VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
The dominant effect of temperature on the fatigue behaviour of polymer gearsKalin, Mitjan ; Kupec, AljaThe testing procedures and reported tribological performance of polymer gears, which are seeing ever-increasing use by industry, still lack consistency and detail. One of the key parameters that ... affect a polymer's mechanical properties, interface contact conditions and, consequently, the wear and fatigue behaviour, is the temperature. Temperature is well known to have a critical influence on all polymers, much more so than on metals or other materials. However, the temperatures - even for the same load and velocity - vary greatly with testing devices, gear sizes and shapes, surrounding environment, as do the cooling and heating rates. Moreover, the temperature, either root, flank or bulk, also varies with the operating conditions, meaning that even in the same S-N curve data at different stresses we actually obtain different temperatures. This suggests that the results from different tests and even different load levels, which are not temperature controlled, cannot be directly compared due to the important influence of the temperature on the polymers. This work presents the results of POM gears tested against steel gears under well-controlled temperature conditions, providing various S-N curves obtained at 30 °C, 50 °C and 70 °C that were kept constant at the gear root for three torque values (1.0 N m, 1.2 N m and 1.4 N m), and these are compared to data obtained under conditions that are typically considered to be "room temperature", which is in fact an uncontrolled temperature. The results confirm the important effect of the temperature on the fatigue life of POM gears, i.e., when kept at low temperature (30 °C), the fatigue life of POM gears is greatly improved.Vir: Wear. - ISSN 0043-1648 (Vol. 376/377, Part B, Apr. 2017, str. 1339-1346)Vrsta gradiva - članek, sestavni delLeto - 2017Jezik - angleškiCOBISS.SI-ID - 15897115
Avtor
Kalin, Mitjan |
Kupec, Alja
Teme
SiC/SiC-WC kompoziti |
recipročno drsenje |
obraba |
temperatura |
polyacetal |
polymer gear |
temperature |
fatigue
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Kalin, Mitjan | 14556 |
Kupec, Alja | 31064 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: