E-resources
Peer reviewed
Open access
-
Jamil, Uzair; Sadat, Seyyed Ali; Pearce, Joshua M.
Renewable energy, July 2024, Volume: 228Journal Article
Solar photovoltaic (PV) wood-based rack designs support distributed manufacturing, have lifetimes equivalent to PV warranties, have lower embodied energy and carbon emissions and cost less than conventional racking. Unfortunately, wood racking does not enable the standard front surface attachments. To overcome this challenge this study introduces novel 3D printed clamps for front-surface PV mounting on wood racking. Four topologies (square spacer, H-shaped spacer, U-shaped clamp and T-shaped clamp) of 3D printed parts are designed, modeled and analyzed using finite element analysis (FEA) for PETG, ASA and PC. The designs were fabricated, field tested and economically analyzed. The highest stress was observed in U-shaped spacer for spacer (4.53 MPa – PC material), bolt (32.01 MPa – PETG material) and frame (37.30 MPa) and for washer in the H-spacer (42.77 MPa). Mises stresses for all designs, however, are found within allowable limits qualifying the clamping technique to be adopted for future installations. Financial analysis of the clamps found up to 66 % savings for the solutions. The T-shaped clamp is the recommended mounting technique with the lowest stresses while square spacer provides the least cost. The practical implications of the results indicate that 3D printing could provide an economic means of mounting PV modules and reducing solar energy costs.
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
If the library membership card is not in the list,
add a new one.
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|
Source: Personal bibliographies
and: SICRIS
The material is available in full text. If you wish to order the material anyway, click the Continue button.