Less than thirty years after the giant magnetoresistance (GMR) effect was described, GMR sensors are the preferred choice in many applications demanding the measurement of low magnetic fields in ...small volumes. This rapid deployment from theoretical basis to market and state-of-the-art applications can be explained by the combination of excellent inherent properties with the feasibility of fabrication, allowing the real integration with many other standard technologies. In this paper, we present a review focusing on how this capability of integration has allowed the improvement of the inherent capabilities and, therefore, the range of application of GMR sensors. After briefly describing the phenomenological basis, we deal on the benefits of low temperature deposition techniques regarding the integration of GMR sensors with flexible (plastic) substrates and pre-processed CMOS chips. In this way, the limit of detection can be improved by means of bettering the sensitivity or reducing the noise. We also report on novel fields of application of GMR sensors by the recapitulation of a number of cases of success of their integration with different heterogeneous complementary elements. We finally describe three fully functional systems, two of them in the bio-technology world, as the proof of how the integrability has been instrumental in the meteoric development of GMR sensors and their applications.
Nosocomial or hospital‐acquired infections (HAIs) have a major impact on mortality worldwide. Enterococcus and Staphylococcus are among the leading causes of HAIs and thus are important pathogens to ...control mainly due to their increased antibiotic resistance. The gold‐standard diagnostic methods for HAIs are time‐consuming, which hinders timely and adequate treatment. Therefore, the development of fast and accurate diagnostic tools is an urgent demand. In this study, we combined the sensitivity of magnetoresistive (MR) sensors, the portability of a lab‐on‐chip platform, and the specificity of phage receptor binding proteins (RBPs) as probes for the rapid and multiplex detection of Enterococcus and Staphylococcus. For this, bacterial cells were firstly labelled with magnetic nanoparticles (MNPs) functionalized with RBPs and then measured on the MR sensors. The results indicate that the RBP‐MNPS provided a specific individual and simultaneous capture of more than 70% of Enterococcus and Staphylococcus cells. Moreover, high signals from the MR sensors were obtained for these samples, providing the detection of both pathogens at low concentrations (10 CFU/ml) in less than 2 h. Overall, the lab‐on‐chip MR platform herein presented holds great potential to be used as a point‐of‐care for the rapid, sensitive and specific multiplex diagnosis of bacterial infections.
A rapid and multiplex detection of nosocomial pathogens on a magnetoresistive (MR) lab‐on‐chip platform is described. For this, we combined the sensitivity of MR sensors, the portability of a lab‐on‐chip platform and the specificity of two phage receptor binding proteins (RBPs) as probes for Enterococcus and Staphylococcus. The cells were firstly labelled with magnetic nanoparticles functionalized with RBPs and, subsequently, recognized by RBPs immobilized on the chip where sensors detected simultaneously both pathogens from 10 CFU/mL in less than 2 h.
The sensitivity of tunneling magnetoresistance sensors is an important performance parameter. It depends on the derivative of resistance versus magnetic field (transfer curve) and the current and is ...expressed as the product of the two factors. Previous research has demonstrated that the bias voltage has a significant impact on the sensitivity. However, no research has been conducted into the dependence of current and the derivative on bias voltage magnitude and polarity, and their contribution to the sensitivity. Thus, this paper investigates the dependence of sensitivity, derivative of resistance versus magnetic field curve and current on bias voltage magnitude and polarity in CoFeB/MgO/CoFeB-based tunneling magnetoresistance sensors with weak, strong and no voltage-controlled perpendicular magnetic anisotropy modification. It demonstrates that the sensitivity dependence on bias voltage for sensors with voltage controlled magnetic anisotropy modification showed no saturation up to 1 V. Moreover, the sensitivity asymmetry with respect to bias polarity changed significantly with bias, reaching a ratio of 6.7. Importantly, the contribution of current and the derivative of resistance versus magnetic field curve to the sensitivity showed a crossover. The current dominated the bias dependence of sensitivity below the crossover voltage and the derivative above the voltage. Furthermore, the crossover voltage in sensors without voltage controlled magnetic anisotropy modification did not depend on polarity, whereas in sensors with voltage controlled magnetic anisotropy modification, it appeared at significantly higher voltage under positive than negative polarity.
