The development of antibacterial materials has great importance in avoiding bacterial contamination and the risk of infection for implantable biomaterials. An antibacterial thin film coating on the ...surface via chemical bonding is a promising technique to keep native bulk material properties unchanged. However, most of the polymeric materials are chemically inert and highly hydrophobic, which makes chemical agent coating challenging Herein, immobilization of chlorhexidine, a broad-spectrum bactericidal cationic compound, onto the polylactic acid surface was performed in a multistep physicochemical method. Direct current plasma was used for surface functionalization, followed by carbodiimide chemistry to link the coupling reagents of N-(3-Dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride (EDAC) and N-Hydroxysuccinimide (NHs) to create a free bonding site to anchor the chlorhexidine. Surface characterizations were performed by water contact angle test, X-ray photoelectron spectroscopy (XPS) and scanning electron microscope (SEM). X-ray photoelectron spectroscopy (XPS) and scanning electron microscope (SEM). The antibacterial activity was tested using
and
. Finally, in vitro cytocompatibility of the samples was studied using primary mouse embryonic fibroblast cells. It was found that all samples were cytocompatible and the best antibacterial performance observed was the Chlorhexidine immobilized sample after NHs activation.
The design of improved biopolymeric based hydrogel materials with high load-capacity to serve as biocompatible drug carriers is a challenging task with vital implications in health sciences. In this ...work, chitosan crosslinked dialdehyde xanthan gum interpenetrated hydroxypropyl methylcellulose gels were developed for the controlled delivery of different antibiotic drugs including ampicillin, minocycline and rifampicin. The prepared hydrogel scaffolds were characterized by rheology method, FTIR, SEM, TGA and compression analysis. In addition, gelation kinetics, swelling, in vitro degradation and drug release rate were studied under simulated gastrointestinal fluid conditions of pH 2.0 and 7.4 at 37 °C. Results demonstrated the gel composition and structure affected drug release kinetics. The release study showed more than 50% cumulative release within 24 h for all investigated antibiotic drugs. In vitro cell cytocompatibility using mouse embryonic fibroblast cell lines depicted ≥80% cell viability, indicating the gels are non-toxic. Finally, the antibacterial activity of loaded gels was evaluated against Gram-negative and positive bacteria (Escherichia coli, Staphylococcus aureus and Klebsiella pneumonia), which correlated well with swelling and drug release results. Overall, the present study demonstrated that the produced hydrogel scaffolds serves as promising material for controlled antibiotic delivery towards microbial growth inhibition.
Display omitted
•Self-crosslinked chitosan/xanthan interpenetrated hypromellose hydrogels were developed.•Hydrogels showed good mechanical stability and high pore distribution.•The hydrogel scaffolds were loaded with ampicillin, minocycline and rifampicin drugs.•The scaffolds showed good in vitro release, biocompatibility and antibacterial activity.
In this study we report the preparation of novel multicomponent hydrogels as potential biomaterials for injectable hydrogels comprised of alginate, casein and bacterial cellulose impregnated with ...iron nanoparticles (BCF). These hydrogels demonstrated amide cross-linking of alginate-casein, ionic cross-linking of alginate and supramolecular interaction due to incorporation of BCF. Incorporation of BCF into the hydrogels based on natural biopolymers was done to reinforce the hydrogels and impart magnetic properties critical for targeted drug delivery. This study aimed to improve overall properties of alginate/casein hydrogels by varying the BCF loading. The physico-chemical properties of gels were characterized via FTIR, XRD, DSC, TGA, VSM and mechanical compression. In addition, swelling, drug release, antibacterial activity and cytotoxicity studies were also conducted on these hydrogels. The results indicated that incorporation of BCF in alginate/casein hydrogels led to mechanically stronger gels with magnetic properties, increased porosity and hence increased swelling. A porous structure, which is essential for migration of cells and biomolecule transportation, was confirmed from microscopic analysis. The porous internal structure promoted cell viability, which was confirmed through MTT assay of fibroblasts. Moreover, a hydrogel can be useful for the delivery of essential drugs or biomolecules in a sustained manner for longer durations. These hydrogels are porous, cell viable and possess mechanical properties that match closely to the native tissue. Collectively, these hybrid alginate-casein hydrogels laden with BCF can be fabricated by a facile approach for potential wound healing applications.
