Refractory high-entropy alloys hold the potential for high-temperature applications beyond the capability of the state-of-the-art Ni-based superalloys, and thus, it is important to study their solid ...solution formation characteristics and mechanical properties. In this study, designed by CALPHAD method, formation of as-cast arc-melted body-centered cubic MoNbTaTiV was experimentally verified using X-ray diffraction and scanning electron microscopy. The measured density and lattice parameter for MoNbTaTiV are 9.29g/cm3 and 3.224 Å, which obey the rule of mixtures (ROM). The alloy exhibits high hardness at 443 Hv, high yield strength at 1.4 GPa, and good compressive fracture strength at 2.45 GPa with a fracture strain of ∼30% at room temperature. The yield strength and hardness values of this alloy, and other single-phase refractory high-entropy alloys, are estimated using a simple model of solid solution strengthening. Reasonable agreement between modeling prediction and experiments is obtained. In addition, first-principles density functional theory calculations predict an enthalpy of formation of −0.865 kJ/mol for the MoNbTaTiV alloy, with calculated atomic volume and elastic properties (e.g., bulk and elastic moduli) obeying the ROM.
Display omitted
•MoNbTaTiV exhibits the BCC structure, agreeing with CALPHAD calculations.•Predicted solid solution strengthening agrees well with experiments.•Hardness of BCC high entropy alloys is about three times the yield strength.•Calculated atomic volume and bulk and shear moduli obey the rule of mixtures.
High-Entropy Alloys in Hexagonal Close-Packed Structure Gao, M. C.; Zhang, B.; Guo, S. M. ...
Metallurgical and materials transactions. A, Physical metallurgy and materials science,
07/2016, Letnik:
47, Številka:
7
Journal Article
Recenzirano
Odprti dostop
The microstructures and properties of high-entropy alloys (HEAs) based on the face-centered cubic and body-centered cubic structures have been studied extensively in the literature, but reports on ...HEAs in the hexagonal close-packed (HCP) structure are very limited. Using an efficient strategy in combining phase diagram inspection, CALPHAD modeling, and
ab initio
molecular dynamics simulations, a variety of new compositions are suggested that may hold great potentials in forming single-phase HCP HEAs that comprise rare earth elements and transition metals, respectively. Experimental verification was carried out on CoFeReRu and CoReRuV using X-ray diffraction, scanning electron microscopy, and energy dispersion spectroscopy.
Angioedema is defined as localized and self‐limiting edema of the subcutaneous and submucosal tissue, due to a temporary increase in vascular permeability caused by the release of vasoactive ...mediator(s). When angioedema recurs without significant wheals, the patient should be diagnosed to have angioedema as a distinct disease. In the absence of accepted classification, different types of angioedema are not uniquely identified. For this reason, the European Academy of Allergy and Clinical Immunology gave its patronage to a consensus conference aimed at classifying angioedema. Four types of acquired and three types of hereditary angioedema were identified as separate forms from the analysis of the literature and were presented in detail at the meeting. Here, we summarize the analysis of the data and the resulting classification of angioedema.
This study reports the design and development of ductile and strong refractory single-phase high-entropy alloys (HEAs) for high temperature applications, based on NbTaV with addition of Ti and W. ...Assisted by CALPHAD modeling, a single body-centered cubic solid solution phase was experimentally confirmed in the as-cast ingots using X-ray diffraction and scanning electron microscopy. The observed elemental segregation in each alloy qualitatively agrees with CALPHAD prediction. The Vickers microhardnesses (and yield strengths) of the alloys are about 3 (and 3.5–4.4) times that those estimated from the rule of mixture. While NbTaTiVW shows an impressive yield strength of 1420MPa with fracture strain of 20%, NbTaTiV exhibits exceptional compressive ductility at room temperature.
Gene expression-based profiling of colorectal cancer (CRC) can be used to identify four molecularly homogeneous consensus molecular subtype (CMS) groups with unique biologic features. However, its ...applicability to colorectal premalignant lesions remains unknown.
We assembled the largest transcriptomic premalignancy dataset by integrating different public and proprietary cohorts of adenomatous and serrated polyps from sporadic (N=311) and hereditary (N=78) patient populations and carried out a comprehensive analysis of carcinogenesis pathways using the CMS random forest (RF) classifier.
