Thermal analysis of heat-generating battery pack cooled by several coolants is analyzed numerically. The coolant used are gases, oils, thermal oils, nanofluids, and liquid metals to find the best ...coolant for temperature distribution. The conductivity ratio between the battery and coolant, flow Reynolds number, and heat generation inside the pack is varied for each coolant. The axial temperature variation, which provides the location and magnitude of maximum temperature, is studied. The maximum temperature of the battery pack is analyzed using response surface methodology, optimization of maximum temperature is performed using particle swarm optimization algorithm, and regression analysis is carried out at the end of this work. The thermal analysis carried out reveals that the gas coolants are inefficient in providing lower temperatures while nanofluids are most suitable. The response surface reveals that the maximum temperature behavior is different for each category of coolant.
The use of Li-ion battery in electric vehicles is becoming extensive in the modern-day world owing to their high energy density and longer life. But there is a concern of proper thermal management to ...have consistent performance. Therefore, proper cooling mechanism to have a good life and reliability on the battery system is necessary. The main objective of this analysis is to assess the maximum temperature that causes thermal runaway when the battery pack is cooled by several fluids. Five categories of coolants are passed over the heat-generating battery pack to extract the heat and keep the temperature in the limit. Different kinds of gases, conventional oils, thermal oils, nanofluids, and liquid metals are adopted as coolants in each category. This analysis is a novel study which considers different categories of coolant and conjugate heat transfer condition at the battery pack and coolant interface. In each group of coolant, five types of fluids are selected and analyzed to obtain the least maximum temperature of battery. The flow Reynolds number (Re), heat generation (
Q
gen
), and conductivity ratio (Cr) are other parameters considered for the analysis. The Nusselt number for air and water as coolant with increase in Re is studied separately at the end. The maximum temperature is found to increase with
Q
gen
and decrease for Re and Cr. Thermal oils, nanofluids, and liquid metals are found to provide maximum temperature in the same range of 0.62 to 0.54. At the same time, gases have nearly the same effect at different values of Re and Cr.
Curculigo latifolia (family Amaryllidaceae) is used empirically for medicinal purposes. It is distributed throughout Asian countries, especially Indonesia. This study aimed at standardizing the C. ...latifolia plant, analyzing its phytochemical profile, and evaluating its pharmacological effects. The powder from each organ (root, stem, and leaves) was standardized organoleptically and microscopically. Samples were extracted by graded maceration using hexane, ethyl acetate, and ethanol. The extracts were determined for total phenolic content (TPC) and total flavonoid content (TFC). Antioxidant (radical scavenging and metal ion reduction) and antityrosinase activities were determined by spectrophotometric methods. Extracts were analysed for phytochemical profiles by LC-ESI-MS. The highest TPC and TFC were found in the ethanolic extract of the root organ (68.63 ± 2.97 mg GAE/g) and the ethyl acetate extract of the stem (14.33 ± 0.71 mg QE/g extract). High antioxidant activities were found in the ethanolic root extract (20.42 ± 0.33 µg/mL) and ethanolic stem extract (45.65 ± 0.77 µg/mL) by DPPH• and NO• assays, respectively. The ion reduction activity (by CUPRAC assay) was most significant in the ethyl acetate stem extract (390.42 ± 14.49 µmol GAEAC/g extract). Ethanolic root extract was the most active in inhibiting tyrosinase (IC50 value of 108.5 µg/mL). The correlation matrix between TPC and antioxidant activities showed a moderate to robust correlation, whereas the TPC and antityrosinase activity showed a robust correlation. The TFC and antioxidant or antityrosinase activities showed a weak to moderate correlation. The LC-ESI-MS data identified major phenols in the active extracts, including methyl 3-hydroxy-4-methoxy-benzoate, quercetin, 4-O-caffeoylquinic acid-1, and curculigoside. Overall, this study suggests that extracts from the C. latifolia plant offer potent antioxidant and antityrosinase activities, allowing them to be used as natural antioxidants and candidates for skin-lightening compounds.