Propolis, a natural product made by bees with resins and balsams, is known for its complex chemical composition and remarkable bioactivities. In this study, propolis extraction was studied seeking ...extracts with strong bioactivities using less orthodox solvents, with some derived from apiary products. For that, a propolis sample collected from Gerês apiary in 2018 (G18) was extracted by maceration with six different solvents: absolute ethanol, ethanol/water (7:3), honey brandy, mead, propylene glycol and water. The solvent influence on the chemical composition and antioxidant and antimicrobial activities of the extracts was investigated. Antioxidant potential was assessed by the DPPH free-radical-scavenging assay and the antimicrobial activity by the agar dilution method. Chemical composition of the extracts was determined in vitro by three colorimetric assays: total ortho-diphenols, phenolics and flavonoids contents and the LC-MS technique. To our knowledge, this is the first time that solvents such as honey brandy and mead have been studied. Honey brandy showed considerable potential to extract propolis active compounds able to inhibit the growth of bacteria such as the methicillin-sensitive Staphylococcus aureus and Propionibacterium acnes (MIC values of 100 and 200 µg/mL, respectively) and the fungi Candida albicans and Saccharomyces cerevisiae (MIC = 500 µg/mL, for both). Mead extracts displayed high antioxidant capacity (EC50 = 1.63 ± 0.27 µg/mL) and great activity against resistant bacteria such as the methicillin-resistant Staphylococcus aureus and Escherichia coli (MIC = 750 µg/mL, for both). The production of such solvents made from beehive products further promotes a diversification of apiary products and the exploration of new applications using eco-friendly solutions.
A new device architecture using giant magnetoresistive sensors demonstrates the capability to detect very low magnetic fields on the pT range. A combination of vertically packed spin-valve sensors ...with two-dimensional in-plane arrays, connected in series and in parallel, delivers a final detection level of 360 pT/Formula: see text at 10 Hz at room temperature. The device design is supported by an analytical model developed for a vertically packed spin-valve system, which takes into account all magnetic couplings present. Optimization concerning the spacer thickness and sensor physical dimensions depending on the number of pilled up spin-valves is necessary. To push the limits of detection, arrays of a large number of sensing elements (up to 440,000) are patterned with a geometry that improves sensitivity and in a configuration that reduces the resistance, leading to a lower noise level. The final device performance with pT detectivity is demonstrated in an un-shielded environment suitable for detection of bio-signals.
The main purpose of the paper is to show how a magnetoresistive (MR) element can work as a current sensor instead of using a Wheatstone bridge composed by four MR elements, defining the concept of a ...magnetoresistive shunt (MR-shunt). This concept is reached by considering that once the MR element is biased at a constant current, the voltage drop between its terminals offers information, by the MR effect, of the current to be measured, as happens in a conventional shunt resistor. However, an MR-shunt has the advantage of being a non-dissipative shunt since the current of interest does not circulate through the material, preventing its self-heating. Moreover, it provides galvanic isolation. First, we propose an electronic circuitry enabling the utilization of the available MR sensors integrated into a Wheatstone bridge as sensing elements (MR-shunt). This circuitry allows independent characterization of each of the four elements of the bridge. An independently implemented MR element is also analyzed. Secondly, we propose an electronic conditioning circuit for the MR-shunt, which allows both the bridge-integrated element and the single element to function as current sensors in a similar way to the sensing bridge. Third, the thermal variation in the sensitivity of the MR-shunt, and its temperature coefficient, are obtained. An electronic interface is proposed and analyzed for thermal drift compensation of the MR-shunt current sensitivity. With this hardware compensation, temperature coefficients are experimentally reduced from 0.348%/°C without compensation to -0.008%/°C with compensation for an element integrated in a sensor bridge and from 0.474%/°C to -0.0007%/°C for the single element.
Natural products, like propolis, have been subject of interest by several industries mainly due to their biological activities. However, besides being produced in low amounts propolis has a great ...variability in terms of chemical composition and bioactivities' profiles, constituting a problem for the development of propolis-based products and for its acceptance by the medical community. The aim of this work relates to the study of the bioactivities, in particular the antioxidant and the antimicrobial properties, as well as the chemical characterization of Portuguese propolis samples collected in an apiary sited at Gerês (G) along four consecutive years. Ethanol extracts of the four propolis samples (G.EEs) display antimicrobial activity, especially against Gram-positive spore forming bacteria. Antioxidant activity, evaluated by three different in vitro assays, was confirmed in vivo by flow cytometry using Saccharomyces cerevisiae as eukaryotic cell model. Cells incubated with G.EEs prior to H2O2 incubation, or incubated with G.EEs and H2O2 simultaneously, display higher viability than cells incubated only with H2O2, suggesting that G.EEs protect yeast cells against induced oxidative stress. All tested propolis samples exhibit very similar antimicrobial and antioxidant activities. Chemical analysis of G.EEs revealed no significant differences in terms of phenolic profiles, namely in the compounds to which propolis bioactivities are ascribed, thus supporting the more constant behavior evidenced by these propolis samples. This work highlights the valuable properties of this bee product and reveals a constancy of bioactivities in a Portuguese propolis sample over four years, raising awareness to the potentialities of this natural product often regarded as a beekeeping waste.
