The unprecedented emergence of perovskite‐based solar cells (PSCs) has been accompanied by an intensive search of suitable materials for charge‐selective contacts. For the first time a ...hole‐transporting self‐assembled monolayer (SAM) as the dopant‐free hole‐selective contact in p–i–n PSCs is used and a power conversion efficiency of up to 17.8% with average fill factor close to 80% and undetectable parasitic absorption is demonstrated. SAM formation is achieved by simply immersing the substrate into a solution of a novel molecule V1036 that binds to the indium tin oxide surface due to its phosphonic anchoring group. The SAM and its modifications are further characterized by Fourier‐transform infrared and vibrational sum‐frequency generation spectroscopy. In addition, photoelectron spectroscopy in air is used for measuring the ionization potential of the studied SAMs. This novel approach is also suitable for achieving a conformal coverage of large‐area and/or textured substrates with minimal material consumption and can potentially be extended to serve as a model system for substrate‐based perovskite nucleation and passivation control. Further gains in efficiency can be expected upon SAM optimization by means of molecular and compositional engineering.
A novel concept for the formation of the hole selective layer in efficient perovskite solar cells is presented. Carbazole‐based material is synthesized and used for the formation of a self‐assembled monolayer on top of the indium tin oxide transparent conductive substrate. Power conversion efficiency as high as 17.8% is achieved.
The wettability issue associated with the Me-4PACz hole-selective monolayer is solved by the introduction of the second component to the precursor solution. This results in a similar performance ...while simultaneously significantly improving the yield of the devices.
The vast majority of the hole transporting materials require the use of chemical doping as an essential step for preparation of efficient perovskite solar cells. An oxidized organic hole‐transporting ...material, obtained during a doping procedure, could potentially be one of the weak links in the device composition. It is not uncommon for the solar cell to heat up under summer sun; therefore, all device components must possess some degree of resistance to repetitive thermal stress. In the current publication, a series of oxidized hole‐transporting materials have been synthesized and their long‐term stability investigated. During thermal stability testing of the films, kept at 100 °C under an inert atmosphere, it was observed that oxidized HTMs start to degrade and partly revert to original unoxidized material. It is known that oxidized HTM, formed during doping, is responsible for the increased conductivity and ultimately for better efficiency of hole extraction process in the PSC device; therefore, observed instability of the oxidized HTMs in the thin films at elevated temperatures could be one of the causes of drop in conductivity reported for the doped spiro‐OMeTAD. It could also potentially be one of the reasons why perovskite solar cells lose their efficiency under prolonged thermal stress.
An oxidized hole transporting material, formed during doping, is responsible for increased conductivity and better efficiency of hole extraction process in perovskite solar cells. During long‐term thermal stability testing, degradation and reversion back to original unoxidized material was observed. Reported instability could be one of the causes of drop in hole transporting material's conductivity and ultimately in device's performance.
A series of new branched hole transporting materials (HTMs) containing two diphenylamine‐substituted carbazole fragments linked by a nonconjugated methylenebenzene unit is synthesized and tested in ...perovskite solar cells. Synthesis of the investigated materials is performed by a simple two‐step synthetic procedure providing a target product in high yield. The isolated materials demonstrate good thermal stability and majority of the investigated compounds exist in an amorphous state, which is advantageous as there is no risk of crystallization directly in the film. The highest charge drift mobility of µ0 = 4 × 10−4 cm2 V−1 s−1, measured at weak electric fields, is by ca. one order of magnitude higher than that of Spiro‐OMeTAD under identical conditions. From the perovskite solar cell testing results, it can be seen that performance of two new HTMs (V885 and V911) is on a par with Spiro‐OMeTAD. Due to the ease of synthesis, good thermal, optical and photophysical properties, this type of molecules hold great promise for practical application in commercial perovskite solar cells.
Branched hole transporting materials (HTMs), containing two diphenylamine substituted carbazole moieties linked by a nonconjugated fragment, are synthesized and tested in perovskite solar cells. They are synthesized by a simple two‐step synthetic procedure providing target products in high yield. Testing in perovskite solar cells indicates that performance of new HTMs is on a par with Spiro‐OMeTAD.
New semiconductors containing fluorene or fluorenone central fragments along with phosphonic acid anchoring groups were synthesized and investigated as electron transporting materials for possible ...application in photovoltaic devices. These derivatives demonstrate good thermal stability and suitable electrochemical properties for effective electron transport from perovskite, Sb
2
S
3
and Sb
2
Se
3
absorber layers. Self-assembled fluorene and fluorenone electron-transporting materials have shown improved substrate wettability, indicating bond formation between monolayer-forming compounds and the ITO, TiO
2
, Sb
2
S
3
, or Sb
2
Se
3
surface. Additionally, investigated materials have compatible energetic band alignment and can passivate perovskite interface defects, which makes them interesting candidates for application in the n-i-p structure perovskite solar cell.
New semiconductors containing fluorene or fluorenone central fragments along with phosphonic acid anchoring groups were synthesized and investigated as electron transporting materials for possible application in photovoltaic devices.
In article number 1801892, Steve Albrecht, Vytautas Getautis and co‐workers demonstrate a novel promising concept for the formation of a hole selective monolayer in perovskite solar cells. A low ...temperature dopant‐free technique makes it suitable for different substrates.
We demonstrate a monolithic perovskite/CIGS tandem solar cell with a certified power conversion efficiency (PCE) of 24.2%. The tandem solar cell still exhibits photocurrent mismatch between the ...subcells; thus optical simulations are used to determine the optimal device stack. Results reveal a high optical potential with the optimized device reaching a short-circuit current density of 19.9 mA cm–2 and 32% PCE based on semiempirical material properties. To evaluate its energy yield, we first determine the CIGS temperature coefficient, which is at −0.38% K–1 notably higher than the one from the perovskite subcell (−0.22% K–1), favoring perovskite in the field operation at elevated cell temperatures. Both single-junction cells, however, are significantly outperformed by the combined tandem device. The enhancement in energy output is more than 50% in the case of CIGS single-junction device. The results demonstrate the high potential of perovskite/CIGS tandem solar cells, for which we describe optical guidelines toward 30% PCE.
Display omitted
•Triphenylamine-based phenylhydrazone-indolium cationic dyes D1 and D2 were designed and synthesized.•Dyes demonstrate strong absorption between 500 and 800 nm and high molar ...extinction coefficient values (ε > 104).•Dyes have proper electronic energy levels as promising sensitizers.
D-π-A architecture metal-free organic dyes, with a triphenylamine phenylhydrazone unit as electron donor and 5-carboxy-1-butyl-2,3,3-trimethyl-3H-indolium iodide as an electron withdrawing group, were designed and synthesized for solid-state dye-sensitized solar cells. These dyes demonstrate strong absorption between 500 and 800 nm, high molar extinction coefficient values (ε > 104) and have proper electronic energy levels as promising sensitizers.
PDF