Display omitted
•Cotton fabrics were coated in situ with conducting polymers, polyaniline or polypyrrole.•Silver nanoparticles were deposited on the surface.•Polypyrrole-coated cotton displayed ...antibacterial effect even without silver nanoparticles.•Cytotoxicity of cotton modified with polypyrrole was low.
Cotton fabric was coated with conducting polymers, polyaniline or polypyrrole, in situ during the oxidation of respective monomers. Raman and FTIR spectra proved the complete coating of substrates. Polypyrrole content was 19.3wt.% and that of polyaniline 6.0wt.%. Silver nanoparticles were deposited from silver nitrate solutions of various concentrations by exploiting the reduction ability of conducting polymers. The content of silver was up to 11wt.% on polypyrrole and 4 wt.% on polyaniline. The sheet resistivity of fabrics was determined. The conductivity was reduced after deposition of silver. The chemical cleaning reduced the conductivity by less than one order of magnitude for polypyrrole coating, while for polyaniline the decrease was more pronounced. The good antibacterial activity against S. aureus and E. coli and low cytotoxicity of polypyrrole-coated cotton, both with and without deposited silver nanoparticles, were recorded, and they promise a broad applicability of this material. Polyaniline-coated samples showed lower antibacterial activity and higher cytotoxicity compared to polypyrrole-based materials.
Display omitted
•2,3-Dialdehyde cellulose (DAC) is effective crosslinker for poly(vinyl alcohol).•PVA/DAC hydrogels are biocompatible and non-toxic.•Their properties can be engineered for various ...biomaterial applications.•Mechanical and surface properties superior to PVA/glutaraldehyde hydrogels.•Potential of PVA/DAC hydrogels for drug-delivery applications demonstrated.
Solubilized dialdehyde cellulose (DAC), an efficient crosslinking agent for poly(vinyl alcohol) (PVA), provides less toxic alternative to current synthetic crosslinking agents such as glutaraldehyde, while simultaneously allowing for the preparation of hydrogels with comparably better characteristics. PVA/DAC hydrogels prepared using 0.5, 1 and 1.5 wt% of DAC were analyzed in terms of mechanical, swelling and cytotoxicity characteristics. Materials properties of PVA/DAC hydrogels range from stiff substances to soft viscoelastic gels capable of holding large amounts of water. Superior mechanical properties, porosity and surface area in comparison with analogical PVA/glutaraldehyde hydrogels were observed. Biological studies showed low toxicity and good biocompatibility of PVA/DAC hydrogels. Potential of PVA/DAC in mesh-controlled release of biologically active compounds was investigated using ibuprofen, rutin and phenanthriplatin. Hydrogel loaded with anticancer drug phenantriplatin was found effective against alveolar cancer cell line A549 under in vitro conditions.
Display omitted
•Oxidized cellulose, dextrin, dextran and hyaluronate compared as cisplatin carriers.•Role of glycosidic bond type, branching, platinum binding mode investigated.•Loading, release, in ...vitro cytotoxicity and cellular uptake of platinum compared.•Linear polysaccharides with β-glycosidic bonds are best cisplatin carriers.
Study provides an in-depth analysis of the structure-function relationship of polysaccharide anticancer drug carriers and points out benefits and potential drawbacks of differences in polysaccharide glycosidic bonding, branching and drug binding mode of the carriers. Cellulose, dextrin, dextran and hyaluronic acid have been regioselectively oxidized to respective dicarboxylated derivatives, allowing them to directly conjugate cisplatin, while preserving their major structural features intact. The structure of source polysaccharide has crucial impact on conjugation effectiveness, carrier capacity, drug release rates, in vitro cytotoxicity and cellular uptake. For example, while branched structure of dextrin-based carrier partially counter the undesirable initial burst release, it also attenuates the cellular uptake and the cytotoxicity of carried drug. Linear polysaccharides containing β-(1→4) glycosidic bonds and oxidized at C2 and C3 (cellulose and hyaluronate) have the best overall combination of structural features for improved drug delivery applications including potentiation of the cisplatin efficacy towards malignances.
