-
A study for the nanofinishing of an EN-31 workpiece with pulse DC power supply using ball-end magnetorheological finishingSingh, Himmat ; Niranjan, M. S. ; Wattal, ReetaBall-end magnetorheological finishing (BEMRF) is a high-level nanofinishing process used in finishing different kinds of surfaces including flat, 2- and 3-dimensional, and curved surfaces. In the ... present study, a pulse DC power supply is used to energize the electromagnet of magnetorheological (MR) finishing tool. The experiments have been conducted on EN-31 flat workpiece surface with and without pulse DC power supply using a magnetizing current (MC) 2.5 A, a working gap (WG) of 1.5 mm and a rotational speed of the tool (RST) of 500 rpm with a feed rate of workpiece of 50 mm/min. The study has been carried out to analyse the effect of the duty cycle on the response percentage reduction in surface roughness. It has been observed that an improved response percentage reduction in surface roughness has been found with pulsating DC power supply as compared to the response percentage reduction in surface roughness obtained with DC power supply without pulse at the same process parameters. After conducting the preliminary experiments, the statistical analysis was done to analyse the effect of various process parameters on the response percentage reduction in surface roughness using response surface methodology (RSM) at 0.16 duty cycle.Vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 66, no. 7/8, Jul.-Aug. 2020, str. 449-457)Vrsta gradiva - članek, sestavni delLeto - 2020Jezik - angleškiCOBISS.SI-ID - 27969283
Avtor
Singh, Himmat |
Niranjan, M. S. |
Wattal, Reeta
Teme
BEMRF |
pulse DC power supply |
duty cycle |
response percentage reduction in surface roughness |
magnetoreološka obdelava z okroglo delovno površino |
impulzni enosmerni napajalnik |
intermitenca |
odstotno zmanjšanje površinske hrapavosti |
impulzna magnetoreološka obdelava z okroglo delovno površino |
metodologija odzivne površine
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Singh, Himmat | |
Niranjan, M. S. | |
Wattal, Reeta |
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Obvestilo
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Mesto prevzema | Status gradiva | Rezervacija |
---|
Prosimo, počakajte trenutek.