Chlorine gas and sodium chlorate are two base chemicals produced through electrolysis of sodium chloride brine which find uses in many areas of industrial chemistry. Although the industrial ...production of these chemicals started over 100 years ago, there are still factors that limit the energy efficiencies of the processes. This review focuses on the unwanted production of oxygen gas, which decreases the charge yield by up to 5%. Understanding the factors that control the rate of oxygen production requires understanding of both chemical reactions occurring in the electrolyte, as well as surface reactions occurring on the anodes. The dominant anode material used in chlorate and chlor-alkali production is the dimensionally stable anode (DSA), Ti coated by a mixed oxide of RuO2 and TiO2. Although the selectivity for chlorine evolution on DSA is high, the fundamental reasons for this high selectivity are just now becoming elucidated. This review summarizes the research, since the early 1900s until today, concerning the selectivity between chlorine and oxygen evolution in chlorate and chlor-alkali production. It covers experimental as well as theoretical studies and highlights the relationships between process conditions, electrolyte composition, the material properties of the anode, and the selectivity for oxygen formation.
Additive manufacturing (AM) is a technology which has the potential not only to change the way of conventional industrial manufacturing processes, adding material instead of subtracting, but also to ...create entirely new production and business strategies. Since about three decades, AM technologies have been used to fabricate prototypes or models mostly from polymeric or metallic materials. Recently, products have been introduced into the market that cannot be produced in another way than additively. Ceramic materials are, however, not easy to process by AM technologies, as their processing requirements (in terms of feedstock and/or sintering) are very challenging. On the other hand, it can be expected that AM technologies, once successful, will have an extraordinary impact on the industrial production of ceramic components and, moreover, will open for ceramics new uses and new markets.
•Analyzed socio-economic impact: pre, during and post lockdown periods.•Considering India, we observed the following:aProduction: Halt in industrial production led to an approximately threefold ...increase in the unemployment rate.bIndexing (non-essential items): Capital goods and consumer durables dropped down to 7.1 and 5.1, respectively.cFuel demand: Demand for fuel and related products dropped down by almost 50%.dEquity markets: They dropped abruptly even before the announcement of the lockdown.eAssets: Gold and silver were reliable as compared to equity markets.•A socio-economic framework is presented to depict the policy-level interventions undertaken to mitigate upheaval induced by the pandemic.•Our case study could represent other countries/regions of the world.
Starting from December 2019, the novel COVID-19 threatens human lives and economies across the world. It was a matter of grave concern for the governments of all the countries as the deadly virus started expanding its paws over neighboring regions of infected areas. The spread got uncontrollable, thereby leaving no choice for the nations but to impose and observe nationwide lockdown. The lockdown further sorely hit many sectors, which in turn impacted the economy. Manufacturing, agriculture, and the service sector - the three pillars of the economy - have been adversely affected giving a major slow down to the economy belonging to every nation. Several schemes and policies were introduced by different state and central governments to absorb the impact of subsequent lockdowns on individuals. In this paper, we present a then and now analysis of the economy using a socioeconomic framework focusing on factors- unemployment, industrial production, import-export trade, equity markets, currency exchange rate, and gold and silver prices. For all these, we consider India as a case study because the Indian sub-continent has a wide landscape and rich cultural heritage presenting itself as a potential hub for economic activities. A thorough assessment has been made for the period January 2020- June 2020. The assessment will be beneficial to observe the long-term impact of any infectious disease outbreak such as COVID-19 locally and globally.
Display omitted
•The use of lipases is one alternative for cleaner production of biodiesel.•Use of unconventional low-cost raw materials, new supports, mechanisms of lipase immobilization ...discussed.•Immobilized lipase for biodiesel production increment enzyme stability and reusability.•Combinations, pre or post-treatment, alcohol addition, glycerol, and silica gel.•A discussion as to what could make industrial lipase biodiesel production economically viable.
The rising global demand for sustainable energy resources is resulting in an accelerated increase in biodiesel consumption. In this sense, studies aimed at tackling process hurdles in biodiesel production have been continuously carried out. In order to reduce energy consumption and the amount of wastewater generated, as well as to avoid the production of inefficient end products, classes of enzymes, especially lipases, are being successfully explored as substitutes to chemical catalysts. This article highlights several aspects of lipase-catalyzed biodiesel production. The recent advances and the future perspectives of mechanisms that could circumvent the well-known problems inherent in these systems are presented and discussed, such as the low-stability and the pricing of biocatalysts. According to the literature, alternative solutions include the use of low-cost, unconventional raw materials, new supports, the elucidation of mechanisms of lipase immobilization, and optimal designs and operational settings for bioreactors. Finally, there is a discussion around the necessary steps to enable an economically-viable industrial production.
