To minimize interfacial power losses, thin (5-80 nm) layers of NiO, a p-type oxide semiconductor, are inserted between the active organic layer, poly(3-hexylthiophene) (P3HT) + 6,6-phenyl-C₆₁ butyric ...acid methyl ester (PCBM), and the ITO (tin-doped indium oxide) anode of bulk-heterojunction ITO/P3HT:PCBM/LiF/Al solar cells. The interfacial NiO layer is deposited by pulsed laser deposition directly onto cleaned ITO, and the active layer is subsequently deposited by spin-coating. Insertion of the NiO layer affords cell power conversion efficiencies as high as 5.2% and enhances the fill factor to 69% and the open-circuit voltage (Voc) to 638 mV versus an ITO/P3HT:PCBM/LiF/Al control device. The value of such hole-transporting/electron-blocking interfacial layers is clearly demonstrated and should be applicable to other organic photovoltaics.
Depositing a pinhole-free perovskite film is of paramount importance to achieve high performance perovskite solar cells, especially in a heterojunction device format that is free of hole transport ...material (HTM). Here, we report that high-quality pinhole-free CH3NH3PbI3 perovskite film can be controllably deposited via a facile low-temperature (<150 °C) gas–solid crystallization process. The crystallite formation process was compared with respect to the conventional solution approach, in which the needle-shaped solvation intermediates (CH3NH3PbI3·DMF and CH3NH3PbI3·H2O) have been recognized as the main cause for the incomplete coverage of the resultant film. By avoiding these intermediates, the films crystallized at the gas–solid interface offer several beneficial features for device performance including high surface coverage, small surface roughness, as well as controllable grain size. Highly efficient HTM-free perovskite solar cells were constructed with these pinhole-free CH3NH3PbI3 films, exhibiting significant enhancement of the light harvesting in the long wavelength regime with respect to the conventional solution processed one. Overall, the gas–solid method yields devices with an impressive power conversion efficiency of 10.6% with high reproducibility displaying a negligible deviation of 0.1% for a total of 30 cells.
Summary
A growing elderly population is expected worldwide, and the burden of hip fractures on health care system will continue to increase. By 2035, there will be a 2.7-fold increase in the number ...of hip fractures in Taiwan. The study provides quantitative basis for the future distribution of medical resources.
Introduction
Hip fractures have long been recognized as a major public health concern. The study aimed to determine time trends in the incidence of hip fractures and to forecast the number of hip fractures expected in Taiwan up to 2035.
Methods
A nationwide survey was conducted using data from the Taiwan National Health Insurance Research Database from 2004 to 2011. A total of 141,397 hip fractures were identified, with a mean of 17,675 fractures/year. Annual incidences of hip fractures were calculated and tested for trends. Projections of the incidence rates of hip fractures and bed days associated with hip fractures were calculated using Poisson regression on the historical incidence rates in combination with population projections from 2012 to 2035.
Results
The incidence rates of hip fracture during 2004–2011 were 317 and 211 per 100,000 person-years among women and men, respectively. Over this 8-year period, the age-standardized incidence of hip fracture decreased by 13.4 % among women and 12.2 % among men. Despite the decline in the age-standardized incidence, the absolute number of hip fractures increased owing to the aging population. The number of hip fractures is expected to increase from 18,338 in 2010 to 50,421 in 2035—a 2.7-fold increase. The number of bed days for 2010 and 2035 was estimated at 161,248 and 501,995, respectively, representing a 3.1-fold increase.
Conclusions
The socioeconomic impact of hip fractures will be high in the near future. This study provides a quantitative basis for future policy decisions to serve this need.
Organic–inorganic perovskite photovoltaics are an emerging solar technology. Developing materials and processing techniques that can be implemented in large‐scale manufacturing is extremely important ...for realizing the potential of commercialization. Here we report a hot‐casting process with controlled Cl− incorporation which enables high stability and high power‐conversion‐efficiencies (PCEs) of 18.2% for small area (0.09 cm2) and 15.4% for large‐area (≈1 cm2) single solar cells. The enhanced performance versus tri‐iodide perovskites can be ascribed to longer carrier diffusion lengths, improved uniformity of the perovskite film morphology, favorable perovskite crystallite orientation, a halide concentration gradient in the perovskite film, and reduced recombination by introducing Cl−. Additionally, Cl− improves the device stability by passivating the reaction between I− and the silver electrode. High‐quality thin films deployed over a large‐area 5 cm × 5 cm eight‐cell module have been fabricated and exhibit an active‐area PCE of 12.0%. The feasibility of material and processing strategies in industrial large‐scale coating techniques is then shown by demonstrating a “dip‐coating” process which shows promise for large throughput production of perovskite solar modules.
