The precise control over the interaction between cells and the surface of materials plays a crucial role in optimizing the integration of implanted biomaterials. In this regard, material surface with ...controlled topographic features at the micro- and nano-scales has been proved to affect the overall cell behavior and therefore the final osseointegration of implants. Within this context, femtosecond (fs) laser micro/nano machining technology was used in this work to modify the surface structure of stainless steel aiming at controlling cell adhesion and migration. The experimental results show that cells tend to attach and preferentially align to the laser-induced nanopatterns oriented in a specific direction. Accordingly, the laser-based fabrication method here described constitutes a simple, clean, and scalable technique which allows a precise control of the surface nano-patterning process and, subsequently, enables the control of cell adhesion, migration, and polarization. Moreover, since our surface-patterning approach does not involve any chemical treatments and is performed in a single step process, it could in principle be applied to most metallic materials.
•Femtosecond laser treatment to achieve highly hydrophobic behavior on stainless steel.•Combination of micro-machined patterns with LIPSS into hierarchical structures.•Contact angles as high as 156° ...with only the femtosecond laser irradiation.
In this work we have developed hierarchical structures that consist of micro-patterned surfaces covered by nanostructures with a femtosecond laser. The first part of this work is a study to determine the microscale modifications produced on a stainless steel alloy (AISI304) surface at high pulse energy, different velocities, and number of overscans in order to obtain microstructures with a selected depth of around 10μm and line widths of 20μm. The second part of the work is focused on finding the optimal irradiation parameters to obtain the nanostructure pattern. Nanostructures have been defined by means of Laser Induced Periodical Surface Structures (LIPSS) around 250nm high and a period of 580nm, which constitute the nanostructure pattern. Finally, dual scale gratings of 50mm2 were fabricated with different geometries and their effect on the measured contact angle. Combining the micro-pattern with the LIPSS nano-pattern, highly hydrophobic surfaces have been developed with measured static contact angles higher than 150° on a stainless steel alloy.
Display omitted
•First demonstration of LIPSS as polarization gratings.•Optical behavior can be modified changing LIPSS morphology in the fabrication process.•Results supported by computational ...modelling of light-LIPSS interaction.•Fast LIPSS generation with a setup based on line-focused beam and imaging system.•Potential applications as reflective waveplates, using a simple, one-step process.
A fast and reliable method for the fabrication of polarization modifying devices using femtosecond laser is reported. A setup based on line focusing is used for the generation of LIPSS on stainless steel, processing at different speeds between 0.8 and 2.4 mm/s with constant energy per pulse of 1.4 mJ. SEM and AFM characterizations of the LIPSS show a progressive increase in period as the processing speed increases, while height remains approximately constant in the studied range. Optical characterization of the devices shows an induced change in the polarization of the reflected beam that varies with the processing speed, which allows a controlled fabrication of these devices.
We demonstrate a rapid, accurate, and convenient method for tailoring the optical properties of diamond surfaces by employing laser induced periodic surface structuring (LIPSSs). The characteristics ...of the fabricated photonic surfaces were adjusted by tuning the laser wavelength, number of impinging pulses, angle of incidence and polarization state. Using Finite Difference Time Domain (FDTD) modeling, the optical transmissivity and bandwidth was calculated for each fabricated LIPSSs morphology. The highest transmission of ~99.5% was obtained in the near-IR for LIPSSs structures with aspect ratios of the order of ~0.65. The present technique enabled us to identify the main laser parameters involved in the machining process, and to control it with a high degree of accuracy in terms of structure periodicity, morphology and aspect ratio. We also demonstrate and study the conditions for fabricating spatially coherent nanostructures over large areas maintaining a high degree of nanostructure repeatability and optical performance. While our experimental demonstrations have been mainly focused on diamond anti-reflection coatings and gratings, the technique can be easily extended to other materials and applications, such as integrated photonic devices, high power diamond optics, or the construction of photonic surfaces with tailored characteristics in general.
A diffractive optical element was fabricated by monolithically integrating two volume phase-gratings (VPGs) in the bulk of a single-piece transparent material. A computer model of the diffraction ...generated by the double volume phase-grating (DVPG) was made with a rigorous coupled wave analysis simulator. Simulations and experiments show that the diffractive behavior of a DVPG can be controlled by arranging the relative displacement and the distance between the VPGs according to Talbot self-imaging planes. In order to diffract the total incident light, the phase accumulation in the VPGs has to be π/2, which was achieved by single-scan femtosecond laser processing of a nanocrystal doped glass as the substrate material. Ex situ microscope images of the cross-sections are presented for laser processed lines in the form of VPGs and DVPGs. The far-field diffraction of DVPGs formed by selectively located VPGs was characterized with a monochromatic 633 nm and a supercontinuum white light. Functional designs of high diffraction efficiency with potential applications in photonics were successfully fabricated in a one-step and free of chemicals process.
Ultrafast laser inscription of volume phase gratings with low index contrast and self-images with visibility of 0.96 is demonstrated. It is also demonstrated that phase differences of π/2 for visible ...light are achievable with only one layer of structures induced in bulk borosilicate glass by direct laser writing. The fabrication method avoids the stitching of several layers of structures and significantly reduces the time of process. The increment of visibility with the induced phase difference is proved and results are compared with the expected for planar phase gratings.
Laser-Induced Periodic Surface Structures (LIPSS) manufacturing is a convenient laser direct-writing technique for the fabrication of nanostructures with adaptable characteristics on the surface of ...virtually any material. In this paper, we study the influence of 1D laser wavefront curvature on nanoripples spatial regularity, by irradiating stainless steel with a line-focused ultrafast laser beam emitting 120 fs pulses at a wavelength of 800 nm and with 1 kHz repetition rate. We find high correlation between the spatial regularity of the fabricated nanostructures and the wavefront characteristics of the laser beam, with higher regularity being found with quasi-plane-wave illumination. Our results provide insight regarding the control of LIPSS regularity, which is essential for industrial applications involving the LIPSS generation technique.