The emergence of Coronavirus disease 2019 (COVID-19) has affected health-care workers' psychological and mental health. Few studies have been conducted examining the psychological effect of COVID-19 ...on health-care worker psychological health in Jordan. Therefore, the present study aims to assess the respective levels of fear, anxiety, depression, stress, social support, and the associated factors, experienced by Jordanian health-care workers during the COVID-19 Pandemic. This study adopted a cross-sectional, correlational design to collect data from 365 health-care workers in Amman, Jordan, from August 16th to 23rd, 2020. Along with collecting sociodemographic characteristics, the Fear of COVID-19 Scale, the Depression, Anxiety, Stress Scale, and the Multidimensional Scale of Perceived Social Support electronically administered to participants. The majority of the participants (69.3%) were registered nurses. The mean overall score for the Fear of COVID-19 scale was 23.64 (SD + 6.85) which again exceeded the mid-point for the total score range (21), indicating elevated level fear of the COVID-19 pandemic. Participants had displayed extremely severe depression 40%, extremely severe anxiety 60%, and 35% severely distressed. Scores for depression (21.30 ± 10.86), anxiety (20.37 ± 10.80), stress (23.33 ± 10.87) were also high. Factors determined to be associated with psychological distress were being male, married, aged 40 years and older, and having more clinical experience. Assessment of social support indicated moderate-to-high levels of perceived support for all dimensions (significant other: 5.17 ± 1.28, family: 5.03 ± 1.30, friends: 5.05 ± 1.30). Weak significant correlations were found between social support and the other study variables (r < 0.22), indicating a weak association with fear, depression, anxiety, and stress, respectively. Overall, Jordanian health-care workers sample reported fear, depression, anxiety, and stress. The associated factors were being male, married, aged 40 years and older, and having more clinical experience. Regarding social support, participants primarily relied on support from their families, followed by support from friends.
Genome editing techniques are being used to modify plant breeding, which might increase food production sustainably by 2050. A product made feasible by genome editing is becoming better known, ...because of looser regulation and widespread acceptance. The world's population and food supply would never have increased proportionally under current farming practices. The development of plants and food production has been greatly impacted by global warming and climate change. Therefore, minimizing these effects is crucial for agricultural production that is sustainable. Crops are becoming more resilient to abiotic stress because of sophisticated agricultural practices and a better understanding of the abiotic stress response mechanism. Both conventional and molecular breeding techniques have been used to create viable crop types both processes are time-consuming. Recently, plant breeders have shown an interest in genome editing approaches for genetic manipulation that use clustered regularly interspaced short palindromic repeats (CRISPR/Cas9). To ensure the security of the food supply in the future, plant kinds with desired traits must be developed. A completely new era in plant breeding has begun because of the revolution in genome editing techniques based on the CRISPR/CRISPR-associated nuclease (Cas9) systems. All plants may effectively target a particular gene or group of loci using Cas9 and single-guide RNA (sgRNA). CRISPR/Cas9 can thereby save time and labor compared to conventional breeding methods. An easy, quick, and efficient method for directly altering the genetic sequences in cells is with the CRISPR and Cas9 systems. The CRISPR-Cas9 system, which was developed from components of the earliest known bacterial immune system, allows for targeted gene breakage and gene editing in a variety of cells/RNA sequences to guide endonuclease cleavage specificity in the CRISPR-Cas9 system. Editing can be directed to practically any genomic site by altering the guide RNA (gRNA) sequence and delivering it to a target cell along with the Cas9 endonuclease. We summarize recent CRISPR/Cas9 plant research findings, investigate potential applications in plant breeding, and make predictions about likely future breakthroughs and approaches to food security through 2050.
Abstract The objective of the present study was to assess the neuroprotective role of rutin (vitamin P) and delineate the mechanism of action. Recent evidence indicates that rutin exhibits ...antioxidant potential and protects the brain against various oxidative stressors. More precisely, the aim of the present study was to examine the modulating impacts of rutin against cognitive deficits and oxidative damage in intracerebroventricular-streptozotocin (ICV-STZ)–infused rats. Rats were injected bilaterally with ICV-STZ (3 mg/kg), whereas sham rats received the same volume of vehicle. After 2 weeks of streptozotocin (STZ) infusion, rats were tested for cognitive performance using Morris water maze tasks and thereafter euthanized for further biochemical, histopathological, and immunohistochemical studies. Rutin pretreatment (25 mg/kg, orally, once daily for 3 weeks) significantly attenuated thiobarbituric acid reactive substances (TBARS), activity of poly ADP-ribosyl polymerase, and nitrite level and decreased level of reduced glutathione (GSH) and activities of its dependent enzymes (glutathione peroxidase GPx and glutathione reductase GR) and catalase in the hippocampus of ICV-STZ rats. ICV-STZ rats showed significant cognitive deficits, which was improved significantly by rutin supplementation. The results indicate that rutin attenuates STZ-induced inflammation by reducing the expression of cyclooxygenase-2 (COX-2), glial fibrillary acidic protein (GFAP), interleukin-8 (IL-8), inducible nitric oxide synthase (iNOS), nuclear factor-kB, and preventing the morphological changes in hippocampus. The study thereby suggests the effectiveness of rutin in preventing cognitive deficits and might be beneficial for the treatment of sporadic dementia of Alzheimer type (SDAT).
