UNI-MB - logo
UMNIK - logo
 
Fakulteta za strojništvo, Ljubljana (FSLJ)
PDF
  • Calibration of advanced yield criteria using uniaxial and heterogeneous tensile test data [Elektronski vir]
    Maček, Andraž, 1994- ...
    Conventionally, plastic anisotropy is calibrated by using standard uniaxial tensile and biaxial test results. Alternatively, heterogeneous strain field specimens in combination with full-field ... measurements can be used for this purpose. As reported by the literature, such an approach reduces the number of required tests enormously, but it is challenging to obtain reliable results. This paper presents an alternative methodology, which represents a compromise between the conventional and heterogeneous strain field calibration technique. The idea of the method is to use simple tests, which can be conducted on the uniaxial testing machine, and to avoid the use of advanced measuring equipment. The procedure is accomplished by conducting standard tensile tests, which are simple and reliable, and by a novel heterogeneous strain field tensile test, to calibrate the biaxial stress state. Moreover, only two of the parameters required for full characterisation need to be inversely identified from the test response; the other parameters are directly determined from the uniaxial tensile test results. This way, a dimension of optimization space is reduced substantially, which increases the robustness and effectiveness of the optimization algorithm.
    Vir: Metals [Elektronski vir]. - ISSN 2075-4701 (iss. 4, Vol. 10, 2020, str. 1-17)
    Vrsta gradiva - e-članek ; neleposlovje za odrasle
    Leto - 2020
    Jezik - angleški
    COBISS.SI-ID - 17170459

    Povezava(-e):

    https://www.mdpi.com/2075-4701/10/4/542
    Repozitorij Univerze v Ljubljani – RUL
    DOI

Vnos na polico