An ultrahigh performance MoS2 photodetector with high photoresponsivity (1.94 × 106 A W–1) and detectivity (1.29 × 1012 Jones) under 520 nm and 4.63 pW laser exposure is demonstrated. This ...photodetector is based on a methyl‐ammonium lead halide perovskite/MoS2 hybrid structure with (3‐aminopropyl)triethoxysilane doping. The performance degradation caused by moisture is also minimized down to 20% by adopting a new encapsulation bilayer of octadecyltrichlorosilane/polymethyl methacrylate.
Most doping research into transition metal dichalcogenides (TMDs) has been mainly focused on the improvement of electronic device performance. Here, the effect of self‐assembled monolayer (SAM)‐based ...doping on the performance of WSe2‐ and MoS2‐based transistors and photodetectors is investigated. The achieved doping concentrations are ≈1.4 × 1011 for octadecyltrichlorosilane (OTS) p‐doping and ≈1011 for aminopropyltriethoxysilane (APTES) n‐doping (nondegenerate). Using this SAM doping technique, the field‐effect mobility is increased from 32.58 to 168.9 cm2 V−1 s in OTS/WSe2 transistors and from 28.75 to 142.2 cm2 V−1 s in APTES/MoS2 transistors. For the photodetectors, the responsivity is improved by a factor of ≈28.2 (from 517.2 to 1.45 × 104 A W−1) in the OTS/WSe2 devices and by a factor of ≈26.4 (from 219 to 5.75 × 103 A W−1) in the APTES/MoS2 devices. The enhanced photoresponsivity values are much higher than that of the previously reported TMD photodetectors. The detectivity enhancement is ≈26.6‐fold in the OTS/WSe2 devices and ≈24.5‐fold in the APTES/MoS2 devices and is caused by the increased photocurrent and maintained dark current after doping. The optoelectronic performance is also investigated with different optical powers and the air‐exposure times. This doping study performed on TMD devices will play a significant role for optimizing the performance of future TMD‐based electronic/optoelectronic applications.
High‐performance transition metal dichalcogenides (TMD) photodetectors are enhanced by self‐assembled monolayer (SAM) doping. The photoresponsivity of WSe2 and MoS2 photodetectors is improved by a factor of ≈28.2 (with OTS p‐doping) and ≈26.4 (with APTES n‐doping), respectively. These improvements are attributed to the enhancement of TMD optical properties by SAM doping and this is also investigated in detail through photoluminescence analysis.
Recently, negative differential resistance devices have attracted considerable attention due to their folded current-voltage characteristic, which presents multiple threshold voltage values. Because ...of this remarkable property, studies associated with the negative differential resistance devices have been explored for realizing multi-valued logic applications. Here we demonstrate a negative differential resistance device based on a phosphorene/rhenium disulfide (BP/ReS
) heterojunction that is formed by type-III broken-gap band alignment, showing high peak-to-valley current ratio values of 4.2 and 6.9 at room temperature and 180 K, respectively. Also, the carrier transport mechanism of the BP/ReS
negative differential resistance device is investigated in detail by analysing the tunnelling and diffusion currents at various temperatures with the proposed analytic negative differential resistance device model. Finally, we demonstrate a ternary inverter as a multi-valued logic application. This study of a two-dimensional material heterojunction is a step forward toward future multi-valued logic device research.
Spherical-shaped graphene oxide-embedded chitosan/gelatin hydrogel particles (CGGO) were prepared by using inverse suspension method from biopolymers chitosan and gelatin with graphene oxide for the ...adsorption of heavy metal ions (HM). The prepared CGGO particles were characterized by various physicochemical techniques such as field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy analysis, X-ray diffraction, and Fourier transform infrared spectrometry. HM-Pb(II), Cd(II), Hg(II), and Cr(III) adsorption experiments using CGGO showed 55% removal efficiency of Hg(II) in the single metal system. However, in the multiple metal ion system, all metal ions showed removal efficiency > 70%. This suggests that the prepared hydrogel particles can be effectively used for the removal of HM. The preparation method also paves the way for the large-scale production of hydrogel particles as HM adsorbents.
A surface-enhanced Raman scattering (SERS) sensor comprising silver nanowires (AgNWs) and genetically engineered M13 bacteriophages expressing a tryptophan–histidine–tryptophan (WHW) peptide sequence ...(BPWHW) was fabricated by simple mixing of BPWHW and AgNW solutions, followed by vacuum filtration onto a glass-fiber filter paper (GFFP) membrane. The AgNWs stacked on the GFFP formed a high density of SERS-active hot spots at the points of nanowire intersections, and the surface-coated BPWHW functioned as a bioreceptor for selective pesticide detection. The BPWHW-functionalized AgNW (BPWHW/AgNW) sensor was characterized by scanning electron microscopy, confocal scanning fluorescence microscopy, atomic force microscopy, and Fourier transform infrared spectroscopy. The Raman signal enhancement and the selective pesticide SERS detection properties of the BPWHW/AgNW sensor were investigated in the presence of control substrates such as wild-type M13 bacteriophage-decorated AgNWs (BPWT/AgNW) and undecorated AgNWs (AgNW). The BPWHW/AgNW sensor exhibited a significantly higher capture capability for pesticides, especially paraquat (PQ), than the control SERS substrates, and it also showed a relatively higher selectivity for PQ than for other bipyridylium pesticides such as diquat and difenzoquat. Furthermore, as a field application test, PQ was detected on the surface of PQ-pretreated apple peels, and the results demonstrated the feasibility of using a paper-based SERS substrate for on-site residual pesticide detection. The developed M13 bacteriophage-functionalized AgNW SERS sensor might be applicable for the detection of various pesticides and chemicals through modification of the M13 bacteriophage surface peptide sequence.
