Hybrid phenol-formaldehyde (PF) resins represent one of the most important niche groups of binding systems for composites. New industrial needs, environmental requirements, and price fluctuations ...have led to further research on materials with enhanced mechanical and thermal properties. The preparation of novel hybrid materials can be achieved by inclusion of various elements or functional groups in the organic polymer phenolic framework. Herein, we report the synthesis and characterization of a PF-based hybrid material with different nanoscale silicone species and ZnAl-layered double hydroxide (LDH). The main goals of this study were to improve the synthetic pathways of hybrid resin, as well as to prepare granulated composite materials and test samples and determine their characterization. Added inorganic species increased the glass-transition temperature by a minimum of 8 °C, which was determined using differential scanning calorimetry (DSC). Rheological properties (melting viscosity and flow distance) of the hybrid resin were measured. The homogeneity of distribution of added species across the organic matrix was evaluated with scanning electron microscopy (SEM). With synthesized new hybrid-binding systems, we prepared different granulated composite materials and evaluated them with the measurements of rheological properties (flow curing characteristics). Tensile strength of samples, prepared from granulated composite material, improved by more than 5%.
Display omitted
•3Cu-Al@500 petal-like nanosheets catalyst showed a glycerol conversion 96% and GC yield 86%.•The catalyst with higher basicity showed better glycerol conversion and GC ...yield.•Comprehensive investigation of the optimization of reaction conditions and catalyst reusability performance.•Proposed a reaction mechanism for GC synthesis from the transcarbonation reaction.•Minimization of external and internal mass transfer resistance of catalyst.
A series of robust and efficient Cu-Al hydrotalcite-like compounds (HTLc) as catalysts were prepared by the simple precipitation method with different Cu/Al molar ratios and investigated for the transcarbonation of glycerol with dimethyl carbonate (DMC) for glycerol carbonate (GC) synthesis in a batch reactor. The structural and textural properties of the Cu-Al (HTLc) catalysts were analyzed by several methods like N2-sorption, SEM-EDX/TEM, XRD, FTIR, CO2-TPD, TGA/DTA and ICP-OES. It was found that the transcarbonation of glycerol is directly dependent on the strong basic sites of the catalysts. The Cu/Al molar ratio has easily tuned the glycerol conversion and the GC yield. Among all synthesized catalysts, the Copper-Aluminum (3Cu-Al@500) catalyst showed excellent catalytic activity for a glycerol conversion (96%) and a GC yield (86%) with reaction rate (irrespective to glycerol) of approximately 0.106 mol L−1 h−1. Furthermore, the optimization of the reaction conditions (i.e. molar ratio of the reactants, catalyst mass, reaction time and temperature) and the reusability of the 3Cu-Al@500 catalyst for glycerol conversion and GC yield with TOF value were studied. In addition, the effect of stirring speed and particle size on the minimization of external and internal mass transfer resistance, respectively, was investigated.
CeO2-TiO2 is an important mixed oxide due to its catalytic properties, particularly in heterogeneous photocatalysis. This study presents a straightforward method to obtain 1D TiO2 nanostructures ...decorated with CeO2 nanoparticles at the surface. As the precursor, we used H2Ti3O7 nanoribbons prepared from sodium titanate nanoribbons by ion exchange. Two cerium sources with an oxidation state of +3 and +4 were used to obtain mixed oxides. HAADF–STEM mapping of the Ce4+-modified nanoribbons revealed a thin continuous layer at the surface of the H2Ti3O7 nanoribbons, while Ce3+ cerium ions intercalated partially between the titanate layers. The phase composition and morphology changes were monitored during calcination between 620 °C and 960 °C. Thermal treatment led to the formation of CeO2 nanoparticles on the surface of the TiO2 nanoribbons, whose size increased with the calcination temperature. The use of Ce4+ raised the temperature required for converting H2Ti3O7 to TiO2-B by approximately 200 °C, and the temperature for the formation of anatase. For the Ce3+ batch, the presence of cerium inhibited the conversion to rutile. Analysis of cerium oxidation states revealed the existence of both +4 and +3 in all calcined samples, regardless of the initial cerium oxidation state.