Overall, transcriptomic subtyping of sporadic and hereditary polyps revealed CMS2 and CMS1 subgroups as the predominant molecular subtypes in premalignancy. Pathway enrichment analysis showed that adenomatous polyps from sporadic or hereditary cases (including Lynch syndrome) displayed a CMS2-like phenotype with WNT and MYC activation, whereas hyperplastic and serrated polyps with CMS1-like phenotype harbored prominent immune activation. Rare adenomas with CMS4-like phenotype showed significant enrichment for stromal signatures along with transforming growth factor-β activation. There was a strong association of CMS1-like polyps with serrated pathology, right-sided anatomic location and BRAF mutations.
Based on our observations made in premalignancy, we propose a model of pathway activation associated with CMS classification in colorectal carcinogenesis. Specifically, while adenomatous polyps are largely CMS2, most hyperplastic and serrated polyps are CMS1 and may transition into other CMS groups during evolution into carcinomas. Our findings shed light on the transcriptional landscape of premalignant colonic polyps and may help guide the development of future biomarkers or preventive treatments for CRC.
Summary Background The vascular and gastrointestinal effects of non-steroidal anti-inflammatory drugs (NSAIDs), including selective COX-2 inhibitors (coxibs) and traditional non-steroidal ...anti-inflammatory drugs (tNSAIDs), are not well characterised, particularly in patients at increased risk of vascular disease. We aimed to provide such information through meta-analyses of randomised trials. Methods We undertook meta-analyses of 280 trials of NSAIDs versus placebo (124 513 participants, 68 342 person-years) and 474 trials of one NSAID versus another NSAID (229 296 participants, 165 456 person-years). The main outcomes were major vascular events (non-fatal myocardial infarction, non-fatal stroke, or vascular death); major coronary events (non-fatal myocardial infarction or coronary death); stroke; mortality; heart failure; and upper gastrointestinal complications (perforation, obstruction, or bleed). Findings Major vascular events were increased by about a third by a coxib (rate ratio RR 1·37, 95% CI 1·14–1·66; p=0·0009) or diclofenac (1·41, 1·12–1·78; p=0·0036), chiefly due to an increase in major coronary events (coxibs 1·76, 1·31–2·37; p=0·0001; diclofenac 1·70, 1·19–2·41; p=0·0032). Ibuprofen also significantly increased major coronary events (2·22, 1·10–4·48; p=0·0253), but not major vascular events (1·44, 0·89–2·33). Compared with placebo, of 1000 patients allocated to a coxib or diclofenac for a year, three more had major vascular events, one of which was fatal. Naproxen did not significantly increase major vascular events (0·93, 0·69–1·27). Vascular death was increased significantly by coxibs (1·58, 99% CI 1·00–2·49; p=0·0103) and diclofenac (1·65, 0·95–2·85, p=0·0187), non-significantly by ibuprofen (1·90, 0·56–6·41; p=0·17), but not by naproxen (1·08, 0·48–2·47, p=0·80). The proportional effects on major vascular events were independent of baseline characteristics, including vascular risk. Heart failure risk was roughly doubled by all NSAIDs. All NSAID regimens increased upper gastrointestinal complications (coxibs 1·81, 1·17–2·81, p=0·0070; diclofenac 1·89, 1·16–3·09, p=0·0106; ibuprofen 3·97, 2·22–7·10, p<0·0001; and naproxen 4·22, 2·71–6·56, p<0·0001). Interpretation The vascular risks of high-dose diclofenac, and possibly ibuprofen, are comparable to coxibs, whereas high-dose naproxen is associated with less vascular risk than other NSAIDs. Although NSAIDs increase vascular and gastrointestinal risks, the size of these risks can be predicted, which could help guide clinical decision making. Funding UK Medical Research Council and British Heart Foundation.
Anthracnose caused by Colletotrichum graminicola (Ces.) G.W. Wils. is an important stalk rot disease in maize (Zea mays L.). The impact of genetic resistance to plant pathogens is extremely important ...from both economic and environmental standpoints. The objectives of this study were to determine if any fitness costs were associated with the Rcg1 locus that confers resistance to C. graminicola in maize and to determine the effect of Rcg1 on grain yield in the presence of disease. Near-isogenic hybrids (NIHs), created by crossing B73Ht and Mo17Ht with near-isogenic lines (NILs) DE811 and DE811ASR(BC5), were evaluated under three treatment regimes: inoculation with C. graminicola, inoculation with water (wounding), and no inoculation. The experiment was conducted in a replicated split-split-plot design at six locations. Results indicate that the NIL DE811ASR(BC5) does not cause significant negative effects in hybrid combinations for most agronomic traits compared to hybrids made with the recurrent parent, DE811, and that there was no apparent fitness cost associated with Rcg1 in uninoculated or wounded treatments. The presence of Rcg1 reduced the overall yield impact incurred by infection in inoculated plots by almost three fold in comparison to the NIHs that lack the gene. These results, in addition to the asexual life cycle and limited variability of C. graminicola, imply that Rcg1 may be a durable resistance locus.
