Correcting errors in real time is essential for reliable large-scale quantum computations. Realizing this high-level function requires a system capable of several low-level primitives, including ...single-qubit and two-qubit operations, midcircuit measurements of subsets of qubits, real-time processing of measurement outcomes, and the ability to condition subsequent gate operations on those measurements. In this work, we use a 10-qubit quantum charge-coupled device trapped-ion quantum computer to encode a single logical qubit using the 7,1,3 color code, first proposed by Steane Phys. Rev. Lett. 77, 793 (1996)PRLTAO0031-900710.1103/PhysRevLett.77.793. The logical qubit is initialized into the eigenstates of three mutually unbiased bases using an encoding circuit, and we measure an average logical state preparation and measurement (SPAM) error of 1.7(2)×10^{-3}, compared to the average physical SPAM error 2.4(4)×10^{-3} of our qubits. We then perform multiple syndrome measurements on the encoded qubit, using a real-time decoder to determine any necessary corrections that are done either as software updates to the Pauli frame or as physically applied gates. Moreover, these procedures are done repeatedly while maintaining coherence, demonstrating a dynamically protected logical qubit memory. Additionally, we demonstrate non-Clifford qubit operations by encoding a Tover ¯|+⟩_{L} magic state with an error rate below the threshold required for magic state distillation. Finally, we present system-level simulations that allow us to identify key hardware upgrades that may enable the system to reach the pseudothreshold.
Which mesh for hernia repair? Brown, C N; Finch, J G
Annals of the Royal College of Surgeons of England
92, Številka:
4
Journal Article
Recenzirano
Odprti dostop
The concept of using a mesh to repair hernias was introduced over 50 years ago. Mesh repair is now standard in most countries and widely accepted as superior to primary suture repair. As a result, ...there has been a rapid growth in the variety of meshes available and choosing the appropriate one can be difficult. This article outlines the general properties of meshes and factors to be considered when selecting one.
We performed a search of the medical literature from 1950 to 1 May 2009, as indexed by Medline, using the PubMed search engine (www.pubmed.gov). To capture all potentially relevant articles with the highest degree of sensitivity, the search terms were intentionally broad. We used the following terms: 'mesh, pore size, strength, recurrence, complications, lightweight, properties'. We also hand-searched the bibliographies of relevant articles and product literature to identify additional pertinent reports.
The most important properties of meshes were found to be the type of filament, tensile strength and porosity. These determine the weight of the mesh and its biocompatibility. The tensile strength required is much less than originally presumed and light-weight meshes are thought to be superior due to their increased flexibility and reduction in discomfort. Large pores are also associated with a reduced risk of infection and shrinkage. For meshes placed in the peritoneal cavity, consideration should also be given to the risk of adhesion formation. A variety of composite meshes have been promoted to address this, but none appears superior to the others. Finally, biomaterials such as acellular dermis have a place for use in infected fields but have yet to prove their worth in routine hernia repair.
We describe and benchmark a new quantum charge-coupled device (QCCD) trapped-ion quantum computer based on a linear trap with periodic boundary conditions, which resembles a race track. The new ...system successfully incorporates several technologies crucial to future scalability—including electrode broadcasting, multilayer rf routing, and magneto-optical trap (MOT) loading—while maintaining, and in some cases exceeding, the gate fidelities of previous QCCD systems. The system is initially operated with 32 qubits, but future upgrades will allow for more. We benchmark the performance of primitive operations, including an average state preparation and measurement error of 1.6(1)×10^{-3}, an average single-qubit gate infidelity of 2.5(3)×10^{-5}, and an average two-qubit gate infidelity of 1.84(5)×10^{-3}. The system-level performance of the quantum processor is assessed with mirror benchmarking, linear cross-entropy benchmarking, a quantum volume measurement of QV=2^{16}, and the creation of 32-qubit entanglement in a GHZ state. We also tested application benchmarks, including Hamiltonian simulation, QAOA, error correction on a repetition code, and dynamics simulations using qubit reuse. We also discuss future upgrades to the new system aimed at adding more qubits and capabilities.
A study of the mechanical response of Mg AZ31 when deformed under twinning dominated conditions is presented. In addition to the well-known rapid texture variation, neutron diffraction measurements ...reveal a ‘sense-reversal’ of the internal stress in the twinned grains. The latter is characterized experimentally and an elasto-plastic polycrystal model is extended in order to account for twin domain reorientation and associated stress relaxation. It is concluded that the texture variation due to twinning is sufficient to explain the observed macroscopic stress–strain response. However, the evolution of internal stresses in diffracting subsets of grains is complex and more challenging to explain. It seems to be strongly controlled by the order in which slip and twinning are activated, the stress relaxation associated with twin propagation, and neighbor constraint effects.
In situ neutron diffraction is used to assess the development of internal elastic strains within the grains of magnesium alloy AZ31 processed via conventional extrusion and equal channel angular ...extrusion. An elastoplastic self-consistent polycrystal model is used to simulate the macroscopic flow curves and internal strain developments within the distinctly textured magnesium alloy samples. The parameters of the model are the critical resolved shear strengths and hardening behaviors of the dislocation slip and twinning mechanisms which operate within this hexagonal close-packed alloy. The results indicate that a single constitutive model can predict the behavior if it explicitly accounts for the effects of crystallographic texture and grain size. The polycrystal model presently accounts for grain size in an ad hoc manner.