Display omitted
•Antibacterial activity is shown by all four propolis samples.•Specific spectrum of action was found against gram-positive spore forming bacteria.•All propolis samples show good antioxidant activity both in vitro and in vivo.•Propolis samples exhibit similar biological activities over four years.•Similarities in chemical profiles confirm the constancy of bioactivities.
Advances in the magnetic sensing technology have been driven by the increasing demand for the capability of measuring ultrasensitive magnetic fields. Among other emerging applications, the detection ...of magnetic fields in the picotesla range is crucial for biomedical applications. In this work Picosense reports a millimeter-scale, low-power hybrid magnetoresistive-piezoelectric magnetometer with subnanotesla sensitivity at low frequency. Through an innovative noise-cancelation mechanism, the 1/f noise in the MR sensors is surpassed by the mechanical modulation of the external magnetic fields in the high frequency regime. A modulation efficiency of 13% was obtained enabling a final device's sensitivity of ~950 pT/Hz
at 1 Hz. This hybrid device proved to be capable of measuring biomagnetic signals generated in the heart in an unshielded environment. This result paves the way for the development of a portable, contactless, low-cost and low-power magnetocardiography device.
Magnetoresistive (MR) sensors have been identified as promising candidates for the development of high-performance magnetometers due to their high sensitivity, low cost, low power consumption, and ...small size. The rapid advance of MR sensor technology has opened up a variety of MR sensor applications. These applications are in different areas that require MR sensors with different properties. Future MR sensor development in each of these areas requires an overview and a strategic guide. An MR sensor roadmap (non-recording applications) was therefore developed and made public by the Technical Committee of the IEEE Magnetics Society with the aim to provide an research and development (R&D) guide for MR sensors intended to be used by industry, government, and academia. The roadmap was developed over a three-year period and coordinated by an international effort of 22 taskforce members from ten countries and 17 organizations, including universities, research institutes, and sensor companies. In this paper, the current status of MR sensors for non-recording applications was identified by analyzing the patent and publication statistics. As a result, timescales for MR sensor development were established and critical milestones for sensor parameters were extracted in order to gain insight into potential MR sensor applications (non-recording). Five application areas were identified, and five MR sensor roadmaps were established. These include biomedical applications, flexible electronics, position sensing and human-computer interactions, non-destructive evaluation and monitoring, and navigation and transportation. Each roadmap was analyzed using a logistic growth model, and new opportunities were predicted based on the extrapolated curve, forecast milestones, and professional judgment of the taskforce members. This paper provides a framework for MR sensor technology (non-recording applications) to be used for public and private R&D planning, in order to provide guidance into likely MR sensor applications, products, and services expected in the next 15 years and beyond.
Biosensors for On-Farm Diagnosis of Mastitis Martins, Sofia A M; Martins, Verónica C; Cardoso, Filipe A ...
Frontiers in bioengineering and biotechnology,
07/2019, Letnik:
7
Journal Article
Recenzirano
Odprti dostop
Bovine mastitis is an inflammation of the mammary gland caused by a multitude of pathogens with devastating consequences for the dairy industry. Global annual losses are estimated to be around €30 bn ...and are caused by significant milk losses, poor milk quality, culling of chronically infected animals, and occasional deaths. Moreover, mastitis management routinely implies the administration of antibiotics to treat and prevent the disease which poses serious risks regarding the emergence of antibiotic resistance. Conventional diagnostic methods based on somatic cell counts (SCC) and plate-culture techniques are accurate in identifying the disease, the respective infectious agents and antibiotic resistant phenotypes. However, pressure exists to develop less lengthy approaches, capable of providing on-site information concerning the infection, and in this way, guide, and hasten the most adequate treatment. Biosensors are analytical tools that convert the presence of biological compounds into an electric signal. Benefitting from high signal-to-noise ratios and fast response times, when properly tuned, they can detect the presence of specific cells and cell markers with high sensitivity. In combination with microfluidics, they provide the means for development of automated and portable diagnostic devices. Still, while biosensors are growing at a fast pace in human diagnostics, applications for the veterinary market, and specifically, for the diagnosis of mastitis remain limited. This review highlights current approaches for mastitis diagnosis and describes the latest outcomes in biosensors and lab-on-chip devices with the potential to become real alternatives to standard practices. Focus is given to those technologies that, in a near future, will enable for an on-farm diagnosis of mastitis.