UNI-MB - logo
UMNIK - logo
 
Knjižnica tehniških fakultet, Maribor (KTFMB)
  • Directional solidification of the eutectic Pb-Sn (61,9% wt Sn) alloy at different growth rates
    Brunčko, Mihael ; Anžel, Ivan, inženir metalurgije in materialov ; Križman, Alojz
    In this peper we present the influence of growth rate V on the microstructural changes in the directionally solidified eutectic Pb-Sn (12,9% wt Sn) alloy. The Pb-Sn eutectic alloy was solidified at ... different pulling velocities (of samples being removed from the heating zone) at a constant temperature gradient on a laboratory directional solidification device (Bridgman type furnace). The monitoring of the growth rate V and the temperature gradient G was performed with thermocouples placed inside of the samples and with electrical resistance measurements. The results of our investigation show that the lamellar spacing [lambda] decreases with the increasing growth rate V, and that the microstructure of the eutectic Pb-Sn alloy changes progressively from regular lamellar to degenerate rod-like morphology.
    Vir: Fortschritte in der Metallographie : Berichte der 11. Internationalen Metallographie-Tagung, Leoben, 11. bis 13. September 2002 (Str. 275-282)
    Vrsta gradiva - prispevek na konferenci
    Leto - 2003
    Jezik - angleški
    COBISS.SI-ID - 7813142

Vnos na polico