An innovative treatment for congested urban road networks is the split intersection. Here, a congested two-way–two-way traffic light-controlled intersection is transformed into two lighter ...intersections. By reducing conflict points and improving travel time, it facilitates smoother flow with less driver delay. We propose a visible light communication system based on Vehicle-to-Vehicle (V2V), Vehicle-to-Infrastructure (V2I) and Infrastructure-to-Vehicle (I2V) communications able to safely manage vehicles crossing through an intersection, leveraging Edge of Things (EoT) facilities. Headlights, street lamps, and traffic signals are used by connected vehicles to communicate with one another and with infrastructure. Through internally installed Driver Agents, an Intersection Manager coordinates traffic flow and interacts with vehicles. For the safe passage of vehicles across intersections, request/response mechanisms and time and space relative pose concepts are used. A virtual scenario is proposed, and a “mesh/cellular” hybrid architecture used. Light signals are emitted by transmitters by encoding, modulating, and converting data. Optical sensors with light-filtering properties are used as receivers and decoders. The VLC request/response concept uplink and downlink communication between the infrastructure and the vehicles is tested. Based on the results, the short-range mesh network provides a secure communication path between street lamp controllers and edge computers through neighbor traffic light controllers that have active cellular connections, as well as peer-to-peer communication, allowing V-VLC ready cars to exchange information.
The ALICE Experiment (A Large Ion Collider Experiment) aims to study the properties of quark-gluon matter using Pb-Pb collisions at a center of mass energy (per nucleon pair) of TeV with the Large ...Hadron Collider (LHC) at CERN. The EMCAL detector is a large area electromagnetic calorimeter. ALICE's capability to perform jet reconstruction is greatly improved by measuring the neutral energy component of jets including photons and neutral pions. The calorimeter produces also a fast, high-pT trigger providing an enhancement in high-pT events, participates in the High Level Trigger (HLT), performing online reconstruction at the full data rates and generates trigger information based on reconstructed events. The performance of prototypes has been studied in test beam measurements at FNAL and CERN and are shown. Four EMCAL super-modules have been installed at CERN and are operational. First results from data taking are presented. Moreover, an extension of EMCAL for jet-jet and γ-jet physics will be discussed.
Directive 2000/60/EC requires the achievement of a 'good chemical status' for surface water within pre-established dates. Disinfection is needed to achieve compulsory final microbial limit values (in ...Italy for wastewater discharges the parameter Escherichia coli - EC - is imposed by law with a maximum limit value of 5,000 cfu/100 mL). Liquid waste and disinfection by-products must be considered when designing appropriate monitoring of dangerous substances; the specific classes of substances must be investigated according to the typology of received wastewaters and liquid wastes (where applicable) and specific analytical techniques, with Limit of Detection (LOD) lower than the limit values, must be applied; the difficulties faced by national and regional environmental control Agencies is that these techniques have to be applied during ordinary activity and not only for research purposes. The study aims to present the control of dangerous substances, as a screening view, in wastewater treatment plant (WWTP) discharges in the province of Venice (Northern Italy) for the period 2007-2010 based on available data from institutional controls. In addition, the wastewater disinfection process with ozone applied to a medium size WWTP (45,000 Population Equivalents) is presented as a case study, with a view to assessing the microbiological abatement efficacy and the presence of dangerous substances. Discharge quality of the WWTPs in the province of Venice presented mean values that were higher than the LOD, but only for certain metals. For the Paese plant, zinc and chloroform were the only micro-pollutants detected with a higher level than the LOD. From microbiological data in the period 2006-2011 the disinfection abatement efficiency for Paese was, in most cases above 99% for EC, faecal coliform (FC), faecal streptococci (FS) while efficiency was slightly lower for total coliform (TC); however, the proposed criterion aimed at respecting 99.99% abatement was not completely satisfied. Therefore, despite the high organic and industrial load of the considered plant and the need to find an alternative system for chlorine, as chlorine disinfection has been banned in the Veneto region since December 2012, ozone efficiency is not completely satisfactory and other systems such as peracetic or performic acids and UV systems must be considered.
This paper reports about a study of the local plasmonic resonance (LSPR) produced by metal nanoparticles embedded in a dielectric or semiconductor matrix. It is presented an analysis of the LSPR for ...different nanoparticle metals, shapes, and embedding media composition. Metals of interest for nanoparticle composition are Aluminum and Gold. Shapes of interest are nanospheres and nanotriangles. We study in this work the optical properties of metal nanoparticles diluted in water or embedded in amorphous silicon, ITO and ZnO as a function of size, aspect-ratio and metal type. Following the analysis based on the exact solution of the Mie theory and DDSCAT numerical simulations, it is presented a comparison with experimental measurements realized with arrays of metal nanospheres. Simulations are also compared with the LSPR produced by gold nanotriangles (Au NTs) that were chemically produced and characterized by microscope and optical measurements.
