In this work we propose the use of isothermal thermogravimetry to evaluate the oxidative stability of a lipid and to evaluate how the glyceride composition affects the entire oxidative process, to ...quantify the oxidation undertaken by the lipid, and numerically compare the oxidative behaviour of different lipids. The innovative aspect of the present method lies in the acquisition of a prolonged "oxygen uptake" curve (4000-10,000 min) of a lipid under oxygen and in the development of a semi-empirical fitting equation for the experimental data. This provides the induction period (oxidative stability), and allows to evaluate the rate of oxidation, the rate and the magnitude of oxidative degradation, the overall mass loss and the mass of oxygen taken by the lipid upon time. The proposed approach is used to characterize the oxidation of different edible oils with different degrees of unsaturation (linseed oil, sunflower oil, and olive oil) as well as chemically simpler compounds used in the literature to model the autoxidation of vegetable oils and lipids in general: triglycerides (glyceryl trilinolenate, glyceryl trilinoleate and glyceryl trioleate) and methyl esters (methyl linoleate and methyl linolenate). The approach proves very robust and very sensitive to changes in the sample composition.
Carbon black-based particles are widely employed as pigment and they are known to slow down the drying time of oil paints. In this work, the effect of amorphous carbon black on the mechanism and ...speed of autoxidation of a polyunsaturated oil was investigated. Moreover, the effect of the addition of aluminium stearate and zinc stearate was studied. These are two common additives used in the artists’ paint industry to facilitate pigment dispersion. The curing of the oil paints with and without the addition of the two stearates at 80 °C under airflow was followed by isothermal Thermogravimetry. The oxygen uptake profiles were fitted by a semi-empiric equation to comparatively study the kinetics of the oil oxidation and estimate oxidative degradation. Moreover, model paintings were left to cure at ambient conditions and Differential Scanning Calorimetry was then used to monitor their curing progress over time and to evaluate the stability of peroxides formed in the paint layers. Gas Chromatography–Mass Spectrometry was performed at 7 and 12 months of natural ageing of the model paintings, to investigate the non-covalently cross-linked fractions. Analytical Pyrolysis coupled with Gas Chromatography–Mass Spectrometry was used to characterise the whole organic fraction of the model paintings, including the cross-linked network. Amorphous carbon has an antioxidant effect and inhibits the radical chain propagation. The presence of aluminium and zinc stearates in the black paint affects the autoxidation process, by leading, in the first months, to a faster consumption of unsaturated moieties, and, accordingly, to accelerate and increase peroxides formation. After a few months though, the whole curing slows down, and active peroxides and radicals are still present even after 12 months.
Lewis/Brønsted acidic deep eutectic solvents (LBDESs) are a recent class of solvents that combine the two types of acidity. In some cases, this synergy leads to enhanced catalytic properties for many ...reactions and applications. For this reason, it is important to discover more LBDESs. In this work, we prepared and characterized four different zinc(II)-based LBDESs, mixing ZnCl
and various Brønsted acids: acetic, glycolic, levulinic, and formic acids. Apart from the latter, for which the corresponding DES is not thermally stable, the samples have been characterized in terms of density, viscosity, and conductivity. Notably, as zinc(II) is a diamagnetic metal, all of them are suitable for NMR spectroscopy, for example, for kinetic and mechanistic studies.
Green chemistry emphasizes the isolation of biologically active compounds from plants and biomass to produce renewable, bio-based products and materials through sustainability and circularity-driven ...innovation processes. In this work, we have investigated the extraction of rosmarinic acid (RA), a phenolic acid with several biological properties, from aromatic herbs using ultrasounds and low environmental risk natural deep eutectic solvents (NADES). Various solvent mixtures have been investigated, and the parameters influencing the process have been studied by a mixture-process experimental design to identify the optimal RA extraction conditions. The extraction yield has been calculated by HPLC-diode array analysis. The lactic acid:ethylene glycol mixture using an ultrasound-assisted process has been found to be the most versatile solvent system, giving RA yields 127-160% higher than hydroalcoholic extraction (70% ethanol). The deep eutectic solvent nature of lactic acid:ethylene glycol has been demonstrated for the first time by multi-technique characterization (
H-NMR and
C-NMR, DSC, and W absorption properties). The aqueous raw extract has been directly incorporated into poly(vinyl alcohol) to obtain films with potential antibacterial properties for applications in the field of food and pharmaceutical packaging.
Poultry feathers are among the most abundant and polluting keratin-rich waste biomasses. In this work, we developed a one-pot microwave-assisted process for eco-friendly keratin extraction from ...poultry feathers followed by a direct electrospinning (ES) of the raw extract, without further purification, to obtain keratin-based bioplastics. This microwave-assisted keratin extraction (MAE) was conducted in acetic acid 70% v/v. The effects of extraction time, solvent/feathers ratio, and heating mode (MAE vs. conventional heating) on the extraction yield were investigated. The highest keratin yield (26 ± 1% w/w with respect to initial feathers) was obtained after 5 h of MAE. Waste-derived keratin were blended with gelatin to fabricate keratin-based biodegradable and biocompatible bioplastics via ES, using 3-(Glycidyloxypropyl)trimethoxysilane (GPTMS) as a cross-linking agent. A full characterization of their thermal, mechanical, and barrier properties was performed by differential scanning calorimetry, thermogravimetric analysis, uniaxial tensile tests, and water permeability measurements. Their morphology and protein structure were investigated using scanning electron microscopy and attenuated total reflection-infrared spectroscopy. All these characterizations highlighted that the properties of the keratin-based bioplastics can be modulated by changing keratin and GPTMS concentrations. These bioplastics could be applied in areas such as bio-packaging and filtration/purification membranes.
