xMgxO2 (0≤x≤0.33). Both the reversible capacity and the capacity retention of the P2‐type cathode material were remarkably improved as the P2–O2 phase transition was thus suppressed during cycling. This strategy might also be applicable to the modulation of the physical and chemical properties of layered oxides and provides new insight into the rational design of high‐capacity and highly stable cathode materials for SIBs.
The P2–O2 phase transition in P2‐Na0.67Mn0.67Ni0.33−xMgxO2 can be effectively suppressed by substituting some of the nickel ions with magnesium. Both the reversible capacity and the capacity retention of this cathode material were thus remarkably improved, and the various phases were characterized by scanning tunneling electron microscopy with atomic resolution.
Abstract
Na-ion cathode materials operating at high voltage with a stable cycling behavior are needed to develop future high-energy Na-ion cells. However, the irreversible oxygen redox reaction at ...the high-voltage region in sodium layered cathode materials generates structural instability and poor capacity retention upon cycling. Here, we report a doping strategy by incorporating light-weight boron into the cathode active material lattice to decrease the irreversible oxygen oxidation at high voltages (i.e., >4.0 V vs. Na
+
/Na). The presence of covalent B–O bonds and the negative charges of the oxygen atoms ensures a robust ligand framework for the NaLi
1/9
Ni
2/9
Fe
2/9
Mn
4/9
O
2
cathode material while mitigating the excessive oxidation of oxygen for charge compensation and avoiding irreversible structural changes during cell operation. The B-doped cathode material promotes reversible transition metal redox reaction enabling a room-temperature capacity of 160.5 mAh g
−1
at 25 mA g
−1
and capacity retention of 82.8% after 200 cycles at 250 mA g
−1
. A 71.28 mAh single-coated lab-scale Na-ion pouch cell comprising a pre-sodiated hard carbon-based anode and B-doped cathode material is also reported as proof of concept.
PDF