Summary
Chronic urticaria (CU) affects about 1% of the world population of all ages, mostly young and middle‐aged women. It usually lasts for several years (> 1 year in 25–75% of patients) and often ...takes > 1 year before effective management is implemented. It presents as chronic spontaneous urticaria (CSU), chronic inducible urticaria (CIndU) or both in the same person. More than 25% of cases are resistant to H1‐antihistamines, even at higher doses, and third‐ and fourth‐line therapies (omalizumab and ciclosporin) control the disease only in two‐thirds of H1‐antihistamine‐resistant patients. Here we review the impact of CU on different aspects of patients’ quality of life and the burden of this chronic disease for the patient and society. CU may have a strong impact on health‐related quality of life (HRQoL), particularly when CSU is associated with angio‐oedema and/or CIndU (Dermatology Life Quality Index > 10 in 30% of patients). Comorbidities, such as anxiety and depression, which are present in more than 30% of patients with CSU, compound HRQoL impairment. Severe pruritus and the unpredictable occurrence of weals and angio‐oedema are responsible for sleep disorders; sexual dysfunction; limitations on daily life, work and sports activities; interfering with life within the family and in society; and patients’ performance at school and work (6% absenteeism and 25% presenteeism). Apart from treatment costs, with annual values between 900 and 2400 purchasing power parity dollars (PPP$) in Europe and the USA, CU is associated with a high consumption of medical resources and other indirect costs, which may reach a total annual cost of PPP$ 15 550.
Plain language summary available online
Purpose
This in vitro study evaluated the flexural strength, impact strength, hardness, and surface roughness of 3D‐printed denture base resin subjected to thermal cycling treatment.
Materials and ...Methods
According to ISO 20795‐1:2013 standards, 120 acrylic resin specimens (40/flexural strength test, 40/impact strength, and 40/surface roughness and hardness test, n = 10) were fabricated and distributed into two groups: heat‐polymerized; (Major.Base.20) as control and 3D‐printed (NextDent) as experimental group. Half of the specimens of each group were subjected to 10,000 thermal cycles of 5 to 55°C simulating 1 year of clinical use. Flexural strength (MPa), impact strength (KJ/m2), hardness (VHN), and surface roughness (μm) were measured using universal testing machine, Charpy's impact tester, Vickers hardness tester, and profilometer, respectively. Data were analyzed by ANOVA and Tukey honestly significant difference (HSD) test (α = 0.05).
Results
The values of flexural strength (MPa) were 86.63 ± 1.0 and 69.15 ± 0.88; impact strength (KJ/m2)—6.32 ± 0.50 and 2.44 ± 0.31; hardness (VHN)—41.63 ± 2.03 and 34.62 ± 2.1; and surface roughness (μm)—0.18 ± 0.01 and 0.12 ± 0.02 for heat‐polymerized and 3D‐printed denture base materials, respectively. Significant differences in all tested properties were recorded between heat‐polymerized and 3D‐printed denture base materials (P < 0.001). Thermal cycling significantly lowered the flexural strength (63.93 ± 1.54 MPa), impact strength (2.40 ± 0.35 KJ/m2), and hardness (30.17 ± 1.38 VHN) of 3D‐printed resin in comparison to thermal cycled heat‐polymerized resin, but surface roughness showed non‐significant difference (p = 0.262).
Conclusion
3D‐printed resin had inferior flexural strength, impact strength, and hardness values than heat‐polymerized resin, but showed superior surface roughness. Temperature changes (thermal cycling) significantly reduced the hardness and flexural strength and increased surface roughness, but did not affect the impact strength.
Sol-gel technique is used to synthesize as-grown zinc oxide (ZnO) and iron-nickel (Fe-Ni) co-doped ZnO thin films deposited on glass substrates using dip coating technique. The structural properties ...and crystal imperfections of as-prepared thin films are investigated. We performed the structural analysis of films using X-ray diffraction (XRD). The XRD analysis reveal that the as-prepared films exhibit wurtzite structure. Furthermore, XRD-line profile analysis is performed to study the correlation between structural properties and imperfections of the nanocomposite thin films. The crystallite size and microstrains parameters are predicted using the Williamson-Hall method. We found that the crystallites size increases as the co-doped (Fe-Ni) concentration is increased. However, microstrains of the nanocomposite films decreases as (Fe-Ni) concentration is increased. The optical properties of the (Fe-Ni) co-doped nanocomposite films are investigated by performing UV-Vis (250 nm-700 nm) spectrophotometer measurements. We found that as the (Fe-Ni) concentration level is steadily increased, transmittance of the undoped ZnO thin films is decreased. Remarkably, refractive index of undoped ZnO thin films is found to exhibit values extending from 1.55 to1.88 that would increase as (Fe-Ni) concentration is increased.