•SiC wavelength selector, under optical bias, acts as reconfigurable active filters.•The selector filter uses an optical biased pin/pin a-SiC:H photodetector.•The device becomes reconfigurable acting ...either as data selector or data router.•The index is a 4-bit binary RGBV or VBGR code under front or back irradiation.•An algorithm to decode the transmitted information is presented.
Expanding far beyond traditional applications at telecommunications wavelengths, the SiC photonic devices has recently proven its merits for working with visible range optical signals. Reconfigurable wavelength selectors are essential sub-systems for implementing reconfigurable WDM networks and optical signal processing. Visible range to telecom band spectral translation in SiC/Si can be accomplished using wavelength selector under appropriated optical bias, acting as reconfigurable active filters. In this paper we present a monolithically integrated wavelength selector based on a multilayer SiC/Si integrated optical filters that requires optical switches to select wavelengths. The selector filter is realized by using double pin/pin a-SiC:H photodetector with front and back biased optical gating elements. Red, green, blue and violet communication channels are transmitted together, each one with a specific bit sequence. The combined optical signal is analyzed by reading out the generated photocurrent, under different background wavelengths applied either from the front or the back side. The backgrounds acts as channel selectors that selects one or more channels by splitting portions of the input multi-channel optical signals across the front and back photodiodes. The transfer characteristics effects due to changes in steady state light, irradiation side and frequency are presented. The relationship between the optical inputs and the digital output levels is established.
► Tunable WDM converters based on SiC multilayer photonic active filters are analyzed. ► Integrated active long,- and short-pass wavelength filters into capacitive band-pass filters. ► The photonic ...device combines the demultiplexing operation with the simultaneous photodetection and self amplification of an optical signal. ► The wavelength background and irradiation side control the filter characteristics. ► A numerical simulation and a two building-blocks active circuit are presented.
Combined tunable WDM converters based on SiC multilayer photonic active filters are analyzed. The operation combines the properties of active long-pass and short-pass wavelength filter sections into a capacitive active band-pass filter.
The sensor element is a multilayered heterostructure produced by PE-CVD. The configuration includes two stacked SiC p–i–n structures sandwiched between two transparent contacts. Transfer function characteristics are studied both theoretically and experimentally.
Results show that optical bias activated photonic device combines the demultiplexing operation with the simultaneous photodetection and self amplification of an optical signal acting the device as an integrated photonic filter in the visible range. Depending on the wavelength of the external background and irradiation side, the device acts either as a short- or a long-pass band filter or as a band-stop filter. The output waveform presents a nonlinear amplitude-dependent response to the wavelengths of the input channels. A numerical simulation and a two building-blocks active circuit are presented and give insight into the physics of the device.
Capacitive effects in pinpin photodiodes Fantoni, A.; Fernandes, M.; Louro, P. ...
Microelectronic engineering,
08/2013, Letnik:
108
Journal Article, Conference Proceeding
Recenzirano
Odprti dostop
Display omitted
► We have presented experimental results on the capacitance of a-Si:H/a-SiC:H pinpin photodiode. ► The behaviour of the device has been explained recurring to a numerical simulation. ...► Trapped charge in the bottom diode intrinsic layer controls the photo-capacitance.
The application of a-SiC:H/a-Si:H pinpin photodiodes for optoelectronic applications as a WDM demultiplexer device has been demonstrated useful in optical communications that use the WDM technique to encode multiple signals in the visible light range. This is required in short range optical communication applications, where for costs reasons the link is provided by Plastic Optical Fibers. Characterization of these devices has shown the presence of large photocapacitive effects. By superimposing background illumination to the pulsed channel the device behaves as a filter, producing signal attenuation, or as an amplifier, producing signal gain, depending on the channel/background wavelength combination.
We present here results, obtained by numerical simulations, about the internal electric configuration of a-SiC:H/a-Si:H pinpin photodiode. These results address the explanation of the device functioning in the frequency domain to a wavelength tunable photo-capacitance due to the accumulation of space charge localized at the bottom diode that, according to the Shockley–Read–Hall model, it is mainly due to defect trapping. Experimental result about measurement of the photodiode capacitance under different conditions of illumination and applied bias will be also presented. The combination of these analyses permits the description of a wavelength controlled photo-capacitance that combined with the series and parallel resistance of the diodes may result in the explicit definition of cut off frequencies for frequency capacitive filters activated by the light background or an oscillatory resonance of photogenerated carriers between the two diodes.