Narodna in univerzitetna knjižnica, Ljubljana (NUK)
-
Operation of waste-to-energy-plant optimisations by using design explorationKapitler, Miran ; Samec, Niko ; Kokalj, FilipNowadays, a part of Municipal Solid Waste (MSW) of higher calorific value is usually used as a fuel in Waste-To-Energy-Plant (WTEP) which uses bed combustion process in a grate furnace. The ... properties and structure of MSW are very variable, so the complete combustion and emissions on the reasonable level are often very hard to achieve. The Computational Fluid Dynamics (CFD) with different CFD codes is often used to analyse the situation in the WTEP. In this paper, the CFD simulation within ANSYS 13.0 software package and in WORKBENCH 2.0 environment is used and supplementary optimisationćs methods are employed by using design explorer approach to achieve the target - optimised values of the input and output parameters which have been defined in order to indicate the complete combustion in the furnace. Furthermore, input and output parameters interaction can be found and presented and measured. On this basis, the optimal operating conditions and optimal combustion chamber dimensions are established through decision support systems in order to assure the complete combustion process with minimal emissions on the environment. Moreover, these requirements should be taken into account to enhance the operation conditions in the existing furnace or in research, development or project phase. In this way, the costs and time in these activities can be reduced. This approach has benefits because it can be used in other furnaces which use other fuels such as biomass, waste-oils or coal.Vir: Advances in production engineering & management. - ISSN 1854-6250 (Vol. 7, no. 2, Jun. 2012, str. 101-112)Vrsta gradiva - članek, sestavni delLeto - 2012Jezik - angleškiCOBISS.SI-ID - 16149526
vir: Advances in production engineering & management. - ISSN 1854-6250 (Vol. 7, no. 2, Jun. 2012, str. 101-112)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Kapitler, Miran | 33513 |
Samec, Niko | 13470 |
Kokalj, Filip | 21377 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema:
Naročanje gradiva za izposojo v čitalnice
Naročanje kopij člankov
Urnik dostave gradiva z oznako DS v signaturi