Polyethylene oxide‐poly(3,4‐ethylenedioxythiophene) (PEO‐PEDOT) nanocomposite films ‐ incorporated with NiZnFeO4 nanoparticles (NPs) were deposited using a dip‐coating technique. X‐ray diffraction ...(XRD) analysis revealed peaks at 35.4, 43.2, 54.5, and 56.3° diffraction angles, corresponding to NiZnFeO4NPs diffraction planes of 311, 400, 422, and 511, respectively. The PEO‐PEDOT film exhibited a smooth amorphous nature with a sheet nanostructure behavior. The incorporation of NiZnFeO4NPs NPs into the PEO‐PEDOT nanocomposite films led to an increase in surface roughness and thermal stability. The nanocomposite films also exhibited sheet nanostructure behavior as observed by SEM micrographs. The bandgap energies of the films, as deduced from the Tauc plot, exhibited a monotonic decrease from 3.91 to 3.60 eV as the NiZnFeO4NPs concentration increased from 0 to 8 wt%. A mathematical model was formulated to predict the bandgap energies versus NiZnFeO4NPs concentration. Additionally, the electrical conductivity of the nanocomposite films increased monotonically from 0.46 to 1.30 mS cm−1 as the NiZnFeO4NPs concentration increased from 0 to 8 wt%, as determined by 4‐point probe. The observed correlation between the optical and electrical properties of the nanocomposite films indicates promising prospects for utilizing these materials in optoelectronic devices.
Characterizations of PEO‐PEDOT/NiZnFeO4 NPs nanocomposite films.
There is widespread use of incremental shuttle walking test (ISWT) to measure functional capacity in cardiac rehabilitation patients. Due to occasional physical space limitations, an incremental ...shuttle walking test on a treadmill (ISWT-T) was suggested as an alternative. Knowledge about the cardiopulmonary response between the two tests and the factors associated with the distance achieved in Phase IV cardiac rehabilitation is limited. Thus, the study aims to compare the cardiopulmonary response between ISWT and ISWT-T and investigate the factors associated with distance achieved in both tests. Thirteen participants (66.3 ± 7.3 years, 84.6% males) attending phase IV cardiac rehabilitation participated in repeated measures counterbalanced trials. Each participant performed one ISWT and one ISWT-T separated by seven days. Main outcome measures included peak heart rate (HR), systolic and diastolic blood pressure post-test, distance achieved, respiratory frequency, tidal volume (VT), minute ventilation, respiratory exchange ratio, peak oxygen uptake (VO
), and secondary outcome measures included height, weight, waist circumference (WC) leg length (LL). There were no significant differences in the cardiopulmonary responses between ISWT and ISWT-T except for VO
(25.4 ± 5.8 vs 23.7 ± 5.1, p = 0.05, respectively). Age and height were significantly correlated with distance achieved during ISWT, and ISWT-T age (r = - 0.72, vs. r = - 0.73, p ≤ 0.05, respectively), height (r = 0.68, vs. r = 0.68, p ≤ 0.05, respectively). LL was only correlated with distance achieved on ISWT-T (r = 0.59, p ≤ 0.05). These findings suggest a similar cardiopulmonary response between the two tests, but doing ISWT in the hallway evoked a higher metabolic demand than doing it on a treadmill. Additionally, distance achieved on both tests was related to height and inversely to age.
Decapping represents a critical control point in regulating expression of protein coding genes. Here, we demonstrate that decapping also modulates expression of long noncoding RNAs (lncRNAs). ...Specifically, levels of >100 lncRNAs in yeast are controlled by decapping and are degraded by a pathway that occurs independent of decapping regulators. We find many lncRNAs degraded by DCP2 are expressed proximal to inducible genes. Of these, we show several genes required for galactose utilization are associated with lncRNAs that have expression patterns inversely correlated with their mRNA counterpart. Moreover, decapping of these lncRNAs is critical for rapid and robust induction of GAL gene expression. Failure to destabilize a lncRNA known to exert repressive histone modifications results in perpetuation of a repressive chromatin state that contributes to reduced plasticity of gene activation. We propose that decapping and lncRNA degradation serve a vital role in transcriptional regulation specifically at inducible genes.
► lncRNAs are degraded by a DCP2-dependent decapping pathway ► Many lncRNAs targeted to decapping are associated with inducible gene loci ► Decapping of lncRNAs is required for robust activation of GAL gene expression ► lncRNA degradation contributes plasticity to gene regulatory mechanisms
PDF