Display omitted
•We devise a SERS substrate prepared by direct nucleation of AuNPs on paper without using reducing agents.•Size of AuNPs was controlled through the changes in pH of Au precursor ...solution.•The paper-based SERS substrate was used for label-free pesticide detection.•Field applicable test was performed using portable Raman spectrometer on pesticide contaminated apple peels.
We introduce a facile and low-cost method for fabricating gold nanostructures on cellulose filter paper (CFP) to prepare a paper-based surface-enhanced Raman scattering (SERS) sensor for label-free molecular detection. Polymerized dopamine (PD) was used as an adhesive layer on the CFP and simultaneously functioned as a reducing agent for gold nanoparticle (AuNP) nucleation. The size of the AuNPs was dependent on the pH of the gold precursor solution, and nanoparticles with an average size of 102 nm were formed on the PD-coated CFP at a pH 3, exhibiting high SERS activity. Finite-difference time-domain (FDTD) simulations of the electromagnetic field enhancement of AuNPs with different sizes and interparticle distances were performed to identify the origin of the SERS effect. The developed paper-based SERS substrate showed uniform and excellent molecular sensitivity with a limit of detection (LOD) of 10−7 M for methylene blue, as measured by a portable Raman spectrometer. Furthermore, as a field application test, surfaces of apples were pretreated with diquat (DQ) and paraquat (PQ) pesticides, which were then detected down to a concentration of 1 ppm after simple attachment of the sensor on the apple peels and performing a SERS measurement. The developed paper-based SERS sensor is expected to be applicable as a label-free sensor for a variety of chemical and biological molecules.
This article describes a simple preparation of chitosan/gelatin (CG) spherical hydrogel particles for the effective removal of multiple heavy metal ions. The CG hydrogel particles were prepared by ...inverse emulsion from the aqueous solutions of chitosan, gelatin, and glutaraldehyde. The oven-dried C2G1 hydrogel particles showed a maximum removal efficiency of 98% for Hg(II) ions in a single metal ion solution and which was higher than C1G1 (85%) and C1G2 (58%) particles. This result was affected by the composition of the hydrogels rather than the pore size or degree of swelling. Remarkably, the removal efficiencies for the Pb(II), Cd(II), Hg(II), and Cr(III) ions reached about 73%–94% in a multiple metal ion solution. The results indicate that the CG hydrogel particles can be used to remove coexisting heavy metal ions from wastewater, providing a versatile method to remove multiple metal ions from natural or industrial wastes.
If “the connectome” represents a complete map of anatomical and functional connectivity in the brain, it should also include glia. Glia define and regulate both the brain’s anatomical and functional ...connectivity over a broad range of length scales, spanning the whole brain to subcellular domains of synaptic interactions. This Perspective article examines glial interactions with the neuronal connectome (including long-range networks, local circuits, and individual synaptic connections) and highlights opportunities for future research. Our understanding of the structure and function of the neuronal connectome would be incomplete without an understanding of how all types of glia contribute to neuronal connectivity and function, from single synapses to circuits.
Determining the brain’s connectome will require detailed analysis of non-neuronal cells (glia). The Perspective by Fields et al. examines how oligodendrocytes, astrocytes, and microglia define and regulate anatomical and functional connectivity of neurons from subcellular domains to long-distant networks.
The effects of graphene n‐doping on a metal–graphene contact are studied in combination with 1D edge contacts, presenting a record contact resistance of 23 Ω μm at room temperature (19 Ω μm at 100 ...K). This contact scheme is applied to a graphene–perovskite hybrid photodetector, significantly improving its performance (0.6 → 1.8 A W−1 in photoresponsivity and 3.3 × 104 → 5.4 × 104 Jones in detectivity).
Deep brain stimulation (DBS) is one option for treating refractory Tourette syndrome (TS); however, it remains unclear which preoperative factors are predictive of DBS outcomes. This study ...investigated the efficacy of DBS targeting the anteromedial globus pallidus internus and evaluated predisposing factors affecting the outcomes of DBS in a single center in Korea.
Twenty patients who had undergone DBS for refractory TS were reviewed retrospectively. Tic symptoms were followed up at 3-month intervals for up to 1 year after surgery. The Yale Global Tic Severity Scale was used to evaluate preoperative/postoperative tic symptoms. Scores from the Yale-Brown Obsessive Compulsive Scale, Beck Depression Inventory-II, and Beck Anxiety Inventory were also evaluated.
Patients with refractory TS achieved improvement in tic symptoms within 1 year after DBS. Initial responders who achieved a 35% reduction in Yale Global Tic Severity Scale total score within the first 3 months after DBS showed larger treatment effects during 1-year follow-up. Although no clinical or demographic factors were predictive of initial responses, patients with serious self-injurious behaviors tended to show delayed responses.
This is the first study to our knowledge to report the DBS outcomes of 20 patients with TS in a single center in Asia. Our study supports the efficacy of DBS targeting anteromedial globus pallidus internus in refractory TS with no evident serious adverse events. Initial responses after DBS seem to be a predictor of long-term outcomes after surgery.
PDF
