The evaluation of landslide specific risk, defined as the expected degree of loss due to landslides, requires the parameterization and the combination of a number of socio-economic and geological ...factors, which often needs the interaction of different skills and expertise (geologists, engineers, planners, administrators, etc.). The specific risk sub-components, i.e., hazard and vulnerability of elements at risk, can be determined with different levels of detail depending on the available auxiliary data and knowledge of the territory. These risk factors are subject to short-term variations and nowadays turn out to be easily mappable and evaluable through remotely sensed data and GIS (Geographic Information System) tools. In this work, we propose a qualitative approach at municipal scale for producing a “specific risk” map, supported by recent satellite PSI (Persistent Scatterer Interferometry) data derived from SENTINEL-1 C-band images in the spanning time 2014–2017, implemented in a GIS environment. In particular, PSI measurements are useful for the updating of a landslide inventory map of the area of interest and are exploited for the zonation map of the intensity of ground movements, needed for evaluating the vulnerability over the study area. Our procedure is presented throughout the application to the Volterra basin and the output map could be useful to support the local authorities with updated basic information required for environmental knowledge and planning at municipal level. Moreover, the proposed procedure is easily managed and repeatable in other case studies, as well as exploiting different SAR sensors in L- or X-band.
This work is focused on deformation activity mapping and monitoring using Sentinel-1 (S-1) data and the DInSAR (Differential Interferometric Synthetic Aperture Radar) technique. The main goal is to ...present a procedure to periodically update and assess the geohazard activity (volcanic activity, landslides and ground-subsidence) of a given area by exploiting the wide area coverage and the high coherence and temporal sampling (revisit time up to six days) provided by the S-1 satellites. The main products of the procedure are two updatable maps: the deformation activity map and the active deformation areas map. These maps present two different levels of information aimed at different levels of geohazard risk management, from a very simplified level of information to the classical deformation map based on SAR interferometry. The methodology has been successfully applied to La Gomera, Tenerife and Gran Canaria Islands (Canary Island archipelago). The main obtained results are discussed.
The potential use of the integration of PSI (Persistent Scatterer Interferometry) and GB-InSAR (Ground-based Synthetic Aperture Radar Interferometry) for landslide hazard mitigation was evaluated for ...mapping and monitoring activities of the San Fratello landslide (Sicily, Italy). Intense and exceptional rainfall events are the main factors that triggered several slope movements in the study area, which is susceptible to landslides, because of its steep slopes and silty–clayey sedimentary cover.
In the last three centuries, the town of San Fratello was affected by three large landslides, developed in different periods: the oldest one occurred in 1754, damaging the northeastern sector of the town; in 1922 a large landslide completely destroyed a wide area in the western hillside of the town. In this paper, the attention is focussed on the most recent landslide that occurred on 14 February 2010: in this case, the phenomenon produced the failure of a large sector of the eastern hillside, causing severe damages to buildings and infrastructures. In particular, several slow-moving rotational and translational slides occurred in the area, making it suitable to monitor ground instability through different InSAR techniques.
PS-InSAR™ (permanent scatterers SAR interferometry) techniques, using ERS-1/ERS-2, ENVISAT, RADARSAT-1, and COSMO-SkyMed SAR images, were applied to analyze ground displacements during pre- and post-event phases. Moreover, during the post-event phase in March 2010, a GB-InSAR system, able to acquire data continuously every 14min, was installed collecting ground displacement maps for a period of about three years, until March 2013. Through the integration of space-borne and ground-based data sets, ground deformation velocity maps were obtained, providing a more accurate delimitation of the February 2010 landslide boundary, with respect to the carried out traditional geomorphological field survey. The integration of GB-InSAR and PSI techniques proved to be very effective in landslide mapping in the San Fratello test site, representing a valid scientific support for local authorities and decision makers during the post-emergency management.
•We analyze slope instability phenomena in San Fratello (Sicily, Italy).•We analyze PSI data using different sensors, acquired from 1992 to 2012.•GB-SAR data were used to monitor the landslide occurred in the 2010.•Satellite and GB data were integrated to update the 2010 landslide boundary.
Display omitted
•The efficiency of Sentinel-1 based continuous monitoring services was demonstrated.•Anomalies, i.e., changes in the deformation trend, are coupled with several factors.•1788, 598 and ...3665 anomalies for Tuscany, VdA and Veneto had a cause assigned.•The highest percentage of anomalies identified is due to slope instability.•Different distribution of the anomalies is linked to different regional settings.
