Single-cell capillary electrophoresis mass spectrometry (CE-MS) is a promising platform to analyze cellular contents and probe cell heterogeneity. However, current single-cell CE-MS methods often ...rely on offline microsampling processes and may demonstrate low sampling precision and accuracy. We have recently developed an electrospray-assisted device, spray-capillary, for low-volume sample extraction. With the spray-capillary, low-volume samples (pL–nL) are drawn into the sampling end of the device, which can be used directly for CE separation and online MS detection. Here, we redesigned the spray-capillary by utilizing a capillary with a <15 μm tapered tip so that it can be directly inserted into single cells for sample collection and on-capillary CE-MS analysis. We evaluated the performance of the modified spray-capillary by performing single-cell microsampling on single onion cells with varying sample injection times and direct MS analysis or online CE-MS analysis. We have demonstrated, for the first time, online sample collection and CE-MS for the analysis of single cells. This application of the modified spray-capillary device facilitates the characterization and relative quantification of hundreds of metabolites in single cells.
This work reports on the development of the first capillary electrophoresis methodology for the elucidation of extracellular vesicles’ (EVs) electrokinetic distributions. The approach is based on ...capillary electrophoresis coupled with laser-induced fluorescent (LIF) detection for the identification and quantification of EVs after their isolation. Sensitive detection of these nanometric entities was possible thanks to an ‘inorganic-species-free’ background electrolyte. This electrolyte was made up of weakly charged molecules at very high concentrations to stabilize EVs, and an intra-membrane labelling approach was used to prevent EV morphology modification. The limit of detection for EVs achieved using the developed CE-LIF method reached 8 × 109 EV/mL, whereas the calibration curve was acquired from 1.22 × 1010 to 1.20 × 1011 EV/mL. The CE-LIF approach was applied to provide the electrokinetic distributions of various EVs of animal and human origins, and visualize different EV subpopulations from our recently developed high-yield EV isolation method.
Display omitted
•A new CE-LIF tool for characterization and quantification of EVs was developed.•The new BGE was applied for excellent performance of CE-LIF of EVs.•Intra-membrane labelling was optimized without incurring EV morphology modification.•Separation and detection of EVs from different animal and human origins were implemented.
•The interesting inorganic anions in saliva were directly determined by CE–C4D.•The LODs could reach ng/mL level with the assistance of online enrichment approach.•The advantages are high ...sensitivity, low cost fabrication and without derivatization.•This proposed method provided a potential fast screening tool for clinical test.
A capillary electrophoresis approach with capacitively coupled contactless conductivity detection method has been developed for the determination of inorganic metabolites (thiocyanate, nitrite and nitrate) in human saliva. Field amplified sample injection, as a simple sample stacking technique, was used in conjunction for online preconcentration of above inorganic anions. A selective separation for the target anions from other coexisting constituents present in saliva could be obtained within 14min in a 10mmol/L His—90mmol/L HAc buffer (pH 3.70) at the separation voltage of −18kV. The limits of detection and limits of quantification of the three analytes were within the range of 3.1–4.9ng/mL (S/N=3) and 10–16ng/mL (S/N=10), respectively. The average recovery data were in the range of 81–108% at three different concentrations. This method provides a simple, rapid and direct approach for metabolite analyses of nitric oxide and cyanide based on noninvasive saliva sample, which presents a potential fast screening tool for clinical test.
Foodborne bacteria threaten human's health. Capillary electrophoresis (CE) is a powerful separation means for the determination of bacteria. Direct separation of bacteria suffers from the shortages ...of low resolution, channel adsorption, and bacterial aggregation. In this work, a method of nucleic acid strand displacement was developed to indirect separate the bacteria by CE. DNA complexes, consisting of probes and aptamers, were mixed with the three bacteria Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. The aptamers could specifically bond with bacteria and release the probes. Through the separation of the probes, the bacteria could be indirectly determined by CE. This method avoided the shortages of direct separation of bacteria. Under the optimized conditions, the three probes for the bacteria could be separated and detected within 2.5 min by high‐speed CE with laser‐induced fluorescence detection. The limits of detection for the bacteria were in the range 4.20 × 106 to 1.75 × 107 CFU/mL. Finally, the developed method was applied on the study of antagonism of the coexistent bacteria to reveal the relationship between them. Furthermore, the efficiency of bacteriostasis of three traditional Chinese medicines, Coptis chinensis, Schisandra chinensis, and honeysuckle, was also studied by this method.
