Knjižnica tehniških fakultet, Maribor (KTFMB)
-
Mathematical modeling of the melt cooling rate in the melt-spinning processKarpe, Blaž ...Rapid solidification of metallic melts is important for the development of the advance metallic materials, because enables the production of new alloys with superior properties according to ... conventionally treated alloys. In practice it turned out, that single roll melt spinning process has one of the highest melt cooling rates among all continuous casting processes. But, because very short solidification time and movement of the melt and substrate, melt cooling rate is very difficult to measure with confidence. Primary goal of our work was to determine the limits of cooling rate over the ribbon thickness and to outline, which property or typical feature of the process has the greatest influence on cooling rate of the melt. On the basis of developed mathematical model, a computer program was made and used for melt cooling rate calculation in the melt-spinning process.Our calculations show that distance from the contact surface in relation to the thermal properties of the melt, chilling wheel material and contact resistance between metal melt and chilling wheel have the greatest influence on melt/ribbon cooling rate. In the case of continuous casting, significant long term surface temperature increase may take place, if the wheel is not internally cooled. Comparison between cooling rates calculated at various thermal resistance assumptions of particular constituents is outlined. New method for determining contact resistance through variable heat transfer coefficient is introduced which takes into account physical properties of the casting material, process parameters and contact time/length between metal melt/ribbon and substrate and enables cooling rate prediction before the experiment execution.Vir: Proceedings (Str. 447-452)Vrsta gradiva - prispevek na konferenciLeto - 2012Jezik - angleškiCOBISS.SI-ID - 1239647
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Karpe, Blaž | 24489 |
Kosec, Borut | 11624 |
Gojić, Mirko | ![]() |
Anžel, Ivan, inženir metalurgije in materialov | 10369 |
Kitak, Sonja | ![]() |
Bizjak, Milan, 1955- | 06073 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: