-
The properties of the shape memory alloys CuAlNi after continuous casting = Svojstva CuAlNi legure s prisjetlivosti oblika nakon kontinuiranog lijevanja [Elektronski vir]Gojić, Mirko ...In this work the results of microstructure and phase transformation of the Cu-Al-Ni shape memory alloy (SMA) were presented. The alloy was tested by optical microscopy, scanning electron microscopy ... and the differential scanningcalorimetry (DSC) methods. Also the hardness was measured. Samples foranaysis are obtained using an induction melting in the vacuum furnace. Remelted alloy is continuous casted by means of vertical device for casting inthe cylindic rods with diameter of 16 mm at the different speed of casting (255-625 mm/min.). After cooling of the alloy the martensite phase, primarly as the needle-like into grains, was observed. The columnar structure is presented near the outer surface of samples. The As, Af, Ms and Mf temperatures are determined by DSC method. It was found that, if the speed of casting rises than the grain size decreases. Also, the average grain diameter at the external surface and into the center are different. It was found that the average grain diameter near to the external surface was 489-229 um, while into the center it was 212-182 um.Vir: Innovative materials and advanced concepts of metal casting production [Elektronski vir] : proceedings book (8 str.)Vrsta gradiva - prispevek na konferenciLeto - 2009Jezik - angleškiCOBISS.SI-ID - 941663
Avtor
Gojić, Mirko |
Matković, Prosper |
Matković, Tatjana |
Kneissl, Albert C. |
Anžel, Ivan, inženir metalurgije in materialov |
Lojen, Gorazd |
Bizjak, Milan, 1955- |
Kosec, Borut
Teme
shape memory alloys |
microstructure |
martensite |
hardness |
phase transformation |
continuous casting |
Cu-Al-Ni |
litje |
zlitine |
kontinuirno litje |
preiskava materiala |
martenziti |
fazne spremembe |
mikrostruktura
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Gojić, Mirko | |
Matković, Prosper | |
Matković, Tatjana | |
Kneissl, Albert C. | |
Anžel, Ivan, inženir metalurgije in materialov | 10369 |
Lojen, Gorazd | 11951 |
Bizjak, Milan, 1955- | 06073 |
Kosec, Borut | 11624 |
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Obvestilo
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Mesto prevzema | Status gradiva | Rezervacija |
---|
Prosimo, počakajte trenutek.