The grain size dependence of the tensile properties and the deformation mechanisms responsible for those properties are examined for Mg alloy, AZ31B, sheet. Specifically, the Hall–Petch effect and ...strain anisotropy (
r-value) are characterized experimentally, and interpreted using polycrystal plasticity modeling. {1
0
.
2} extension twins, {1
0
.
1} contraction twins, and so-called “double-twins” are observed via microscopy and diffraction-based techniques, and the amount of twinning is found to increase with increasing grain size. For the sheet texture and tensile loading condition examined, {1
0
.
2} extension twinning is not expected, yet the polycrystal plasticity model predicts the observed behavior, including this ‘anomalous’ tensile twinning. The analysis shows that the Hall–Petch strength dependence, of the polycrystal as a whole, is primarily determined by the grain size dependence of the strength of the prismatic slip systems.
The integration of 1.5 T MRI functionality with a radiotherapy linear accelerator (linac) has been pursued since 1999 by the UMC Utrecht in close collaboration with Elekta and Philips. The idea ...behind this integrated device is to offer unrivalled, online and real-time, soft-tissue visualization of the tumour and the surroundings for more precise radiation delivery. The proof of concept of this device was given in 2009 by demonstrating simultaneous irradiation and MR imaging on phantoms, since then the device has been further developed and commercialized by Elekta. The aim of this work is to demonstrate the clinical feasibility of online, high-precision, high-field MRI guidance of radiotherapy using the first clinical prototype MRI-Linac. Four patients with lumbar spine bone metastases were treated with a 3 or 5 beam step-and-shoot IMRT plan. The IMRT plan was created while the patient was on the treatment table and based on the online 1.5 T MR images; pre-treatment CT was deformably registered to the online MRI to obtain Hounsfield values. Bone metastases were chosen as the first site as these tumors can be clearly visualized on MRI and the surrounding spine bone can be detected on the integrated portal imager. This way the portal images served as an independent verification of the MRI based guidance to quantify the geometric precision of radiation delivery. Dosimetric accuracy was assessed post-treatment from phantom measurements with an ionization chamber and film. Absolute doses were found to be highly accurate, with deviations ranging from 0.0% to 1.7% in the isocenter. The geometrical, MRI based targeting as confirmed using portal images was better than 0.5 mm, ranging from 0.2 mm to 0.4 mm. In conclusion, high precision, high-field, 1.5 T MRI guided radiotherapy is clinically feasible.
Natural Killer (NK) cells are innate immune cells that secrete lytic granules to directly kill virus-infected or transformed cells across an immune synapse. However, a major gap in understanding this ...process is in establishing how lytic granules pass through the mesh of cortical actin known to underlie the NK cell membrane. Research has been hampered by the resolution of conventional light microscopy, which is too low to resolve cortical actin during lytic granule secretion. Here we use two high-resolution imaging techniques to probe the synaptic organisation of NK cell receptors and filamentous (F)-actin. A combination of optical tweezers and live cell confocal microscopy reveals that microclusters of NKG2D assemble into a ring-shaped structure at the centre of intercellular synapses, where Vav1 and Grb2 also accumulate. Within this ring-shaped organisation of NK cell proteins, lytic granules accumulate for secretion. Using 3D-structured illumination microscopy (3D-SIM) to gain super-resolution of ~100 nm, cortical actin was detected in a central region of the NK cell synapse irrespective of whether activating or inhibitory signals dominate. Strikingly, the periodicity of the cortical actin mesh increased in specific domains at the synapse when the NK cell was activated. Two-colour super-resolution imaging revealed that lytic granules docked precisely in these domains which were also proximal to where the microtubule-organising centre (MTOC) polarised. Together, these data demonstrate that remodelling of the cortical actin mesh occurs at the central region of the cytolytic NK cell immune synapse. This is likely to occur for other types of cell secretion and also emphasises the importance of emerging super-resolution imaging technology for revealing new biology.
Nitryl chloride (ClNO2) plays potentially important roles in atmospheric chemistry, but its abundance and effect are not fully understood due to the small number of ambient observations of ClNO2 to ...date. In late autumn 2013, ClNO2 was measured with a chemical ionization mass spectrometer (CIMS) at a mountain top (957 m above sea level) in Hong Kong. During 12 nights with continuous CIMS data, elevated mixing ratios of ClNO2 (>400 parts per trillion by volume) or its precursor N2O5 (>1000 pptv) were observed on six nights, with the highest ever reported ClNO2 (4.7 ppbv, 1 min average) and N2O5 (7.7 ppbv, 1 min average) in one case. Backward particle dispersion calculations driven by winds simulated with a mesoscale meteorological model show that the ClNO2/N2O5‐laden air at the high‐elevation site was due to transport of urban/industrial pollution north of the site. The highest ClNO2/N2O5 case was observed in a later period of the night and was characterized with extensively processed air and with the presence of nonoceanic chloride. A chemical box model with detailed chlorine chemistry was used to assess the possible impact of the ClNO2 in the well‐processed regional plume on next day ozone, as the air mass continued to downwind locations. The results show that the ClNO2 could enhance ozone by 5–16% at the ozone peak or 11–41% daytime ozone production in the following day. This study highlights varying importance of the ClNO2 chemistry in polluted environments and the need to consider this process in photochemical models for prediction of ground‐level ozone and haze.
Key Points
First observation of ClNO2 in the planetary boundary layer of China
Combined high‐resolution meteorological and measurement‐constrained chemical models in data analysis
ClNO2 enhances daytime ozone peak by 5‐16% in well‐processed PRD air
PDF
