We have developed a MATLAB software package for the most common models used to interpret deformation measurements near faults and active volcanic centers. The emphasis is on analytical models of ...deformation that can be compared with data from the Global Positioning System (GPS), InSAR, tiltmeters and strainmeters. Source models include pressurized spherical, ellipsoidal and sill-like magma chambers in an elastic, homogeneous, flat half-space. Dikes and faults are described following the mathematical notation for rectangular dislocations in an elastic, homogeneous, flat half-space. All the expressions have been checked for typographical errors that might have been present in the original literature, extended to include deformation and strain within the Earth's crust (as opposed to only the Earth's surface) and verified against finite element models. A set of GPS measurements from the 2006 eruption at Augustine Volcano (Alaska) is used to test the software package. The results show that the best fit source to the GPS data is a spherical intrusion (ΔV=5×10−4km3), about 880m beneath the volcano's summit.
► The software is a practical tool to investigate volcano and earthquake deformation. ► Emphasis is on analytical models of crustal deformation. ► Formulas were checked for typographical errors existing in the original references. ► All analytical models were verified against numerical models. ► The software package is freely available and open source.
Slow inflation began at Long Valley Caldera in late 2011, coinciding with renewed swarm seismicity. Ongoing deformation is concentrated within the caldera. We analyze this deformation using a ...combination of GPS and InSAR (TerraSAR‐X) data processed with a persistent scatterer technique. The extension rate of the dome‐crossing baseline during this episode (CA99 to KRAC) is 1 cm/yr, similar to past inflation episodes (1990–1995 and 2002–2003), and about a tenth of the peak rate observed during the 1997 unrest. The current deformation is well modeled by the inflation of a prolate spheroidal magma reservoir ∼7 km beneath the resurgent dome, with a volume change of ∼6 × 106 m3/yr from 2011.7 through the end of 2014. The current data cannot resolve a second source, which was required to model the 1997 episode. This source appears to be in the same region as previous inflation episodes, suggesting a persistent reservoir.
Key Points
Uplift at Long Valley began in late 2011
Well modeled by inflation of ∼7 km deep prolate ellipsoid
Source colocated with previous sources, suggesting persistent reservoir
The Mu2e Experiment at Fermilab CERVELLI, F
Journal of physics. Conference series,
12/2011, Letnik:
335, Številka:
1
Journal Article
Recenzirano
Odprti dostop
The Mu2e Collaboration has proposed an experiment at Fermilab to search for the coherent decay of a muon to an electron in the Coulomb field of a nucleus with an expected sensitivity less than 10−16. ...In this article the physics motivations and status of the experiment are described.
The Mu2e experiment at Fermilab searches for the charged-lepton flavor violating (CLFV) conversion of a negative muon into an electron in the field of an aluminum nucleus, with a distinctive ...signature of a monoenergetic electron of energy slightly below the muon rest mass (104.967 MeV). The Mu2e goal is to improve by four orders of magnitude the search sensitivity with respect to the previous experiments. Any observation of a CLFV signal will be a clear indication of new physics. The Mu2e detector is composed of a tracker, an electromagnetic calorimeter, and an external veto for cosmic rays surrounding the solenoid. The calorimeter plays an important role in providing particle identification capabilities, a fast online trigger filter, a seed for track reconstruction while working in vacuum, in the presence of 1-T axial magnetic field and in a harsh radiation environment. The calorimeter requirements are to provide a large acceptance for 100-MeV electrons and reach at these energies: 1) a time resolution better than 0.5 ns; 2) an energy resolution <10%; and 3) a position resolution of 1 cm. The calorimeter design consists of two disks, each one made of 674-undoped cesium iodine crystals read by two large area arrays of UV-extended silicon photomultipliers (SiPMs). We report here the construction and the test of the Module-0 prototype. The Module-0 has been exposed to an electron beam in the energy range around 100 MeV at the Beam Test Facility in Frascati. Preliminary results of timing and energy resolution at normal incidence are shown. A discussion of the technical aspects of the calorimeter engineering is also reported in this paper.
The Mu2e experiment is constructing a calorimeter consisting of 1348 undoped cesium iodide (CsI) crystals in two disks. Each crystal has a dimension of 34 × 34 × 200 mm3 and is readout by a ...large-area silicon photomultipliers array. A series of technical specifications on mechanical and optical parameters was defined according to the calorimeter physics requirements. Preproduction CsI crystals were procured from three firms: Amcrys, Saint-Gobain, and Shanghai Institute of Ceramics. We report the quality assurance on crystal's scintillation properties and their radiation hardness against ionization dose and neutrons. With a fast decay time of about 30 ns and a light output of more than 100 p.e./MeV measured by a bialkali photomultiplier tube, undoped CsI crystals provide a cost-effective solution for Mu2e.
