Submicron beam synchrotron-based X-ray diffraction (XRD) techniques have been developed and used to accurately and nondestructively map chemical composition and material quality of selectively grown ...group III-nitride nanowires. GaN, AlGaN, and InGaN multi-quantum-well nanowires have been selectively grown on lattice matched and mismatched substrates, and the challenges associated with obtaining and interpreting submicron beam XRD results are addressed and solved. Nanoscale cathodoluminescence is used to examine exciton behavior, and energy-dispersive X-ray spectroscopy is used to verify chemical composition. Scanning transmission electron microscopy is later used to paint a more complete picture. The advantages of submicron beam XRD over other techniques are discussed in the context of this challenging material system.
► We used nano selective area growth to create nanowires of GaN, AlGaN and InGaN/GaN. ► We characterized them by synchrotron-based submicron beam X-ray diffraction (XRD). ► This technique accurately determined chemical and crystallographic properties. ► Challenges of XRD are addressed in the context of this challenging material system. ► Advantages of XRD over other characterization methods are discussed.
One of the central challenges of nanoscience is fabrication of nanoscale structures with well-controlled architectures using planar thin-film technology. Herein, we report that ordered ...nanocheckerboards in ZnMnGaO4 films were grown epitaxially on single-crystal MgO substrates by utilizing a solid-state method of the phase separation-induced self-assembly. The films consist of two types of chemically distinct and regularly spaced nanorods with mutually coherent interfaces, ∼4 × 4 × 750 nm3 in size and perfectly aligned along the film growth direction. Surprisingly, a significant in-plane strain, more than 2%, from the substrate is globally maintained over the entire film thickness of about 820 nm. The strain energy from Jahn−Teller distortions and the film−substrate lattice mismatch induce the coherent three-dimensional (3D) self-assembled nanostructure, relieving the volume strain energy while suppressing the formation of dislocations.
Lattice distortions (LD) in 4H-silicon carbide (SiC) wafers were quantified using synchrotron X-ray rocking curve mapping (RCM), and were resolved into their two components of lattice strain (Δd/d) ...and lattice plane curvature (LPC) for 150 mm diameter wafers. The evolution of these LDs were investigated for three sequential substrates from the same boule, one of which was the substrate reference, and the other two had a 10 µm thick, 1 × 1017 and 4 × 1014 cm-3 n-type doped epitaxial layer. The lattice strain, Δd/d, was highest for the lowest doped wafer due to higher mismatch with the substrate wafer. After epitaxial layer growth, the LPC variation across the wafer increases by a factor of 2, irrespective of doping. The LPC maps indicate presence of a twist in the lattice planes that increases after epitaxial growth. The LPC component has higher influence on wafer shape change, which can reduce device yields. The lattice strain component predominantly affects the glide of basal plane dislocations (BPDs), thereby reducing device reliability. From analysis of peak widths, it was determined that threading dislocations in the top 6 microns of the wafer increase after epitaxial layer growth.
We show that the r-mode instability can generate strong toroidal fields in the core of accreting millisecond quark stars by inducing differential rotation. We follow the spin frequency evolution on a ...long time-scale, taking into account the magnetic damping rate in the evolution equations of r-modes. The maximum spin frequency of the star is only marginally lower than without the magnetic field. The late-time evolution of the stars that enter the r-mode instability region is instead quite different if the generated magnetic fields are taken into account: they leave the millisecond pulsar region and become radio pulsars.