This paper analyzes the role of the diffusion coefficient in the movement of analytes that can reversibly react with a selector given a product in the presence of drift. The problem mimics the ...movement of enantiomers in a capillary electrophoresis experiment. As is well known, the signal in the capillary must be sharp enough to make a good determination of the effective mobility of the analytes being analyzed. The essence of the technique is based on fast interconversion rates. Therefore, the effective diffusion coefficient must be negligible during the experiment. In the present work, an exact expression for both the apparent mobility and the diffusion coefficient is obtained. This is done by writing the rate equations governing the process and solving them using the generating function technique. The effective mobility coincides with the Wren and Rowe equation, whereas the diffusion coefficient allows us to determine the values of the parameters to be taken into account so that this quantity is minimal or close to zero. On the other hand, the numerical solution of the kinetic equations and Monte Carlo simulations allow us to follow the signal in the capillary and to determine its space–time evolution.
Blood volume in dried blood spot (DBS) analysis is assumed to be constant for DBS punches with a fixed area. However, blood volume in the punch is dependent on several factors associated with the ...blood composition and is preferentially normalized by off-line analysis for quantitative purposes. Instead of using external instrumentation, we present an all-in-one approach for the simultaneous determination of exact blood volume in the DBS punch and the quantitation of target analytes. A DBS is eluted with 500 μL of elution solvent in a sample vial, and the eluate is directly subjected to an automated analysis by capillary electrophoresis with capacitively coupled contactless conductivity detection (CE-C4D). The capillary blood volume in the eluate is calculated from the concentrations of the inorganic blood constituents (K+, Na+, or Cl–) determined by CE-C4D, which are linearly proportional to the blood volume originally sampled onto the DBS card. Alternatively, conductivity of the DBS eluate can be used for the blood volume determination by using C4D in a nonseparation flow-through mode. The methods are suitable for the determination of blood volume in unknown DBS samples by punching out the entire DBS or by subpunching a small section of a large DBS with variations of the true vs the determined volume ≤5.5%. Practical suitability was demonstrated by the simultaneous CE-C4D determination of K+ and Na+ (for DBS volume calculation) and amino acids (target analytes) in unknown DBS samples. Quantitative analysis of selected amino acids (related to inborn metabolic disorders) in the unknown DBS was compared with a standard analytical procedure using wet-blood chemistry, and an excellent fit was obtained. The use of CE-C4D represents an important milestone in quantitative DBS analysis since the detection technique is universal, and the separation technique enables the determination of cations and/or anions and the use of multiple detectors, which further enhance selectivity/sensitivity of the analysis and the range of detectable analytes.
Field amplified sample stacking (FASS) uses differential electrophoretic velocity of analyte ions in the high‐conductivity background electrolyte zone and low conductivity sample zone for increasing ...the analyte concentration. The stacking rate of analyte ions in FASS is limited by molecular diffusion and convective dispersion due to nonuniform electroosmotic flow (EOF). We present a theoretical scaling analysis of stacking dynamics in FASS and its validation with a large set of on‐chip sample stacking experiments and numerical simulations. Through scaling analysis, we have identified two stacking regimes that are relevant for on‐chip FASS, depending upon whether the broadening of the stacked peak is dominated by axial diffusion or convective dispersion. We show that these two regimes are characterized by distinct length and time scales, based on which we obtain simplified nondimensional relations for the temporal growth of peak concentration and width in FASS. We first verify the theoretical scaling behavior in diffusion‐ and convection‐dominated regimes using numerical simulations. Thereafter, we show that the experimental data of temporal growth of peak concentration and width at varying electric fields, conductivity gradients, and EOF exhibit the theoretically predicted scaling behavior. The scaling behavior described in this work provides insights into the effect of varying experimental parameters, such as electric field, conductivity gradient, electroosmotic mobility, and electrophoretic mobility of the analyte on the dynamics of on‐chip FASS.
•Explored the effects of particle electrical charge on insulator-based dielectrophoresis assessments.•Provides an alternative to electrophoresis for the separation of particles by exploiting charge ...differences.•Demonstrated the separation of similar types of particles by combining charge differences with dielectrophoresis.