Numerous therapeutic compounds have been isolated from naturally abundant organic resources, which may offer economical and sustainable sources of compounds with safe and efficacious biological ...activities. In the cosmetics industry, natural compounds with anti-aging activities are eagerly sought. Thus, we prepared various extracts from Rubus fraxinifolius leaves and used enzyme inhibition assays to isolate compounds with protective effects against skin aging. Two triterpenoids were isolated from Rubus fraxinifolius Poir. leaves. The structures were characterized by spectroscopic analyses (LC-ESI-MS, 1D/2D NMR) and comparison to reported data. Compound 1 and 2 were determined as 2,3-O-ethyleneglycol, 19-hydroxyurs-12-en-23,28-dioic acid and 2,3-O-propanediol,19-hydroxyurs-12-en-28-oic acid. Methanol extract and isolates were assessed for their inhibitory effects on elastase and tyrosinase. Compounds 1 and 2 inhibited elastase with IC
122.199 µg/mL and 98.22 µg/mL, and also inhibited tyrosinase with IC
207.79 µg/mL and 221.51 µg/mL, respectively. The molecular docking proved that both compounds have affinities toward the enzymes.
Countries globally are focusing on alternative fuels to reduce the environmental pollution. An example is biodiesel fuel, which is leading the way to other technologies. In this research, the methyl ...esters of castor oil were prepared using a two-step transesterification process. The respective properties of the castor oil (Ricinus Communis) biodiesel were estimated using ASTM standards. The effect of performance and emission on diesel engines was noted for four various engine loads (25, 50, 75, and 100%), with two different blends (B5 and B20) and at two different engine speeds (1500 and 2000 rpm). The study determined that B5 and B20 samples at 1500 rpm engine speed obtained the same power, but diesel fuel generated greater control. The power increased at 2000 rpm for B5 samples, but B20 samples, as well as diesel, were almost the same values. In the 40–80% range, load and load values were entirely parallel for each load observed from the engine performance of the brake power in all samples.
Curculigo latifolia is a plant in the Hypoxidaceae family commonly used in herbal medicine. The study objective was to evaluate the antioxidant and anti-elastase properties of C. latifolia extracts ...in vitro and silico as a candidate for antiaging active ingredients. This study identified secondary metabolites of the hexane (HE), ethyl acetate (EAE), and ethanol extracts (EE) from the root (R), stem (S), and leaf (L) organs by LC-ESI-MS and evaluated in vitro antioxidant and inhibitor elastase activity. An antioxidant evaluation was performed using ABTS, Beta Carotene Bleaching (BCB), and Ferric Reduction Antioxidant Power (FRAP). Evaluation of anti-elastase was carried out using elastase and followed by an in silico study of molecular docking using the target protein elastase (1B0F). Fifteen C. latifolia metabolites were identified in C. latifolia extracts, most of which were phenolic compounds. In antioxidant testing, REE, REAE, SEE, and SEAE extracts showed potent antioxidant activity based on the ABTS, BCB, and FRAP methods. In anti-elastase testing, it was found that SEE, REE, REAE, and RHE extracts gave powerful inhibition of elastase activity (in the ranges of 16.89 to 27.91 µg/mL). The in-silico study demonstrated the potential of the identified metabolites to bind to the target protein 1B0F involved in remodeling the skin aging process. This research concludes that the extracts from C. latifolia have the potential to serve as an active antiaging source.
Abstract This study evaluated Aloe vera extract as a green inhibitor to prevent corrosion in seawater environments. A. vera extract was produced by maceration with methanol–water at room ...temperature. Electrochemical techniques were used to evaluate the corrosion inhibitor effectiveness of the A. vera extract. The morphology of the corrosion products was analyzed by FE-SEM equipped with EDS and AFM. FT-IR and LCMS characterized the functional and structural groups in this extract. The electrochemical measurements show that A. vera extract could effectively reduce the corrosion of API 5L steel in seawater environments. Inhibition efficiency (IE) increases with increasing concentration. Optimal corrosion inhibition efficiency of around 83.75% (PDP) and 88.60% (EIS) was obtained by adding 300 mg L −1 of extract at 310 K. Furthermore, the higher the concentration of A. vera extract, the greater the activation energy (E a ), with the highest activation energy being 48.24 kJ mol −1 for the concentration of 300 mg L −1 . Conversely, increasing the temperature and exposure duration reduces the corrosion inhibition efficiency (IE) values; the best exposure period was 30 min with 88.34% IE by a concentration of 300 mg L −1 at 300 K. This corrosion inhibition is achieved by the adsorption process of A. vera bioactive on metal surfaces with a mixed inhibitor through a physisorption-chemisorption mechanism. This finding was confirmed by the smoother surface morphology of the steel treated with A. vera extract than without. This unveiling investigation found that A. vera extract has the potential to be an environmentally friendly corrosion inhibitor in the seawater environment.