This paper presents the results obtained from the thermal analysis of a set of geomaterials (clays, pyroclastic materials, and industrial recycled materials) to be used as raw materials for the ...synthesis of geopolymers, specifically designed for the conservation of Cultural Heritage (CH) buildings, particularly in seismic hazard zones such as Sicily. X-ray diffraction and gas volumetric analysis (calcimetry) were applied to this set of raw materials in order to characterize the materials from the chemical and structural point of view. Thermogravimetric analysis (TG), TG coupled to Fourier transform infrared spectroscopy (TG-FTIR), and differential scanning calorimetry were used to characterize their thermal behavior. The statistical treatment of the thermogravimetric data by principal component analysis and hierarchical clustering analysis highlights the direct relation between the thermal data and the material composition that will be exploited for the selection of the best materials to obtain geopolymers specifically designed for the conservation of CH buildings.
Amphiphilic tetrafluorostyrene monomers (EFS8) carrying in the para position an oligoethylene glycol chain containing 8 oxyethylenic units on average were synthesized and used for preparation via ...activator regenerated by electron transfer atom transfer radical polymerization (ARGET-ATRP) of the corresponding amphiphilic homopolymers (pEFS8-x) with different degrees of polymerization (x = 26 and 46). Combining light transmittance and nano-differential scanning calorimetry (n-DSC) measurements revealed that pEFS8-x homopolymers displayed a lower critical solution temperature (LCST) thermoresponsive behavior in water solutions. Moreover, n-DSC measurements revealed the presence in heating scans of a broad endothermic peak ascribable to the dehydration process of the polymer single chains (unimers) and their collapse into aggregates. Consistently, dynamic light scattering (DLS) measurements showed below the LCST the presence of small nanostructures with a hydrodynamic diameter size Dh of 6–7 nm, which collapsed into concentration-dependent larger multichain aggregates (Dh = 300–3000 nm) above LCST. Interestingly, n-DSC data showed that the unimer-aggregate transition was reversible up to a specific temperature (Trev) of each homopolymer, which in any case was higher than Tmax. When heating above Trev the transition was no longer reversible, causing the shift of Tonset and Tmax at lower values, thus suggesting an increase in hydrophobicity of the polymer systems associated with a temperature-dependent dehydration process.
One of the main challenges of the interface-tissue engineering is the regeneration of diseased or damaged interfacial native tissues that are heterogeneous both in composition and in structure. In ...order to achieve this objective, innovative fabrication techniques have to be investigated. This work describes the design, fabrication, and validation of a novel mixing system to be integrated into a double-extruder bioprinter, based on an ultrasonic probe included into a mixing chamber. To validate the quality and the influence of mixing time, different nanohydroxyapatite–gelatin samples were printed. Mechanical characterization, micro-computed tomography, and thermogravimetric analysis were carried out. Samples obtained from three-dimensional bioprinting using the mixing chamber were compared to samples obtained by deposition of the same final solution obtained by manually operated ultrasound probe, showing no statistical differences. Results obtained from samples characterization allow to consider the proposed mixing system as a promising tool for the fabrication of graduated structures which are increasingly being used in interface-tissue engineering.
The biomass waste obtained at the end-of-pipe of the extraction industry can be used as fuel for energy production, aiming at cost reduction/waste disposal issues. However, few systematic ...investigations into the calorific value of these residues are reported in the literature. In this work, the thermochemical properties of solid residues from different biomasses (residues from citrus peels, leaves, flowers, stems, and poultry feathers used for extraction) as potential biomass fuels have been investigated. The heat of combustion (ΔcH) of the solid residues from citrus (orange, tangerine, lemon, grapefruit, and pomelo), aromatic herbs (rosemary, lavender, thyme, Artemisia vulgaris L. and Ruta chalepensis L.), and poultry feathers biomasses was measured by direct calorimetry. The results were compared with the higher heating values (HHV) calculated using the elemental (CHNOS) and thermogravimetric (TGA) analyses data and with the enthalpy of combustion calculated using the biomass composition predicted by FTIR spectroscopy in tandem with chemometrics. The calculated values match with the corresponding experimental values of ΔcH. The heat of combustion highlights the energetic features of solid residues for their potential uses as alternative biomass for energy production. This information is essential to evaluate the employment of solid residues as fossil fuel substitutes.
The global interest on microwave assisted chemistry (MAC) is due to the important benefits for the sustainable growth of green chemical industries and environmentally friendly progress of society. ...MAC has been firstly developed using oven-type microwaves (MWs) assisted reactors, which requires difficult and expensive industrial scale-up. In 2002, the development of coaxial dipole antenna allowed a direct application of MWs in situ in the reaction media, opening a crucial, novel versatile technological solution, making MW-assisted processes feasible in any configuration at any industrial level. Here, we present an overview of the technological development of 20 years research using a coaxial MW antenna for green chemistry and human health applications. The major MW technology breakthroughs described in these short-review are: i) MW-induced thermoablation machine, ii) in situ MW heating in open glassware chemical reactors, iii) electrodeless MW/ultraviolet (UV) lamps and photoreactors, iv) MW-high pressure reactor and v) solventless/simultaneous MW/UV/ultrasound (US) configurations. Applications for the synthesis of nanocatalysts, nanoparticles and polymers, advanced oxidative decomposition photochemical processes, solvothermal extraction of valuable products and biomass processing are discussed. Remarks on the scaling up of the extraction processes and frontier applications addressed to the treatment of current and future outbreak pandemic emergences are also shown.
Display omitted
•Novel coaxial microwave technology to apply microwave inside the reacting medium.•In-situ activation of the synthesis of nanoparticles.•Coaxial microwave technology for the extraction essential oils and proteins.•Combined microwave/ultrasound/ultraviolet irradiation technologies.•The coaxial microwave technology is scalable at industrial level.
PDF