In Italy, three different operational continuous monitoring experiences based on the exploitation of Multi Temporal Synthetic Aperture Radar data (MTInSAR) Sentinel-1 data are here depicted, and the results obtained in one year have been analysed. Tuscany region (Central Italy) has been the first region to implement such service, followed by Valle d’Aosta and Veneto regions (North-West and North-East Italy, respectively). In detail, the services benefit from regularly updated deformation maps (every 12 days) to promptly detect anomalies of deformation, i.e., trend variations in the time series of displacement. In this work, anomalies detected between September 2019 and September 2020 are thus correlated with several types of factors, either related to the environment, intrinsic of the data or derived from ancillary data. A statistical analysis has been performed on the three regions, and are discretized into five macro-areas, namely: i) spatial and temporal statistics, related to the geographic setting and the temporal distribution of the anomalies; ii) parametric, i.e., related to the interferometric processing; iii) triggering factors; iv) environmental and geological factors; v) urban setting. The results derived from the analysis of this work show the obvious differences between the three regions, highlighting distinct distributions of the anomalies according to the different settings of each study area. Furthermore, results were analyzed, to provide a summary of the main findings obtained, giving a first evaluation of the services and hypothesizing future further improvements and applications.
Underground mining is one of the human activities with the highest impact in terms of induced ground motion. The excavation of the mining levels creates pillars, rooms and cavities that can evolve in ...chimney collapses and sinkholes. This is a major threat where the mining activity is carried out in an urban context. Thus, there is a clear need for tools and instruments able to precisely quantify mining-induced deformation. Topographic measurements certainly offer very high spatial accuracy and temporal repeatability, but they lack in spatial distribution of measurement points. In the past decades, Multi-Temporal Satellite Interferometry (MTInSAR) has become one of the most reliable techniques for monitoring ground motion, including mining-induced deformation. Although with well-known limitations when high deformation rates and frequently changing land surfaces are involved, MTInSAR has been exploited to evaluate the surface motion in several mining area worldwide. In this paper, a detailed scale MTInSAR approach was designed to characterize ground deformation in the salt solution mining area of Saline di Volterra (Tuscany Region, central Italy). This mining activity has a relevant environmental impact, depleting the water resource and inducing ground motion; sinkholes are a common consequence. The MTInSAR processing approach is based on the direct integration of interferograms derived from Sentinel-1 images and on the phase splitting between low (LF) and high (HF) frequency components. Phase unwrapping is performed for the LF and HF components on a set of points selected through a “triplets closure” method. The final deformation map is derived by combining again the components to avoid error accumulation and by applying a classical atmospheric phase filtering to remove the remaining low frequency signal. The results obtained reveal the presence of several subsidence bowls, sometimes corresponding to sinkholes formed in the recent past. Very high deformation rates, up to −250 mm/yr, and time series with clear trend changes are registered. In addition, the spatial and temporal distribution of velocities and time series is analyzed, with a focus on the correlation with sinkhole occurrence.
The use of InSAR (Interferometric Synthetic Aperture Radar) products has greatly increased in the last years because of the technological advances in terms of both acquisition sensors and processing ...algorithms. The development of multi-interferogram techniques and the availability of free SAR analysis tools has significantly increased the number of worldwide applications of satellite measurements for mapping and monitoring geohazards. InSAR techniques excel in determining ground deformation in urban areas, where the coherence of the radar images is high, and the obtainable results are particularly reliable. Thus, measuring urban subsidence has always been one of the main targets of the InSAR analysis. In this paper, we present a brief review on the applications, in the last decades, of both single and multi-interferogram techniques to monitor ground lowering in urban areas along the Italian Peninsula. Because of its geological context, Italy is prone to slow natural subsidence phenomena sometimes aggravated and accelerated, especially along the coasts and in urbanized areas, by anthropogenic factors (i.e., groundwater overexploitation, consolidation in recent urban expansion, geothermal activities). The review will show how the interferometric data allowed the scientific community to increase the knowledge of the phenomena, map their spatial distribution, and reconstruct their temporal evolution. The final goal of the review is to demonstrate the added value of InSAR data in supporting groundwater management and urban development in Italy.
In this manuscript, an integrated strategy that exploits both phase and amplitude features of satellite SAR (synthetic aperture radar) images and ground data is proposed for deriving the deformation ...field induced by a complex landslide that affected part of the village of Ponzano (Abruzzi Region, Central Italy). The February 12, 2017, landslide was triggered by the combined effects of intense rainfalls and snowmelt that saturated the slope. The SqueeSAR algorithm was applied to two C-band SAR datasets, composed by Radarsat-2 and Sentinel-1 images, spanning a nine-year time interval before the landslide occurrence. Moreover, the amplitude information carried by two TerraSAR-X images, acquired immediately before and after the event, was exploited to derive the total displacement generated by the landslide movement by means of the RMT (rapid motion tracking) algorithm. The obtained results allow describing the landslide behavior before and after its failure. In particular, the back-monitoring analysis shows that the landslide was already slowly moving, with deformation rates increasing from the Radarsat-2 to the Sentinel-1 monitored periods, 10 years before its complete mobilization. The landslide failure of February 2017 produced maximum displacements of about 10 m in some sectors of the affected area. The registered deformation rates and the localization of the maximum displacements areas were confirmed by field data, collected during a field campaign and a helicopter recognizance of the damaged areas, both performed after the event.