A little is known about the link between the macromolecular architecture of dialdehyde polysaccharides (DAPs), their crosslinking capabilities, and the properties of resulting hydrogels. Here, DAPs ...based on cellulose, dextrin, dextran, and hyaluronate were compared as crosslinkers for poly(vinyl alcohol), PVA. The swelling, network parameters, viscoelastic properties, porosity, and cytotoxicity of PVA/DAP hydrogels were investigated concerning the crosslinker structure, molecular weight, aldehyde group density per macromolecule, and the size of spontaneously formed crosslinker nano-assemblies. Generally, crosslinkers based on linear polysaccharides (cellulose, hyaluronate) performed more reliably, while the presence of branching could be both beneficial (dextran) but also detrimental (dextrin) at lower crosslinker concentrations. For example, the hydrogel swelling differed by up to one-third (600 vs. 400%) and storage modulus even by up to one half (~7000 vs. ~3500 Pa) depending on crosslinker structure and properties. These differences were rationalized by variances in crosslinking modes derived based on obtained data.
Display omitted
A green, nature-friendly synthesis of polyaniline colloidal particles based on enzyme-assisted oxidation of aniline with horseradish peroxidase and chitosan or poly(vinyl alcohol) as steric ...stabilizers was successfully employed. Physicochemical characterization revealed formation of particles containing the polyaniline emeraldine salt and demonstrated only a minor effect of polymer stabilizers on particle morphology. All tested colloidal particles showed in vitro antioxidation activity determined via scavenging of 1,1-diphenyl-2-picrylhydrazyl (DPPH) radicals. In vitro, they were able to reduce oxidative stress and inhibit the production of reactive oxygen species by neutrophils and inflammatory cytokines by macrophages. The anti-inflammatory effect observed was related to their antioxidant activity, especially in the case of neutrophils. The particles can thus be especially advantageous as active components of biomaterials modulating the early stages of inflammation. In addition to the immunomodulatory effect, the presence of intrinsically conducting polyaniline can impart cell-instructive properties to the particles. The approach to particle synthesis that we employedan original one using environmentally friendly and biocompatible horseradish peroxidaserepresents a smart way of preparing conducting particles with unique properties, which can be further modified by the stabilizers used.
Highlghts
•Polyaniline colloids stabilised with sodium hyaluronate and chitosan were prepared.•Hyaluronate and chitosan with different molecular weights were employed.•Colloidal dispersions ...containing both polymers were not cytotoxic.•Antibacterial activities of colloids against S. aureus and E. coli were proved.•Best performing colloid was prepared with high-molecular-weight hyaluronate.
Display omitted
Colloidal polyaniline dispersions stabilized with biocompatible polysaccharides, sodium hyaluronate and chitosan (both with two different molecular weights), were successfully formulated. The colloids were characterized by UV–vis spectra, particle-size distributions and morphology, as well as by their biological properties in terms of cytotoxicity and antibacterial activity. Colloids containing both chitosan and hyaluronate showed only mild cytotoxicities, which were mainly governed by the concentration of conducting polyaniline in the colloid. Antibacterial activity of the samples, however, depended both on the type of polysaccharide and the ratio between the stabilizer and polyaniline mass. The colloid synthetized using 0.2 M aniline hydrochloride, 0.1 M ammonium persulfate, and 1 wt.% sodium hyaluronate of molecular weight of 1.8–2.1 × 106 exhibited the highest antibacterial activity against both gram positive and gram negative bacteria. This formulation, therefore, allowed for the formation of potentially stimuli-responsive antibacterial colloidal particles with low cytotoxicity.