This paper reviews and ranks major proposed energy-related solutions to global warming, air pollution mortality, and energy security while considering other impacts of the proposed solutions, such as ...on water supply, land use, wildlife, resource availability, thermal pollution, water chemical pollution, nuclear proliferation, and undernutrition. Nine electric power sources and two liquid fuel options are considered. The electricity sources include solar-photovoltaics (PV), concentrated solar power (CSP), wind, geothermal, hydroelectric, wave, tidal, nuclear, and coal with carbon capture and storage (CCS) technology. The liquid fuel options include corn-ethanol (E85) and cellulosic-E85. To place the electric and liquid fuel sources on an equal footing, we examine their comparative abilities to address the problems mentioned by powering new-technology vehicles, including battery-electric vehicles (BEVs), hydrogen fuel cell vehicles (HFCVs), and flex-fuel vehicles run on E85. Twelve combinations of energy source-vehicle type are considered. Upon ranking and weighting each combination with respect to each of 11 impact categories, four clear divisions of ranking, or tiers, emerge. Tier 1 (highest-ranked) includes wind-BEVs and wind-HFCVs. Tier 2 includes CSP-BEVs, geothermal-BEVs, PV-BEVs, tidal-BEVs, and wave-BEVs. Tier 3 includes hydro-BEVs, nuclear-BEVs, and CCS-BEVs. Tier 4 includes corn- and cellulosic-E85. Wind-BEVs ranked first in seven out of 11 categories, including the two most important, mortality and climate damage reduction. Although HFCVs are much less efficient than BEVs, wind-HFCVs are still very clean and were ranked second among all combinations. Tier 2 options provide significant benefits and are recommended. Tier 3 options are less desirable. However, hydroelectricity, which was ranked ahead of coal-CCS and nuclear with respect to climate and health, is an excellent load balancer, thus recommended. The Tier 4 combinations (cellulosic- and corn-E85) were ranked lowest overall and with respect to climate, air pollution, land use, wildlife damage, and chemical waste. Cellulosic-E85 ranked lower than corn-E85 overall, primarily due to its potentially larger land footprint based on new data and its higher upstream air pollution emissions than corn-E85. Whereas cellulosic-E85 may cause the greatest average human mortality, nuclear-BEVs cause the greatest upper-limit mortality risk due to the expansion of plutonium separation and uranium enrichment in nuclear energy facilities worldwide. Wind-BEVs and CSP-BEVs cause the least mortality. The footprint area of wind-BEVs is 2-6 orders of magnitude less than that of any other option. Because of their low footprint and pollution, wind-BEVs cause the least wildlife loss. The largest consumer of water is corn-E85. The smallest are wind-, tidal-, and wave-BEVs. The US could theoretically replace all 2007 onroad vehicles with BEVs powered by 73 000-144 000 5 MW wind turbines, less than the 300 000 airplanes the US produced during World War, reducing US CO2 by 32.5-32.7% and nearly eliminating 15 000/yr vehicle-related air pollution deaths in 2020. In sum, use of wind, CSP, geothermal, tidal, PV, wave, and hydro to provide electricity for BEVs and HFCVs and, by extension, electricity for the residential, industrial, and commercial sectors, will result in the most benefit among the options considered. The combination of these technologies should be advanced as a solution to global warming, air pollution, and energy security. Coal-CCS and nuclear offer less benefit thus represent an opportunity cost loss, and the biofuel options provide no certain benefit and the greatest negative impacts.
This paper examines the effects on climate and air pollution of open biomass burning (BB) when heat and moisture fluxes, gases and aerosols (including black and brown carbon, tar balls, and ...reflective particles), cloud absorption effects (CAEs) I and II, and aerosol semidirect and indirect effects on clouds are treated. It also examines the climate impacts of most anthropogenic heat and moisture fluxes (AHFs and AMFs). Transient 20 year simulations indicate BB may cause a net global warming of ~0.4 K because CAE I (~32% of BB warming), CAE II, semidirect effects, AHFs (~7%), AMFs, and aerosol absorption outweigh direct aerosol cooling and indirect effects, contrary to previous BB studies that did not treat CAEs, AHFs, AMFs, or brown carbon. Some BB warming can be understood in terms of the anticorrelation between instantaneous direct radiative forcing (DRF) changes and surface temperature changes in clouds containing absorbing aerosols. BB may cause ~250,000 (73,000–435,000) premature mortalities/yr, with >90% from particles. AHFs from all sources and AMFs + AHFs from power plants and electricity use each may cause a statistically significant +0.03 K global warming. Solar plus thermal‐IR DRFs were +0.033 (+0.027) W/m2 for all AHFs globally without (with) evaporating cooling water, +0.009 W/m2 for AMFs globally, +0.52 W/m2 (94.3% solar) for all‐source BC outside of clouds plus interstitially between cloud drops at the cloud relative humidity, and +0.06 W/m2 (99.7% solar) for BC inclusions in cloud hydrometeor particles. Modeled post‐1850 biomass, biofuel, and fossil fuel burning, AHFs, AMFs, and urban surfaces accounted for most observed global warming.