Solving Recent Challenges for Wrought Ni-Base Superalloys Hardy, M. C.; Detrois, M.; McDevitt, E. T. ...
Metallurgical and materials transactions. A, Physical metallurgy and materials science,
06/2020, Letnik:
51, Številka:
6
Journal Article
Recenzirano
Odprti dostop
This paper reviews the status of technology in design and manufacture of new wrought polycrystalline Ni-base superalloys for critical engineering applications. There is a strong motivation to develop ...new alloys that are capable of operating at higher temperatures to realize improvements in thermal efficiency, which are necessary to achieve environmental targets for reduced emissions of harmful green-house gases. From the aerospace sector, the development of new powder metallurgy and ingot metallurgy alloys is discussed for disk rotor and static applications. New compositions for powder metallurgy contain about 50 to 55 pct of gamma prime (
γ
′) strengthening precipitates to ensure components operate successfully at temperatures up to 788 °C (1450 °F). In contrast, new compositions for ingot metallurgy aim to occupy a design space in temperature capability between Alloy 718 and current powder alloys that are in-service, and show levels of
γ
′ of about 30 to 44 pct. The focus in developing these alloys was design for manufacturability. To complement the aerospace developments, a review of work to understand the suitability of candidate alloys for multiple applications in Advanced-Ultra Supercritical (AUSC) power plants has been undertaken by Detrois, Jablonski, and Hawk from the National Energy Technology Laboratory. In these power plants, steam temperatures are required to reach 700 °C to 760 °C. The common thread is to develop alloys that demonstrate a combination of high-temperature properties, which are reliant on both the alloy composition and microstructure and can be produced readily at the right price. For the AUSC applications, the emphasis is on high-temperature strength, long-term creep life, phase stability, oxidation resistance, and robust welding for fabrications. Whereas for powder disk rotors in aircraft engines, the priority is enhanced resistance to time-dependent crack growth, phase stability, and resistance to environmental damage, while extending the current strength levels, which are shown by existing alloys, to higher temperatures.
With an interest in moving from steam to supercritical CO2 as the working fluid in advanced energy systems, it is important to study the mechanical response of structural alloys to CO2-containing ...environments. MARBN-type 9Cr martensitic steel was originally developed for application in boilers for supercritical and ultra-supercritical power plants where the steam temperature reaches 650 °C. In this research, a MARBN-type 9Cr martensitic steel designed and manufactured at NETL was creep tested in a gaseous CO2 environment (i.e., 0.1 MPa at 650 °C), and the results are directly compared to creep tests conducted in air. It was found that environmentally-assisted cracking facilitated by carbide formation beneath the growing oxide accelerated failure in gaseous CO2. This work indicates that creep-oxidation interactions in advanced martensitic steels represent an important consideration for materials selection in supercritical CO2 power cycles. Furthermore, this work confirms that more oxidation-resistant alloys will be required for the highest temperature portions of these systems.
•MARBN 9%Cr steel was creep tested in CO2 and air environments•CO2 environment severely reduced creep life•A complex interaction between carburization and environmentally assisted cracking was responsible for the creep detriment
This report presents a design methodology for refractory high-entropy alloys with a body-centered cubic (bcc) structure using select empirical parameters (i.e., enthalpy of mixing, atomic size ...difference, Ω-parameter, and electronegativity difference) and CALPHAD approach. Sixteen alloys in equimolar compositions ranging from quinary to ennead systems were designed with experimental verification studies performed on two alloys using x-ray diffraction, energy-dispersive spectroscopy, and scanning electron microscopy. Two bcc phases were identified in the as-cast HfMoNbTaTiVZr, whereas multiple phases formed in the as-cast HfMoNbTaTiVWZr. Observed elemental segregation in the alloys qualitatively agrees with CALPHAD prediction. Comparisons of the thermodynamic mixing properties for liquid and bcc phases using the Miedema model and CALPHAD are presented. This study demonstrates that CALPHAD is more effective in predicting HEA formation than empirical parameters, and new single bcc HEAs are suggested: HfMoNbTiZr, HfMoTaTiZr, NbTaTiVZr, HfMoNbTaTiZr, HfMoTaTiVZr, and MoNbTaTiVZr.
PDF
