Penicillium is a diverse genus occurring worldwide and its species play important roles as decomposers of organic materials and cause destructive rots in the food industry where they produce a wide ...range of mycotoxins. Other species are considered enzyme factories or are common indoor air allergens. Although DNA sequences are essential for robust identification of Penicillium species, there is currently no comprehensive, verified reference database for the genus. To coincide with the move to one fungus one name in the International Code of Nomenclature for algae, fungi and plants, the generic concept of Penicillium was re-defined to accommodate species from other genera, such as Chromocleista, Eladia, Eupenicillium, Torulomyces and Thysanophora, which together comprise a large monophyletic clade. As a result of this, and the many new species described in recent years, it was necessary to update the list of accepted species in Penicillium. The genus currently contains 354 accepted species, including new combinations for Aspergillus crystallinus, A. malodoratus and A. paradoxus, which belong to Penicillium section Paradoxa. To add to the taxonomic value of the list, we also provide information on each accepted species MycoBank number, living ex-type strains and provide GenBank accession numbers to ITS, β-tubulin, calmodulin and RPB2 sequences, thereby supplying a verified set of sequences for each species of the genus. In addition to the nomenclatural list, we recommend a standard working method for species descriptions and identifications to be adopted by laboratories working on this genus.
MicroRNAs (miRNAs) have been shown to be major regulators of eukaryotic gene expression. However, bacterial RNAs comparable in size to eukaryotic miRNAs (18–22 nucleotides) have received little ...attention. Recently, a novel class of small RNAs similar in size to miRNAs (miRNA-size, small RNAs or msRNAs) have also been found in several bacteria. Like miRNAs, msRNAs are approximately 15 to 25 nucleotides in length, and their precursors are predicted to form a hairpin loop secondary structure. Here, we identified msRNAs in the periodontal pathogens Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, and Treponema denticola. We examined these msRNAs using a deep sequencing method and characterized dozens of msRNAs through bioinformatic analysis. Highly expressed msRNAs were selected for further validation. The findings suggest that this class of small RNAs is well conserved across the domains of life. Indeed, msRNAs secreted via bacterial outer membrane vesicles (OMVs) were detected. The ability of bacterial OMVs to deliver RNAs into eukaryotic cells was also observed. These msRNAs in OMVs allowed us to identify their potential human immune-related target genes. Furthermore, we found that exogenous msRNAs could suppress expression of certain cytokines in Jurkat T cells. We propose msRNAs may function as novel bacterial signaling molecules that mediate bacteria-to-human interactions. Furthermore, this study may provide fresh insight into bacterial pathogenic mechanisms of periodontal diseases.
Aspergillus comprises a diverse group of species based on morphological, physiological and phylogenetic characters, which significantly impact biotechnology, food production, indoor environments and ...human health. Aspergillus was traditionally associated with nine teleomorph genera, but phylogenetic data suggest that together with genera such as Polypaecilum, Phialosimplex, Dichotomomyces and Cristaspora, Aspergillus forms a monophyletic clade closely related to Penicillium. Changes in the International Code of Nomenclature for algae, fungi and plants resulted in the move to one name per species, meaning that a decision had to be made whether to keep Aspergillus as one big genus or to split it into several smaller genera. The International Commission of Penicillium and Aspergillus decided to keep Aspergillus instead of using smaller genera. In this paper, we present the arguments for this decision. We introduce new combinations for accepted species presently lacking an Aspergillus name and provide an updated accepted species list for the genus, now containing 339 species. To add to the scientific value of the list, we include information about living ex-type culture collection numbers and GenBank accession numbers for available representative ITS, calmodulin, β-tubulin and RPB2 sequences. In addition, we recommend a standard working technique for Aspergillus and propose calmodulin as a secondary identification marker.