Key Points
Absorbing biomass burning aerosols and heat cause short‐term climate warmingCloud absorption effects warm climate significantly globallyTemperature increases with decreasing forcing for absorbing aerosol in cloud
•Solar PV optimal tilt angles are estimated for all countries of the world.•Tracked and tilted PV increase output over flat panels with increasing latitude.•Yields from 1-axis horizontal tracking ...within 1–3% of 2-axis at most latitudes.•Yields from 1-axis horizontal tracking mostly better than from 1-axis vertical.•O.
This study provides estimates of photovoltaic (PV) panel optimal tilt angles for all countries worldwide. It then estimates the incident solar radiation normal to either tracked or optimally tilted panels relative to horizontal panels globally. Optimal tilts are derived from the National Renewable Energy Laboratory’s PVWatts program. A simple 3rd-order polynomial fit of optimal tilt versus latitude is derived. The fit matches data better above 40° N latitude than do previous linear fits. Optimal tilts are then used in the global 3-D GATOR-GCMOM model to estimate annual ratios of incident radiation normal to optimally tilted, 1-axis vertically tracked (swiveling vertically around a horizontal axis), 1-axis horizontally tracked (at optimal tilt and swiveling horizontally around a vertical axis), and 2-axis tracked panels relative to horizontal panels in 2050. Globally- and annually-averaged, these ratios are ∼1.19, ∼1.22, ∼1.35, and ∼1.39, respectively. 1-axis horizontal tracking differs from 2-axis tracking, annually averaged, by only 1–3% at most all latitudes. 1-axis horizontal tracking provides much more output than 1-axis vertical tracking below 65° N and S, whereas output is similar elsewhere. Tracking provides little benefit over optimal tilting above 75° N and 60° S. Tilting and tracking benefits generally increase with increasing latitude. In fact, annually averaged, more sunlight reach tilted or tracked panels from 80 to 90° S than any other latitude. Tilting and tracking benefit cities of the same latitude with lesser aerosol and cloud cover. In sum, for optimal utility PV output, 1-axis horizontal tracking is recommended, except for the highest latitudes, where optimal tilting is sufficient. However, decisions about panel configuration also require knowing tracking equipment and land costs, which are not evaluated here. Installers should also calculate optimal tilt angles for their location for more accuracy. Models that ignore optimal tilting for rooftop PV and utility PV tracking may underestimate significantly country or world PV potential.
How green is blue hydrogen? Howarth, Robert W.; Jacobson, Mark Z.
Energy science & engineering,
October 2021, 2021-10-00, 20211001, 2021-10-01, Letnik:
9, Številka:
10
Journal Article
Recenzirano
Odprti dostop
Hydrogen is often viewed as an important energy carrier in a future decarbonized world. Currently, most hydrogen is produced by steam reforming of methane in natural gas (“gray hydrogen”), with high ...carbon dioxide emissions. Increasingly, many propose using carbon capture and storage to reduce these emissions, producing so‐called “blue hydrogen,” frequently promoted as low emissions. We undertake the first effort in a peer‐reviewed paper to examine the lifecycle greenhouse gas emissions of blue hydrogen accounting for emissions of both carbon dioxide and unburned fugitive methane. Far from being low carbon, greenhouse gas emissions from the production of blue hydrogen are quite high, particularly due to the release of fugitive methane. For our default assumptions (3.5% emission rate of methane from natural gas and a 20‐year global warming potential), total carbon dioxide equivalent emissions for blue hydrogen are only 9%‐12% less than for gray hydrogen. While carbon dioxide emissions are lower, fugitive methane emissions for blue hydrogen are higher than for gray hydrogen because of an increased use of natural gas to power the carbon capture. Perhaps surprisingly, the greenhouse gas footprint of blue hydrogen is more than 20% greater than burning natural gas or coal for heat and some 60% greater than burning diesel oil for heat, again with our default assumptions. In a sensitivity analysis in which the methane emission rate from natural gas is reduced to a low value of 1.54%, greenhouse gas emissions from blue hydrogen are still greater than from simply burning natural gas, and are only 18%‐25% less than for gray hydrogen. Our analysis assumes that captured carbon dioxide can be stored indefinitely, an optimistic and unproven assumption. Even if true though, the use of blue hydrogen appears difficult to justify on climate grounds.