Covalent triazine frameworks (CTFs) with aromatic triazine linkages have recently received increasing interest for various applications because of their rich nitrogen content and high chemical ...stability. Owing to the strong aromatic C=N bond and high chemical stability, only a few CTFs are crystalline, and most CTFs are amorphous. Herein we report a new general strategy to give highly crystalline CTFs by in situ formation of aldehyde monomers through the controlled oxidation of alcohols. This general strategy allows a series of crystalline CTFs with different monomers to be prepared, which are shown to have higher thermal stability and enhanced performance in photocatalysis as compared with the less crystalline or amorphous CTFs. This open‐system approach is very simple and convenient, which presents a potential pathway to large‐scale industrial production of crystalline CTFs.
COF mixture: Covalent triazine frameworks (CTFs) a class of covalent organic framework (COF) were synthesized by in situ formation of aldehyde monomers by the controlled oxidation of alcohols in an open system. This approach is very simple, convenient, and general and presents a potential pathway to large‐scale industrial production of crystalline CTFs.
Graphene, in its ideal form, is a two-dimensional (2D) material consisting of a single layer of carbon atoms arranged in a hexagonal lattice. The richness in morphological, physical, mechanical, and ...optical properties of ideal graphene has stimulated enormous scientific and industrial interest, since its first exfoliation in 2004. In turn, the production of graphene in a reliable, controllable, and scalable manner has become significantly important to bring us closer to practical applications of graphene. To this end, chemical vapor deposition (CVD) offers tantalizing opportunities for the synthesis of large-area, uniform, and high-quality graphene films. However, quite different from the ideal 2D structure of graphene, in reality, the currently available CVD-grown graphene films are still suffering from intrinsic defective grain boundaries, surface contaminations, and wrinkles, together with low growth rate and the requirement of inevitable transfer. Clearly, a gap still exits between the reality of CVD-derived graphene, especially in industrial production, and ideal graphene with outstanding properties. This Review will emphasize the recent advances and strategies in CVD production of graphene for settling these issues to bridge the giant gap. We begin with brief background information about the synthesis of nanoscale carbon allotropes, followed by the discussion of fundamental growth mechanism and kinetics of CVD growth of graphene. We then discuss the strategies for perfecting the quality of CVD-derived graphene with regard to domain size, cleanness, flatness, growth rate, scalability, and direct growth of graphene on functional substrate. Finally, a perspective on future development in the research relevant to scalable growth of high-quality graphene is presented.
This article studies how systemic risk and financial market distress affect the distribution of shocks to real economic activity. We analyze how changes in 19 different measures of systemic risk skew ...the distribution of subsequent shocks to industrial production and other macroeconomic variables in the US and Europe over several decades. We also propose dimension reduction estimators for constructing systemic risk indexes from the cross section of measures and demonstrate their success in predicting future macroeconomic shocks out of sample.
With the development of advanced electronic devices and electric power systems, polymer-based dielectric film capacitors with high energy storage capability have become particularly important. ...Compared with polymer nanocomposites with widespread attention, all-organic polymers are fundamental and have been proven to be more effective choices in the process of scalable, continuous, and large-scale industrial production, leading to many dielectric and energy storage applications. In the past decade, efforts have intensified in this field with great progress in newly discovered dielectric polymers, fundamental production technologies, and extension toward emerging computational strategies. This review summarizes the recent progress in the field of energy storage based on conventional as well as heat-resistant all-organic polymer materials with the focus on strategies to enhance the dielectric properties and energy storage performances. The key parameters of all-organic polymers, such as dielectric constant, dielectric loss, breakdown strength, energy density, and charge–discharge efficiency, have been thoroughly studied. In addition, the applications of computer-aided calculation including density functional theory, machine learning, and materials genome in rational design and performance prediction of polymer dielectrics are reviewed in detail. Based on a comprehensive understanding of recent developments, guidelines and prospects for the future development of all-organic polymer materials with dielectric and energy storage applications are proposed.
PDF