Aflatoxins and ochratoxins are among the most important mycotoxins of all and producers of both types of mycotoxins are present in Aspergillus section Flavi, albeit never in the same species. Some of ...the most efficient producers of aflatoxins and ochratoxins have not been described yet. Using a polyphasic approach combining phenotype, physiology, sequence and extrolite data, we describe here eight new species in section Flavi. Phylogenetically, section Flavi is split in eight clades and the section currently contains 33 species. Two species only produce aflatoxin B1 and B2 (A. pseudotamarii and A. togoensis), and 14 species are able to produce aflatoxin B1, B2, G1 and G2: three newly described species A. aflatoxiformans, A. austwickii and A. cerealis in addition to A. arachidicola, A. minisclerotigenes, A. mottae, A. luteovirescens (formerly A. bombycis), A. nomius, A. novoparasiticus, A. parasiticus, A. pseudocaelatus, A. pseudonomius, A. sergii and A. transmontanensis. It is generally accepted that A. flavus is unable to produce type G aflatoxins, but here we report on Korean strains that also produce aflatoxin G1 and G2. One strain of A. bertholletius can produce the immediate aflatoxin precursor 3-O-methylsterigmatocystin, and one strain of Aspergillus sojae and two strains of Aspergillus alliaceus produced versicolorins. Strains of the domesticated forms of A. flavus and A. parasiticus, A. oryzae and A. sojae, respectively, lost their ability to produce aflatoxins, and from the remaining phylogenetically closely related species (belonging to the A. flavus-, A. tamarii-, A. bertholletius- and A. nomius-clades), only A. caelatus, A. subflavus and A. tamarii are unable to produce aflatoxins. With exception of A. togoensis in the A. coremiiformis-clade, all species in the phylogenetically more distant clades (A. alliaceus-, A. coremiiformis-, A. leporis- and A. avenaceus-clade) are unable to produce aflatoxins. Three out of the four species in the A. alliaceus-clade can produce the mycotoxin ochratoxin A: A. alliaceus s. str. and two new species described here as A. neoalliaceus and A. vandermerwei. Eight species produced the mycotoxin tenuazonic acid: A. bertholletius, A. caelatus, A. luteovirescens, A. nomius, A. pseudocaelatus, A. pseudonomius, A. pseudotamarii and A. tamarii while the related mycotoxin cyclopiazonic acid was produced by 13 species: A. aflatoxiformans, A. austwickii, A. bertholletius, A. cerealis, A. flavus, A. minisclerotigenes, A. mottae, A. oryzae, A. pipericola, A. pseudocaelatus, A. pseudotamarii, A. sergii and A. tamarii. Furthermore, A. hancockii produced speradine A, a compound related to cyclopiazonic acid. Selected A. aflatoxiformans, A. austwickii, A. cerealis, A. flavus, A. minisclerotigenes, A. pipericola and A. sergii strains produced small sclerotia containing the mycotoxin aflatrem. Kojic acid has been found in all species in section Flavi, except A. avenaceus and A. coremiiformis. Only six species in the section did not produce any known mycotoxins: A. aspearensis, A. coremiiformis, A. lanosus, A. leporis, A. sojae and A. subflavus. An overview of other small molecule extrolites produced in Aspergillus section Flavi is given.
CoCrFeMnNi high-entropy alloy (HEA) materials were fabricated using mechanical alloying (MA) and spark plasma sintering (SPS). The MA time, SPS temperature, and contaminations strongly affected the ...final microstructure and mechanical properties. Nanocrystal face-centered cubic (FCC) solid solution was made during MA, and the FCC phase maintained as the matrix after SPS at 900 °C and 1100 °C. However, Cr carbides were transformed near the surface due to the carbon contamination. When MA time increased, phase stability of the FCC phase was improved, and the contaminant (ZrO2) from the MA balls was also increased. Ultrafine-grained microstructure was obtained at 60 min MA and 900 °C SPS. On the other hand, the higher SPS temperature and lower levels of contamination were required to achieve tensile ductility. Irregularly distributed ZrO2 particles developed bimodal microstructures.
Display omitted
•CoCrFeMnNi high-entropy alloys were fabricated using powder metallurgy.•Contaminations highly affected microstructural evolution and mechanical properties.•Phase stability was improved with increasing ball milling time.•UFG microstructure was obtained under a certain condition.
The genetic correlation describes the genetic relationship between two traits and can contribute to a better understanding of the shared biological pathways and/or the causality relationships between ...them. The rarity of large family cohorts with recorded instances of two traits, particularly disease traits, has made it difficult to estimate genetic correlations using traditional epidemiological approaches. However, advances in genomic methodologies, such as genome-wide association studies, and widespread sharing of data now allow genetic correlations to be estimated for virtually any trait pair. Here, we review the definition, estimation, interpretation and uses of genetic correlations, with a focus on applications to human disease.