Blue hydrogen is the production of hydrogen from natural gas combined with carbon capture and storage. Commercial production so far is limited to just two facilities, but blue hydrogen is increasingly being promoted as a green, “low emissions” fuel. Here, we provide the first full lifecycle assessment of emissions from the production of blue hydrogen, including fugitive upstream methane emissions from the natural gas that is used. Far from being low carbon, we find quite large emissions that give blue hydrogen a larger greenhouse gas footprint than any fossil fuel.
This study examines modeled properties of black carbon (BC), tar ball (TB), and soil dust (SD) absorption within clouds and aerosols to understand better Cloud Absorption Effects I and II, which are ...defined as the effects on cloud heating of absorbing inclusions in hydrometeor particles and of absorbing aerosol particles interstitially between hydrometeor particles at their actual relative humidity (RH), respectively. The globally and annually averaged modeled 550 nm aerosol mass absorption coefficient (AMAC) of externally mixed BC was 6.72 (6.3–7.3) m2/g, within the laboratory range (6.3–8.7 m2/g). The global AMAC of internally mixed (IM) BC was 16.2 (13.9–18.2) m2/g, less than the measured maximum at 100% RH (23 m2/g). The resulting AMAC amplification factor due to internal mixing was 2.41 (2–2.9), with highest values in high RH regions. The global 650 nm hydrometeor mass absorption coefficient (HMAC) due to BC inclusions was 17.7 (10.6–19) m2/g, ∼9.3% higher than that of the IM‐AMAC. The 650 nm HMACs of TBs and SD were half and 1/190th, respectively, that of BC. Modeled aerosol absorption optical depths were consistent with data. In column tests, BC inclusions in low and mid clouds (CAE I) gave column‐integrated BC heating rates ∼200% and 235%, respectively, those of interstitial BC at the actual cloud RH (CAE II), which itself gave heating rates ∼120% and ∼130%, respectively, those of interstitial BC at the clear‐sky RH. Globally, cloud optical depth increased then decreased with increasing aerosol optical depth, consistent with boomerang curves from satellite studies. Thus, CAEs, which are largely ignored, heat clouds significantly.
Key Points
Paper defines cloud absorption effects
Cloud heating rate due to BC inclusions exceeds that due to interstitial BC
Provides global MACs in and out of clouds and amplification factors
This study examines the short‐term (∼15 year) effects of controlling fossil‐fuel soot (FS) (black carbon (BC), primary organic matter (POM), and S(IV) (H2SO4(aq), HSO4−, and SO42−)), solid‐biofuel ...soot and gases (BSG) (BC, POM, S(IV), K+, Na+, Ca2+, Mg2+, NH4+, NO3−, Cl− and several dozen gases, including CO2 and CH4), and methane on global and Arctic temperatures, cloudiness, precipitation, and atmospheric composition. Climate response simulations were run with GATOR‐GCMOM, accounting for both microphysical (indirect) and radiative effects of aerosols on clouds and precipitation. The model treated discrete size‐resolved aging and internal mixing of aerosol soot, discrete size‐resolved evolution of clouds/precipitation from externally and internally mixed aerosol particles, and soot absorption in aerosols, clouds/precipitation, and snow/sea ice. Eliminating FS, FS+BSG (FSBSG), and CH4 in isolation were found to reduce global surface air temperatures by a statistically significant 0.3–0.5 K, 0.4–0.7 K, and 0.2–0.4 K, respectively, averaged over 15 years. As net global warming (0.7–0.8 K) is due mostly to gross pollutant warming from fossil‐fuel greenhouse gases (2–2.4 K), and FSBSG (0.4–0.7 K) offset by cooling due to non‐FSBSG aerosol particles (−1.7 to −2.3 K), removing FS and FSBSG may reduce 13–16% and 17–23%, respectively, of gross warming to date. Reducing FS, FSBSG, and CH4 in isolation may reduce warming above the Arctic Circle by up to ∼1.2 K, ∼1.7 K, and ∼0.9 K, respectively. Both FS and BSG contribute to warming, but FS is a stronger contributor per unit mass emission. However, BSG may cause 8 times more mortality than FS. The global e‐folding lifetime of emitted BC (from all fossil sources) against internal mixing by coagulation was ∼3 h, similar to data, and that of all BC against dry plus wet removal was ∼4.7 days. About 90% of emitted FS BC mass was lost to internal mixing by coagulation, ∼7% to wet removal, ∼3% to dry removal, and a residual remaining airborne. Of all emitted plus internally mixed BC, ∼92% was wet removed and ∼8% dry removed, with a residual remaining airborne. The 20 and 100 year surface temperature response per unit continuous emissions (STRE) (similar to global warming potentials (GWPs)) of BC in FS were 4500–7200 and 2900–4600, respectively; those of BC in BSG were 2100–4000 and 1060–2020, respectively; and those of CH4 were 52–92 and 29–63, respectively. Thus, FSBSG may be the second leading cause of warming after CO2. Controlling FS and BSG may be a faster method of reducing Arctic ice loss and global warming than other options, including controlling CH4 or CO2, although all controls are needed.