A hot‐casting perovskite processing technique with controlled Cl− incorporation affords a high power conversion efficiency of 18.2% for small‐area (0.09 cm2), 15.4% for large‐area (≈1 cm2) single solar cells, and 12.0% for large‐area 5 cm × 5 cm eight‐cell modules and compatibility with large throughput production techniques.
Fracture liaison services (FLS) have been demonstrated to improve outcomes following osteoporotic fracture. The aim of this systematic literature review (SLR) was to determine the characteristics of ...an FLS that lead to improved patient outcomes. We conducted a SLR, including articles published between 2000 and February 2017, using global (Medline, EMBASE, PubMed and Cochrane Library) and local databases. Studies including patients aged ≥ 50 years with osteoporotic fractures enrolled in an FLS were assessed. Information extracted from each article included key person coordinating the FLS (physician, nurse or other healthcare professional), setting (hospital vs community), intensity (single vs multiple), duration (long vs short term), fracture type and gender. A meta-analysis of randomised controlled trials was conducted based on the key person coordinating the FLS. Out of 7236 articles, 57 were considered to be high quality and identified for further analysis. The SLR identified several components which contributed to FLS success, including multidisciplinary involvement, driven by a dedicated case manager, regular assessment and follow-up, multifaceted interventions and patient education. Meta-analytic data confirm the effectiveness of an FLS following an osteoporotic fracture: approximate 27% increase in the likelihood of BMD testing and up to 21% increase in the likelihood of treatment initiation compared with usual care. The balance of evidence indicates that the multifaceted FLS and dedicated coordination are important success factors that contribute to effective FLS interventions which reduce fracture-related morbidity and mortality.
This study comprehensively investigates the changing biodistribution of fluorescent-labelled polystyrene latex bead nanoparticles in a mouse model of inflammation. Since inflammation alters systemic ...circulatory properties, increases vessel permeability and modulates the immune system, we theorised that systemic inflammation would alter nanoparticle distribution within the body. This has implications for prospective nanocarrier-based therapies targeting inflammatory diseases. Low dose lipopolysaccharide (LPS), a bacterial endotoxin, was used to induce an inflammatory response, and 20 nm, 100 nm or 500 nm polystyrene nanoparticles were administered after 16 hours. HPLC analysis was used to accurately quantify nanoparticle retention by each vital organ, and tissue sections revealed the precise locations of nanoparticle deposition within key tissues. During inflammation, nanoparticles of all sizes redistributed, particularly to the marginal zones of the spleen. We found that LPS-induced inflammation induces splenic macrophage polarisation and alters leukocyte uptake of nanoparticles, with size-dependent effects. In addition, spleen vasculature becomes significantly more permeable following LPS treatment. We conclude that systemic inflammation affects nanoparticle distribution by multiple mechanisms, in a size dependent manner.
Perylenediimide (PDI)-based acceptors offer a potential replacement for fullerenes in bulk-heterojunction (BHJ) organic photovoltaic cells (OPVs). The most promising efforts have focused on creating ...twisted PDI dimers to disrupt aggregation and thereby suppress excimer formation. Here, we present an alternative strategy for developing high-performance OPVs based on PDI acceptors that promote slip-stacking in the solid state, thus preventing the coupling necessary for rapid excimer formation. This packing structure is accomplished by substitution at the PDI 2,5,8,11-positions (“headland positions”). Using this design principle, three PDI acceptors, N,N-bis(n-octyl)-2,5,8,11-tetra(n-hexyl)-PDI (Hexyl-PDI), N,N-bis(n-octyl)-2,5,8,11-tetraphenethyl-PDI (Phenethyl-PDI), and N,N-bis(n-octyl)-2,5,8,11-tetraphenyl-PDI (Phenyl-PDI), were synthesized, and their molecular and electronic structures were characterized. They were then blended with the donor polymer PBTI3T, and inverted OPVs of the structure ITO/ZnO/Active Layer/MoO3/Ag were fabricated and characterized. Of these, 1:1 PBTI3T:Phenyl-PDI proved to have the best performance with J sc = 6.56 mA/cm2, V oc = 1.024 V, FF = 54.59%, and power conversion efficiency (PCE) = 3.67%. Devices fabricated with Phenethyl-PDI and Hexyl-PDI have significantly lower performance. The thin film morphology and the electronic and photophysical properties of the three materials are examined, and although all three materials undergo efficient charge separation, PBTI3T:Phenyl-PDI is found to have the deepest LUMO, intermediate crystallinity, and the most well-mixed domains. This minimizes geminate recombination in Phenyl-PDI OPVs and affords the highest PCE. Thus, slip-stacked PDI strategies represent a promising approach to fullerene replacements in BHJ OPVs.