Complementary to the genome, the concept of exposome has been proposed to capture the totality of human environmental exposures. While there has been some recent progress on the construction of the ...exposome, few tools exist that can integrate the genome and exposome for complex trait analyses. Here we propose a linear mixed model approach to bridge this gap, which jointly models the random effects of the two omics layers on phenotypes of complex traits. We illustrate our approach using traits from the UK Biobank (e.g., BMI and height for N ~ 35,000) with a small fraction of the exposome that comprises 28 lifestyle factors. The joint model of the genome and exposome explains substantially more phenotypic variance and significantly improves phenotypic prediction accuracy, compared to the model based on the genome alone. The additional phenotypic variance captured by the exposome includes its additive effects as well as non-additive effects such as genome-exposome (gxe) and exposome-exposome (exe) interactions. For example, 19% of variation in BMI is explained by additive effects of the genome, while additional 7.2% by additive effects of the exposome, 1.9% by exe interactions and 4.5% by gxe interactions. Correspondingly, the prediction accuracy for BMI, computed using Pearson's correlation between the observed and predicted phenotypes, improves from 0.15 (based on the genome alone) to 0.35 (based on the genome and exposome). We also show, using established theories, that integrating genomic and exposomic data can be an effective way of attaining a clinically meaningful level of prediction accuracy for disease traits. In conclusion, the genomic and exposomic effects can contribute to phenotypic variation via their latent relationships, i.e. genome-exposome correlation, and gxe and exe interactions, and modelling these effects has a potential to improve phenotypic prediction accuracy and thus holds a great promise for future clinical practice.
For most human complex diseases and traits, SNPs identified by genome-wide association studies (GWAS) explain only a small fraction of the heritability. Here we report a user-friendly software tool ...called genome-wide complex trait analysis (GCTA), which was developed based on a method we recently developed to address the “missing heritability” problem. GCTA estimates the variance explained by all the SNPs on a chromosome or on the whole genome for a complex trait rather than testing the association of any particular SNP to the trait. We introduce GCTA's five main functions: data management, estimation of the genetic relationships from SNPs, mixed linear model analysis of variance explained by the SNPs, estimation of the linkage disequilibrium structure, and GWAS simulation. We focus on the function of estimating the variance explained by all the SNPs on the X chromosome and testing the hypotheses of dosage compensation. The GCTA software is a versatile tool to estimate and partition complex trait variation with large GWAS data sets.
Clogging in permeable concrete: A review Kia, Alalea; Wong, Hong S.; Cheeseman, Christopher R.
Journal of environmental management,
05/2017, Letnik:
193
Journal Article
Recenzirano
Odprti dostop
Permeable concrete (or “pervious concrete” in North America) is used to reduce local flooding in urban areas and is an important sustainable urban drainage system. However, permeable concrete ...exhibits reduction in permeability due to clogging by particulates, which severely limits service life. This paper reviews the clogging mechanism and current mitigating strategies in order to inform future research needs. The pore structure of permeable concrete and characteristics of flowing particulates influence clogging, which occurs when particles build-up and block connected porosity. Permeable concrete requires regular maintenance by vacuum sweeping and pressure washing, but the effectiveness and viability of these methods is questionable. The potential for clogging is related to the tortuosity of the connected porosity, with greater tortuosity resulting in increased potential for clogging. Research is required to develop permeable concrete that can be poured on-site, which produces a pore structure with significantly reduced tortuosity.
•Permeable concrete exhibits a reduction in permeability over time due to clogging.•Effectiveness of remediation techniques is limited for particles within the microstructure.•Potential for clogging is related to tortuosity of connected porosity.•Permeable concrete with significantly reduced pore tortuosity is required.
Background
Recent evidence indicates that Staphylococcus aureus, one of the most important human pathogens, secretes vesicles into the extracellular milieu.
Objective
To evaluate whether inhalation ...of S. aureus‐derived extracellular vesicles (EV) is causally related to the pathogenesis of inflammatory pulmonary diseases.
Methods
Staphylococcus aureus EV were prepared by sequential ultrafiltration and ultracentrifugation. The innate immune response was evaluated in vitro after the application of EV to airway epithelial cells and alveolar macrophages. In vivo innate and adaptive immune responses were evaluated after airway exposure to EV. Adjuvant effects of EV on the development of hypersensitivity to inhaled allergens were also evaluated after airway sensitization with S. aureus EV and ovalbumin (OVA).
Results
Staphylococcus aureus and S. aureus EV were detected in house dust. Alveolar macrophages produced both tumor necrosis α (TNF‐α) and interleukin 6 (IL‐6) after in vitro stimulation with S. aureus EV, whereas airway epithelial cells produced only IL‐6. Repeated airway exposure to S. aureus EV induced both Th1 and Th17 cell responses and neutrophilic pulmonary inflammation, mainly via a Toll‐like receptor 2 (TLR2)‐dependent mechanism. In terms of adjuvant effects, airway sensitization with S. aureus EV and OVA resulted in neutrophilic pulmonary inflammation after OVA challenge alone. This phenotype was partly reversed by the absence of interferon γ (IFN‐γ) or IL‐17.
Conclusion
Staphylococcus aureus EV can induce Th1 and Th17 neutrophilic pulmonary inflammation, mainly in a TLR2‐dependent manner. Additionally, S. aureus EV enhance the development of airway hypersensitivity to inhaled allergens.