This is Part II of two papers evaluating the feasibility of providing all energy for all purposes (electric power, transportation, and heating/cooling), everywhere in the world, from wind, water, and ...the sun (WWS). In Part I, we described the prominent renewable energy plans that have been proposed and discussed the characteristics of WWS energy systems, the global demand for and availability of WWS energy, quantities and areas required for WWS infrastructure, and supplies of critical materials. Here, we discuss methods of addressing the variability of WWS energy to ensure that power supply reliably matches demand (including interconnecting geographically dispersed resources, using hydroelectricity, using demand-response management, storing electric power on site, over-sizing peak generation capacity and producing hydrogen with the excess, storing electric power in vehicle batteries, and forecasting weather to project energy supplies), the economics of WWS generation and transmission, the economics of WWS use in transportation, and policy measures needed to enhance the viability of a WWS system. We find that the cost of energy in a 100% WWS will be similar to the cost today. We conclude that barriers to a 100% conversion to WWS power worldwide are primarily social and political, not technological or even economic.
► We evaluate the feasibility of global energy supply from wind, water, and solar energy. ► WWS energy can be supplied reliably and economically to all energy-use sectors. ► The social cost of WWS energy generally is less than the cost of fossil-fuel energy. ► Barriers to 100% WWS power worldwide are socio-political, not techno-economic.
This study addresses the greatest concern facing the large-scale integration of wind, water, and solar (WWS) into a power grid: the high cost of avoiding load loss caused by WWS variability and ...uncertainty. It uses a new grid integrationmodel and finds low-cost, no-load-loss, nonunique solutions to this problem on electrification of all US energy sectors (electricity, transportation, heating/cooling, and industry) while accounting for wind and solar time series data from a 3D global weather model that simulates extreme events and competition among wind turbines for available kinetic energy. Solutions are obtained by prioritizing storage for heat (in soil and water); cold (in ice and water); and electricity (in phase-change materials, pumped hydro, hydropower, and hydrogen), and using demand response. No natural gas, biofuels, nuclear power, or stationary batteries are needed. The resulting 2050–2055 US electricity social cost for a full system is much less than for fossil fuels. These results hold for many conditions, suggesting that low-cost, reliable 100% WWS systems should work many places worldwide.
An important issue today is whether gasoline vehicles should be replaced by flex-fuel vehicles (FFVs) that use ethanol-gasoline blends (e.g., E85), where some carbon dioxide (CO2) from ethanol’s ...production is captured and piped, or battery-electric vehicles (BEVs) powered by wind or solar. This paper compares the options in a case study. It evaluates a proposal to capture fermentation CO2 from 34 ethanol refineries in 5 U.S. states and build an elaborate pipeline to transport the CO2 to an underground storage site. This “ethanol plan” is compared with building wind farms at the same cost to provide electricity for BEVs (“wind plan A”). Compared with the ethanol plan, wind plan A may reduce 2.4–4 times the CO2, save drivers in the five states $40–$66 billion (USD 2023) over 30 years even when BEVs initially cost $21,700 more than FFVs, require 1/400,000th the land footprint and 1/10th–1/20th the spacing area, and decrease air pollution. Even building wind to replace coal (“wind plan B”) may avoid 1.5–2.5 times the CO2 as the ethanol plan. Thus, ethanol with carbon capture appears to be an opportunity cost that may damage climate and air quality, occupy land, and saddle consumers with high fuel costs for decades.
Ethanol use in vehicle fuel is increasing worldwide, but the potential cancer risk and ozone-related health consequences of a large-scale conversion from gasoline to ethanol have not been examined. ...Here, a nested global-through-urban air pollution/weather forecast model is combined with high-resolution future emission inventories, population data, and health effects data to examine the effect of converting from gasoline to E85 on cancer, mortality, and hospitalization in the United States as a whole and Los Angeles in particular. Under the base-case emission scenario derived, which accounted for projected improvements in gasoline and E85 vehicle emission controls, it was found that E85 (85% ethanol fuel, 15% gasoline) may increase ozone-related mortality, hospitalization, and asthma by about 9% in Los Angeles and 4% in the United States as a whole relative to 100% gasoline. Ozone increases in Los Angeles and the northeast were partially offset by decreases in the southeast. E85 also increased peroxyacetyl nitrate (PAN) in the U.S. but was estimated to cause little change in cancer risk. Due to its ozone effects, future E85 may be a greater overall public health risk than gasoline. However, because of the uncertainty in future emission regulations, it can be concluded with confidence only that E85 is unlikely to improve air quality over future gasoline vehicles. Unburned ethanol emissions from E85 may result in a global-scale source of acetaldehyde larger than that of direct emissions.