Poly(vinyl alcohol) (PVA) biocomposite films reinforced with cellulose nanofibrils (CNF) and biologically active tannic acid (TA) were prepared. The influence of different concentrations of CNF and ...TA in the PVA polymer matrix was investigated in terms of mechanical properties, thermal properties and hydrophobicity improvement of the prepared films. The results showed that in all cases the addition of CNF and TA improved the values of tensile strength and elastic modulus. The PVA film with 10 % CNF exhibited a 30 % higher tensile strength, and the three-component PVA film with 2 % CNF and 10 % TA (P2C10T) exhibited a 40 % higher tensile strength compared to the neat PVA film. The thermal properties (Tg, Tonset) of the PVA biocomposite films were greatly improved, with a significant effect observed for the three-component PVA films. The Tg of the PVA film with 10 % CNF and 10 % TA was 87 °C, 12 °C higher than that of the neat PVA film. For three-component PVA biocomposites with 4 % and 6 % CNF and with all weight percentages of TA, the Tonset shifted to a higher temperature range by about 30 °C compared to the neat PVA film. The PVA film with 2 % CNF and 10 % TA exhibited about a 20° higher contact angle than the neat PVA film. Moreover, the addition of both fillers to the PVA matrix resulted in PVA biocomposites with lower water absorption. PVA film with 10 % TA absorbed about 90 % less water and PVA film with 10 % CNF and 10 % TA absorbed about 80 % less water than the neat PVA film after the films were soaked in water for one hour. The better properties of the composite films produced are due to hydrogen and ester bonds between the components of the composite, which was confirmed by FT-IR spectroscopy. Antioxidant effective films were also obtained due to the biologically active TA to the PVA and PVA/CNF systems.
Display omitted
Active monomers: Grafting soluble organic molecules onto insoluble, high‐surface‐area substrates, e.g. calixquinones on nanoparticles (see pciture), allows the production of a wide range of very ...stable materials for lithium‐ion battery applications. Immobilization of the organic molecules avoids the problem of dissolution, which has previously led to performance degradation.
Titanium dioxide photocatalysts have received a lot of attention during the past decades due to their ability to degrade various organic pollutants to CO
and H
O, which makes them suitable for use in ...environmental related fields such as air and water treatment and self-cleaning surfaces. In this work, titania thin films and powders were prepared by a particulate sol-gel route, using titanium tetrachloride (TiCl
) as a precursor. Afterwards, the prepared sols were doped with nitrogen (ammonium nitrate, urea), sulfur (thiourea) and platinum (chloroplatinic acid), coated onto glass substrates by dip-coating, and thermally treated in a muffle furnace to promote crystallization. The resulting thin films were then characterized by various techniques (i.e., TGA-DSC-MS, XRD, BET, XPS, SEM, band gap measurements). The photocatalytic activity of the prepared thin films was determined by measuring the degradation rate of plasmocorinth B (PB), an organic pigment used in the textile industry, which can pose an environmental risk when expelled into wastewater. A kinetic model for adsorption and subsequent degradation was used to fit the experimental data. The results have shown an increase in photocatalytic activity under visible-light illumination of nonmetal and metal doped and co-doped titania thin films compared to an undoped sample.
In recent research, significant interest has been directed towards gelatin-based hydrogels due to their affordable price, extensive availability, and biocompatibility, making them promising ...candidates for various biomedical applications. The development and characterization of novel hydrogels formed from varying ratios of gelatin, triblock copolymer Pluronic F-127, and phytic acid have been presented. Swelling properties were examined at different pH levels. The morphology of hydrogels and their thermal properties were analyzed using scanning electron microscopy (SEM), thermogravimetric analysis (TG), and differential scanning calorimetry (DSC). Fourier-transform infrared (FTIR) analysis of the hydrogels was also performed. The introduction of phytic acid in the hydrogel plays a crucial role in enhancing the intermolecular interactions within gelatin-based hydrogels, contributing to a more stable, elastic, and robust network structure.
Display omitted
•Protonated titanate nanotubes (HTiNTs) successfully catalyzed aldol condensation.•This is due to the possession of strong acid sites (surface bridging OH groups).•Polar solvents ...compete with substrates for active sites on the surface of HTiNTs.•HTiNTs did not require any activation prior to the reaction.•HTiNTs were reused several times and efficient even in a 1g experiment.
One-dimensional protonated titanate nanostructures were tested as solid acid catalysts in the condensation reaction between benzaldehyde and cyclohexanone. Two morphologies were employed – nanotubes and nanoribbons. In situ diffuse reflectance infrared Fourier transform spectroscopy of adsorbed NH3 and NH3 temperature programmed desorption revealed that both protonated titanate nanotubes and nanoribbons possess Lewis and Brønsted acid sites with medium acid strength, whereas only nanotubes have also strong acid sites. Therefore only protonated titanate nanotubes revealed an efficient catalyst that was also successfully applied to other reaction systems with substituted benzaldehyde derivatives. Recycling studies showed no significant decrease in the catalytic activity of protonated titanate nanotubes in five cycles and even showed an excellent performance in the large scale experiment. In addition, protonated titanate nanotubes did not require any activation prior to the reaction. The mechanism is proposed to describe the condensation process over the catalyst.
PDF