The Mu2e experiment at Fermilab will search for the charged lepton flavor violating neutrino-less conversion of a negative muon into an electron in the field of an aluminum nucleus <xref ...ref-type="bibr" rid="ref1">1 , <xref ref-type="bibr" rid="ref2">2 . The Mu2e detector is comprised of a tracker, an electromagnetic calorimeter, and an external veto for cosmic rays. The calorimeter plays an important role in providing excellent particle identification capabilities, a fast and online trigger filter while aiding the track reconstruction capabilities. The calorimeter requirements are to provide a large acceptance for 100-MeV electrons and reach: 1) a time resolution better than 0.5 ns at 100 MeV; 2) an energy resolution O(10%) at 100 MeV; and 3) a position resolution of about 1 cm. The calorimeter consists of two disks, each one made of 674 pure CsI crystals readout by two large-area <inline-formula> <tex-math notation="LaTeX">2 \times 3 </tex-math></inline-formula> array of UV-extended silicon photomultipliers (Mu2e SiPMs) of <inline-formula> <tex-math notation="LaTeX">6\,\,\times6 </tex-math></inline-formula> mm 2 dimensions. A large-scale prototype has been constructed with 51 preproduction crystals readout by 102 Mu2e SiPMs. It has been tested at the beam test facility in Frascati, demonstrating satisfying results compared to the Mu2e requirements. At the moment of writing, the crystals production phase is halfway through the work, while the SiPM production has been completed. An overview of the characterization tests is also reported, together with a description of the final calorimeter design.
Mu2e will search for the Charge Lepton Flavor Violating (CLFV) conversion of a muon into an electron in the field of a nucleus. A clean discovery signature is provided by the mono-energetic ...conversion electron (
E
e
= 104.96 MeV). If no events are observed, Mu2e will set a limit on the ratio between the conversion and the nuclear capture rate below 3 × 10
−17
(at 90% C.L.). In order to confirm that the observed candidate is an electron, the calorimeter resolution requirements are to provide
E
res
< 10%,
T
res
< 500 ps for 100 MeV electrons while working in vacuum and in a high radiation environment and high magnetic field. The calorimeter is made of two annular aluminum disks, each one filled with 674 pure CsI crystals read out by SiPMs. A sophisticated mechanics and cooling system has been developed to support the crystals and cool the sensors. Radiation hard analog and fast digital electronics have been developed. In this paper the QC tests performed on the produced components and the construction status are reported, as well as the results obtained on the large size prototype with test beam data and at a cosmic ray test stand.
On January 11, 2006 Augustine Volcano erupted after nearly 20 years of quiescence. Global Positioning System (GPS) instrumentation at Augustine, consisting of six continuously recording, telemetered ...receivers, measured clear precursory deformation consistent with a source of inflation or pressurization beneath the volcano's summit at a depth of around sea level. Deformation began in early summer 2005, and was preceded by a subtle, but distinct, increase in seismicity, which began in May 2005. After remaining more or less constant, deformation rates accelerated on at least three stations beginning in late November 2005. After this date, GPS data suggest the upward propagation of a small dike into the edifice, which, based on the style of deformation and high levels of gas emission, appears to have ascended to shallow levels by mid‐December 2005, about four weeks before the eruption began.
The Mu2e calorimeter consists of 1348 pure CsI crystals coupled to two large area UV-extended Silicon Photomultipliers (SiPMs) organized in two separate annular disks. An intense R&D phase has been ...pursued to check if this configuration satisfies the Mu2e requirements. In May 2017, a dedicated test has been performed at the Beam Test Facility (BTF) in Frascati (Italy) where the large calorimeter prototype (Module-0) has been exposed to an electron beam in the energy range between 60 and 120 MeV. The prototype consists of 51 crystals, each one readout by two Mu2e SiPMs. We present results for timing and energy resolution both for electrons at normal incidence (0°) and at a grazing impact angle (50°) more similar to the experiment configuration. At 100 MeV, an energy resolution of 5.4% (7.4%) at normal (grazing) incidence has been achieved in good agreement with Monte Carlo expectation. In the same energy range, a time resolution of ∼ XX ps (∼ YY ps) has been measured at normal incidence with 1 GHz (250 MHz) sampling rate. Dependence of time and energy resolutions as a function of beam energy and impinging angle are also presented.