Dielectrophoresis (DEP), the migration of particles due to polarization effects under the influence of a nonuniform electric field, was employed for characterizing the behavior and achieving the separation of larger (diameter >5 μm) microparticles by exploiting differences in electrical charge. Usually, electrophoresis (EP) is the method of choice for separating particles based on differences in electrical charge; however, larger particles, which have low electrophoretic mobilities, cannot be easily separated with EP-based techniques. This study presents an alternative for the characterization, assessment, and separation of larger microparticles, where charge differences are exploited with DEP instead of EP. Polystyrene microparticles with sizes varying from 5 to 10 μm were characterized employing microdevices for insulator-based dielectrophoresis (iDEP). Particles within an iDEP microchannel were exposed simultaneously to DEP, EP, and electroosmotic (EO) forces. The electrokinetic behavior of four distinct types of microparticles was carefully characterized by means of velocimetry and dielectrophoretic capture assessments. As a final step, a dielectropherogram separation of two distinct types of 10 μm particles was devised by first characterizing the particles and then performing the separation. The two types of 10 μm particles were eluted from the iDEP device as two separate peaks of enriched particles in less than 80 s. It was demonstrated that particles with the same size, shape, surface functionalization, and made from the same bulk material can be separated with iDEP by exploiting slight differences in the magnitude of particle charge. The results from this study open the possibility for iDEP to be used as a technique for the assessment and separation of biological cells that have very similar characteristics (shape, size, similar make-up), but slight variance in surface electrical charge.
While the amino acids, enzymes and hormones are chiral, chirality plays significant role in the life of plants, animals, as well as the human being. Chirality of molecules is important in various ...industries, such as pharmaceutical, agricultural, food, electronics, etc. Chiral drugs may have different bioavailability, distribution, biotransformation and excretion, as well as quantitatively and/or qualitatively different pharmacological or toxic properties. Enantiomerically pure chiral drugs have been increasingly developed for the pharmaceutical market due to their superiority from the viewpoints of potency and safety. This is supported by the development of new methods for enantioselective production of the chiral compounds, as well as by the capability of the enantioselective analytical methods to allow a detection and quantification of minor enantiomeric impurity in the presence of another enantiomer in a large excess. The aim of the present review is to provide a short summary of the basic principles of chiral separations on an analytical and preparative scale. In addition, some selected applications for analytical techniques, such as gas chromatography, supercritical fluid chromatography, high performance liquid chromatography, capillary electrophoresis and capillary electrochromatography for the separation of enantiomers of chiral pharmaceuticals published in the last two years are also discussed.
Listeria monocytogenes can survive in food production facilities and can be transmitted via contamination of food during the various stages of food production. This study was conducted to compile the ...results of three independent previous studies on the genetic diversity of L. monocytogenes in a poultry production company in Spain and to determine the potential virulence and sanitizer resistance of the strains by using both genotype and phenotype analyses. L. monocytogenes was detected at three production stages: a broiler abattoir, a processing plant, and retail stores marketing fresh poultry products from the same company. These three stages spanned three locations in three provinces of Spain. A set of 347 L. monocytogenes isolates representing 39 subtypes was obtained using pulsed-field gel electrophoresis (PFGE). A total of 28 subtypes (68%) had a full-length internalin A gene, and two subtypes had a phenotype with low potential for virulence because of a mutation in the prfA gene. A total of 32 subtypes (82%) were classified as benzalkonium chloride resistant (BAC-R) and contained the resistance determinant bcrABC (21 subtypes, 54%) or the resistance gene qacH (11 subtypes, 28%). A total of 13 persistent BAC-R subtypes (minimum of 3 months between the first and last sample from with the isolate was recovered) were identified at the abattoir and processing plant. The three production stages shared a unique subtype (PFGE type 1), which had the mutation in the prfA gene and the bcrABC resistance determinant. Whole genome sequencing revealed this subtype to be sequence type 31. Limited genetic diversity was noted in the isolates studied, including some subtypes that were persistent in the environment of the investigated facilities. Given the high prevalence of BAC-R subtypes, these results support the association between resistance to biocides and persistence of L. monocytogenes.
PDF
