The Time-Of-Flight (TOF) detector of the ALICE experiment at the CERN LHC is based on Multi-gap Resistive Plate Chambers (MRPCs) technology. During the 2009-2013 data taking the TOF system had very ...stable operations with a total time resolution of 80ps. Details of the different calibration procedures and performance with data from collisions at the LHC will be described.
The longitudinal segmentation of shashlik calorimeters is challenged by dead zones and non-uniformities introduced by the light collection and readout system. This limitation can be overcome by ...direct fiber–photosensor coupling, avoiding routing and bundling of the wavelength shifter fibers and embedding ultra-compact photosensors (SiPMs) in the bulk of the calorimeter. We present the first experimental test of this readout scheme performed at the CERN PS-T9 beamline in 2015 with negative particles in the 1–5GeV energy range. In this paper, we demonstrate that the scheme does not compromise the energy resolution and linearity compared with standard light collection and readout systems. In addition, we study the performance of the calorimeter for partially contained charged hadrons to assess the e/π separation capability and the response of the photosensors to direct ionization.
Effective longitudinal segmentation of shashlik calorimeters can be achieved taking advantage of the compactness and reliability of silicon photomultipliers. These photosensors can be embedded in the ...bulk of the calorimeter and are employed to design very compact shashlik modules that sample electromagnetic and hadronic showers every few radiation lengths. In this paper, we discuss the performance of a calorimeter made up of 12 such modules and able to sample showers every ~4X 0 . In summer 2016, this prototype has been exposed to electrons, muons, and hadrons at CERN PS (East Area T9 beamline). The performances in terms of energy resolution, linearity, response to minimum ionizing particles, and reconstruction of the shower profile are discussed.
The ENUBET project is aimed at designing and experimentally demonstrating the concept of monitored neutrino beams. These novel beams are enhanced by an instrumented decay tunnel, whose detectors ...reconstruct large-angle charged leptons produced in the tunnel and give a direct estimate of the neutrino flux at the source. These facilities are thus the ideal tool for high-precision neutrino cross-section measurements at the GeV scale because they offer superior control of beam systematics with respect to existing facilities. In this paper, we present the first end-to-end design of a monitored neutrino beam capable of monitoring lepton production at the single particle level. This goal is achieved by a new focusing system without magnetic horns, a 20 m normal-conducting transfer line for charge and momentum selection, and a 40 m tunnel instrumented with cost-effective particle detectors. Employing such a design, we show that percent precision in cross-section measurements can be achieved at the CERN SPS complex with existing neutrino detectors.
Polysiloxane-based scintillators for shashlik calorimeters Acerbi, F.; Branca, A.; Brizzolari, C. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
03/2020, Letnik:
956
Journal Article
Recenzirano
Odprti dostop
We present the first application of polysiloxane-based scintillators as active medium in a shashlik sampling calorimeter. These results were obtained from a testbeam campaign of a ∼6×6×45 cm3 (13 X0 ...depth) prototype. A Wavelength Shifting fiber array of 36 elements runs perpendicularly to the stack of iron (15 mm) and polysiloxane scintillator (15 mm) tiles with a density of about one over cm2. Unlike shashlik calorimeters based on plastic organic scintillators, here fibers are optically matched with the scintillator without any intermediate air gap. The prototype features a compact light readout based on Silicon Photo-Multipliers embedded in the bulk of the detector. The detector was tested with electrons, pions and muons with energies ranging from 1 to 7 GeV at the CERN-PS. This solution offers a highly radiation hard detector to instrument the decay region of a neutrino beam, providing an event-by-event measurement of high-angle decay products associated with neutrino production (ENUBET, Enhanced NeUtrino BEams from kaon Tagging, ERC project). The results in terms of light yield, uniformity and energy resolution, are compared to a similar calorimeter built with ordinary plastic scintillators.
Various experiments are searching for detectors that can cover large areas (as in the present LHC experiments) with excellent timing performances and insensitivity to magnetic field. A detector based ...on scintillators coupled to SiPM can fulfil these requirements. SiPMs are indeed replacing the standard PhotoMultiplier technology thanks to the many advantages, with the corresponding possibility to achieve also higher segmentations in calorimetry or other applications. Also in view of future colliders experiments like HL-LHC or FCC or medical applications like TOF-PET, an important R&D on timing performances of SiPMs-scintillator detectors has begun, with the goal of including them in the list of possible 4-D tracking-timing devices.
An R&D on SiPM coupled to scintillator time resolution has been performed in a cosmic ray setup. Different kind of SiPMs, geometries of SiPMs coupled to the scintillator and different size of scintillator have been also studied. A time resolution of ∼69 ps, comprehensive of the full electronic chain, from the front-end to the readout electronics, has been achieved with SiPMs coupled to a 2x2x3 cm3 plastic scintillator.
The goal of the ENUBET project is to demonstrate that a precision of ∼1% on measurement of the absolute neutrino cross section at GeV scale can be achieved by monitoring the positron production in ...the decay tunnel coming from the three-body semileptonic decays of kaons. The baseline option for the tunnel instrumentation employs a fine-grained shashlik calorimeter with a 4.3 X0 longitudinal segmentation to separate positrons and pions coming from other decay modes of kaons. The system is complemented by rings of plastic scintillator doublets below the calorimeter acting as a photon veto to suppress the π0 background and to provide timing informations. SiPMs instrumenting the detector will be exposed to sizeble amounts of neutrons arising in hadronic showers. In order to reproduce such a working environment, SiPMs with different cell size (from 12 to 20 μm) were irradiated at the INFN-LNL CN Van Der Graaf with neutron fluences up to 2×1011 n/cm2 (1 MeV-eq.). The exposed light sensors were characterized in terms of I–V curves at different irradiation levels, and their response tested by exposing a prototype on beam at CERN. In this contribution we will report the results of the described tests on SiPMs, together with the advances in their integration with the ENUBET detectors.
PDF