The continuous monitoring of displacements occurring on the Earth surface by exploiting MTInSAR (Multi Temporal Interferometry SAR) Sentinel-1 data is a solid reality, as testified by the ongoing ...operational ground motion service in the Tuscany region (Central Italy). In this framework, anomalies of movement, i.e., accelerations or deceleration as seen by the time series of displacement of radar targets, are identified. In this work, a Machine Learning algorithm such as the Random Forest has been used to assess the probability of occurrence of the anomalies induced by slope instability and subsidence. About 20,000 anomalies (about 7000 and 13,000 for the slope instability and the subsidence, respectively) were collected between 2018 and 2020 and were used as input, while ten different variables were selected, five related to the morphological and geological setting of the study area and five to the radar characteristics of the data. The resulting maps may provide useful indications of where a sudden change of displacement trend may occur, analyzing the contribution of each factor. The cross-validation with the anomalies collected in a following timespan (2020–2021) and with official landslide and subsidence inventories provided by the regional authority has confirmed the reliability of the final maps. The adoption of a map for assessing the probability of the occurrence of MTInSAR anomalies may serve as an enhanced geohazard prevention measurement, to be periodically updated and refined in order to have the most precise knowledge possible of the territory.
Identification and classification of landslides is a preliminary and crucial work for landslide risk assessment and hazard mitigation. The exploitation of surface deformation velocity derived from ...satellite synthetic aperture radar interferometry (InSAR) is a consolidated and suitable procedure for the recognition of active landslides over wide areas. However, the calculated displacement velocity from InSAR is one-dimensional motion along the satellite line of sight (LOS), representing a major hurdle for landslide type and failure mechanism classification. In this paper, different velocity datasets derived from both ascending and descending Sentinel-1 data are employed to analyze the surface ground movement of the Huangshui region (Northwestern China). With global warming, precipitation in the Huangshui region, geologically belonging to the loess basin in the eastern edge of Qing-Tibet Plateau, has been increasing, often triggering a large number of landslides, posing a potential threat to local citizens and natural and anthropic environments. After processing both SAR data geometries, the surface motion was decomposed to obtain the two-dimensional displacements (vertical and horizontal E–W). Thus, a classification criterion of the loess landslide types and failure mode is proposed, according to the analysis of deformation direction, velocities, texture, and topographic characteristics. With the support of high-resolution images acquired by remote sensing and unmanned aerial vehicle (UAV), 14 translational slides, seven rotational slides, and 10 loess flows were recognized in the study area. The derived results may provide solid support for stakeholders to comprehend the hazard of unstable slopes and to undertake specific precautions for moderate and slow slope movements.
In this paper a methodology is proposed to elaborate landslide activity maps through the use of PS (Persistent Scatterer) data. This is illustrated through the case study of Tramuntana Range in the ...island of Majorca (Spain), where ALOS (Advanced Land Observing Satellite) images have been processed through a Persistent Scatterer Interferometry (PSI) technique during the period of 2007–2010. The landslide activity map provides, for every monitored landslide, an assessment of the PS visibility according to the relief, land use, and satellite acquisition parameters. Landslide displacement measurements are projected along the steepest slope, in order to compare landslide velocities with different slope orientations. Additionally, a ground motion activity map is also generated, based on active PS clusters not included within any known landslide phenomenon, but even moving, potentially referred to unmapped landslides or triggered by other kinds of geomorphological processes. In the Tramuntana range, 42 landslides were identified as active, four as being potential to produce moderate damage, intersecting the road Ma-10, which represents the most important road of the island and, thus, the main element at risk. In order to attest the reliability of measured displacements to represent landslide dynamics, a confidence degree evaluation is proposed. In this test site, seven landslides exhibit a high confidence degree, medium for 93 of them, and low for 51. A low confidence degree was also attributed to 615 detected active clusters with a potential to cause moderate damage, as their mechanism of the triggering cause is unknown. From this total amount, 18 of them intersect the Ma-10, representing further potentially hazardous areas. The outcomes of this work reveal the usefulness of landslide activity maps for environmental planning activities, being exportable to other radar data and different geomorphological settings.
PDF
