The impact of process parameters on test specimen deviations and their correlation with AE signals captured during the injection moulding cycle
Kusić, Dragan ...
The aim of this work was to investigate the influence of six injection moulding process parameters on the post-moulding shrinkage and warping of parts made from polypropylene filled with calcium ...carbonate, as used in large quantities throughout the automotive industry. For experimental purposes, standard test specimens were used for the determination of post-moulding shrinkage and warping. Each experiment was observed precisely through the measurement of acoustic emission (AE) signals and in-cavity pressure. We scanned each test specimen using an optical 3D scanner for accurate measurement of post-moulding shrinkage and warping. The optimal set of parameters that provides minimal post-moulding shrinkage and warping, was determined by the Taguchi method, together with nominally-the-best (type II) quality characteristic. The most influential parameter was statistically obtained through analysis of variance, which showed that packing pressure had the largest impact. The results from the measured AE signals showed clear correlation with the post-moulding shrinkage and warping, indicating the possibility of on-line monitoring the adequacy of the process by capturing AE signals.
It was not necessary to add the material to the shelf.
Bibliographic material was successfully added on shelf.
Adding bibliographical material on shelf was not successful.
Material is already on the shelf.
Permalink
URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year
Impact factor
Edition
Category
Classification
JCR
SNIP
JCR
SNIP
JCR
SNIP
JCR
SNIP
Select the library membership card:
DRS,
in which the journal is indexed
Database name
Field
Year
Links to authors' personal bibliographies
Links to information on researchers in the SICRIS system
Subject headings in COBISS General List of Subject Headings
Select pickup location
The material from the parent unit is free. If the material is delivered to the pickup location from another unit, the library may charge you for this service.