We introduce a new class of molecular iodosalt compounds for application in next-generation solar cells. Unlike tin-based perovskite compounds CsSnI3 and CH3NH3SnI3, which have Sn in the 2+ oxidation ...state and must be handled in an inert atmosphere when fabricating solar cells, the Sn in the molecular iodosalt compounds is in the 4+ oxidation state, making them stable in air and moisture. As an example, we demonstrate that, using Cs2SnI6 as a hole transporter, we can successfully fabricate in air a solid-state dye-sensitized solar cell (DSSC) with a mesoporous TiO2 film. Doping Cs2SnI6 with additives helps to reduce the internal device resistance, improving cell efficiency. In this way, a Z907 DSSC delivers 4.7% of energy conversion efficiency. By using a more efficient mixture of porphyrin dyes, an efficiency near 8% with photon confinement has been achieved. This represents a significant step toward the realization of low-cost, stable, lead-free, and environmentally benign next-generation solid-state solar cells.
As effective building blocks for high-mobility transistor polymers, oligothiophenes are receiving attention for polymer solar cells (PSCs) because the resulting polymers can effectively suppress ...charge recombination. Here we investigate two series of in-chain donor–acceptor copolymers, PTPDnT and PBTInT, based on thieno3,4-cpyrrole-4,6-dione (TPD) or bithiopheneimide (BTI) as electron acceptor units, respectively, and oligothiophenes (nTs) as donor counits, for high-performance PSCs. Intramolecular S···O interaction leads to more planar TPD polymer backbones, however backbone torsion yields greater open-circuit voltages for BTI polymers. Thiophene addition progressively raises polymer HOMOs but marginally affects their band gaps. FT-Raman spectra indicate that PTPDnT and PBTInT conjugation lengths scale with nT catenation up to n = 3 and then saturate for longer oligomer. Furthermore, the effects of oligothiophene alkylation position are explored, revealing that the alkylation pattern greatly affects film morphology and PSC performance. The 3T with “outward” alkylation in PTPD3T and PBTI3T affords optimal π-conjugation, close stacking, long-range order, and high hole mobilities (0.1 cm2/(V s)). These characteristics contribute to the exceptional ∼80% fill factors for PTPD3T-based PSCs with PCE = 7.7%. The results demonstrate that 3T is the optimal donor unit among nTs (n = 1–4) for photovoltaic polymers. Grazing incidence wide-angle X-ray scattering, transmission electron microscopy, and time-resolved microwave conductivity measurements reveal that the terthiophene-based PTPD3T blend maintains high crystallinity with appreciable local mobility and long charge carrier lifetime. These results provide fundamental materials structure-device performance correlations and suggest guidelines for designing oligothiophene-based polymers with optimal thiophene catenation and appropriate alkylation pattern to maximize PSC performance.
Abstract Background Liver transplant recipients often have violent hemodynamic fluctuation during surgery that may be related to perioperative and postoperative morbidity. Because there are some ...considerations for the risk of the pulmonary arterial catheter (PAC), the conventional invasive device for cardiac output (CO) measurement, a reliable and minimally invasive alternative is required. We validated the reliability of CO measurements with the use of a minimally invasive FloTrac system with the latest fourth-generation algorithm in liver transplant recipients. Methods Forty liver transplant recipients without atrial fibrillation, valvular pathology, or intracardiac shunt were recruited in this prospective, observational study. CO values measured by use of PAC with continuous thermodilution method (COTh ) and FloTrac devices (COFT ) were collected simultaneously throughout the operation for reliability validation. Results Four hundred pairs of CO data points were collected in total. The linear regression analysis showed a high correlation coefficient (73%, P < .001). However, the percent error between COTh and COFT was 42.2%, which is worse than the established interchangeability criterion of 30%. The concordance rates were calculated at 89% and 59% by 4-quadrant plot and polar plot analysis, respectively. Neither met the preset validation criteria (>92% for the 4-quadrant plot and >90% for polar plot analyses). Conclusions Our study demonstrates that the CO measurements in liver transplant recipients by the latest FloTrac system and the PAC do not meet the recognized interchangeability criterion. Although the result showed improvement in linear regression analysis, it failed to display a qualified trending ability.