Display omitted
Recently trans-resveratrol (trans-RSV) has received great attention due to its prophylactic and therapeutic properties. Its limited bioavailability provides compelling evidence of the ...need for more suitable formulations in order to attain better clinical effectiveness. Some physicochemical properties of trans-RSV are still unknown or research findings are contradictory. Therefore, this paper presents newly determined trans-RSV solubility and stability at various pH and temperatures, and the importance of such data for the studies of novel trans-RSV-loaded nanofibers. In acidic pH trans-RSV was stable, whereas its degradation started to increase exponentially above pH 6.8. Consequently, it is worthwhile to note that special consideration has to be dedicated to long dissolution testing or biological assays on cell lines in order to obtain relevant data. Measurements were done by validated UV/VIS spectroscopy, HPLC, and newly developed UPLC methods. Specificity was confirmed for HPLC and UPLC method, whereas UV/VIS spectroscopy resulted in false higher trans-RSV concentrations in conditions under which it was not stable (alkaline pH, light, increased temperature). The study is of interest because it draws attention to the importance of careful selected experimental conditions, their influence on the trans-RSV stability and the implications this has for formulation development, storage, and maintenance of therapeutic doses.
Electrospinning is an efficient and flexible method for nanofiber production, but it is influenced by many systemic, process, and environmental parameters that govern the electrospun product ...morphology. This study systematically investigates the influence of relative humidity (RH) on the electrospinning process. The results showed that the morphology of the electrospun product (shape and diameter) can be manipulated with precise regulation of RH during electrospinning. Because the diameter of nanofibers correlates with their rigidity, it was shown that RH control can lead to manipulation of material mechanical properties. Finally, based on the solution's rheological parameter—namely, phase shift angle—we were able to predict the loss of homogenous nanofiber structure in correlation with RH conditions during electrospinning. This research addresses the mechanism of RH impact on the electrospinning process and offers the background to exploit it in order to better control nanomaterial properties and alter its applicability.
Hydrophilic matrix tablets with controlled drug release have been used extensively as one of the most successful oral drug delivery systems for optimizing therapeutic efficacy. In this work, magnetic ...resonance imaging (MRI) is used to study the influence of various pHs and mechanical stresses caused by medium flow (at rest, 80, or 150 mL/min) on swelling and on pentoxifylline release from xanthan (Xan) tablets. Moreover, a bimodal MRI system with simultaneous release testing enables measurements of hydrogel thickness and drug release, both under the same experimental conditions and at the same time. The results show that in water, the hydrogel structure is weaker and less resistant to erosion than the Xan structure in the acid medium. Different hydrogel structures affect drug release with erosion controlled release in water and diffusion controlled release in the acid medium. Mechanical stress simulating gastrointestinal contraction has no effect on the hard hydrogel in the acid medium where the release is independent of the tested stress, while it affects the release from the weak hydrogel in water with faster release under high stress. Our findings suggest that simultaneous MR imaging and drug release from matrix tablets together provide a valuable prognostic tool for prolonged drug delivery design.
Oxidative stress is associated with a wide range of diseases characterised by oxidant-mediated disturbances of various signalling pathways and cellular damage. The only effective strategy for the ...prevention of cellular damage is to limit the production of oxidants and support their efficient removal. The implication of the nuclear factor erythroid 2-related factor 2 (Nrf2) pathway in the cellular redox status has spurred new interest in the use of its natural modulators (e.g., curcumin, resveratrol). Unfortunately, most natural Nrf2 modulators are poorly soluble and show extensive pre-systemic metabolism, low oral bioavailability, and rapid elimination, which necessitates formulation strategies to circumvent these limitations. This paper provides a brief introduction on the cellular and molecular mechanisms involved in Nrf2 modulation and an overview of commonly studied formulations for the improvement of oral bioavailability and in vivo pharmacokinetics of Nrf2 modulators. Some formulations that have also been studied in vivo are discussed, including solid dispersions, self-microemulsifying drug delivery systems, and nanotechnology approaches, such as polymeric and solid lipid nanoparticles, nanocrystals, and micelles. Lastly, brief considerations of nano drug delivery systems for the delivery of Nrf2 modulators to the brain, are provided. The literature reviewed shows that the formulations discussed can provide various improvements to the bioavailability and pharmacokinetics of natural Nrf2 modulators. This has been demonstrated in animal models and clinical studies, thereby increasing the potential for the translation of natural Nrf2 modulators into clinical practice.
Periodontal disease is chronic inflammation of periodontal tissues resulting in formation of periodontal pockets, periodontal attachment loss and progressive destruction of the ligament and alveolar ...bone. This review gives an update on periodontal disease pathogenesis, which is important for the development of novel methods and delivery systems for its treatment. The available treatment approaches, including removal of dental plaque, modulation of the host inflammatory response, and regeneration of periodontal tissue, are reviewed and their drawbacks discussed. Furthermore the latest achievements involving development of nanomedicines, which represent a new approach to better treatment of periodontal disease, are highlighted. They enable local drug delivery to particular tissues, cells, or subcellular compartments in periodontal pockets, either to biofilm pathogens or host cells, as well as control the release of incorporated drugs, usually antibiotic or anti-inflammatory. Specific examples of the nanocarriers or nanomaterials such as liposomes, lipid and polymeric nanoparticles, nanocrystals, dendrimers, and nanofibers under development for the treatment of periodontal disease are also clearly reviewed. Nanofibers are of special interest as nanodelivery systems and scaffolds for the regeneration of periodontal tissue. Finally, the future outlook of novel therapeutic approaches involving nanodelivery systems in the treatment of periodontal disease is provided.
Lactic acid bacteria can have beneficial health effects and be used for the treatment of various diseases. However, there remains the challenge of encapsulating probiotics into delivery systems with ...a high viability and encapsulation efficacy. The electrospinning of bacteria is a novel and little-studied method, and further investigation of its promising potential is needed. Here, the morphology, zeta potential, hydrophobicity, average cell mass, and growth characteristics of nine different species of Lactobacillus and one of Lactococcus are characterized. The electrospinning of polymer solutions containing ~10 log colony forming units (CFU)/mL lactic acid bacteria enabled the successful incorporation of all bacterial species tested, from the smallest (0.74 µm; Lactococcus lactis) to the largest (10.82 µm; Lactobacillus delbrueckii ssp. bulgaricus), into poly(ethylene oxide) nanofibers with an average diameter of ~100 nm. All of these lactobacilli were viable after incorporation into nanofibers, with 0 to 3 log CFU/mg loss in viability, depending on the species. Viability correlated with the hydrophobicity and extreme length of lactic acid bacteria, whereas a horizonal or vertical electrospinning set-up did not have any role. Therefore, electrospinning represents a promising method for the incorporation of lactic acid bacteria into solid delivery systems, while drying the bacterial dispersion at the same time.
Nanofibers represent an attractive novel drug delivery system for prolonged and controlled release. However, sustained release of hydrophilic drugs, like ciprofloxacin hydrochloride (CIP), from ...polymeric nanofibers is not an easy task. The present study investigates the effect of different hydrophobic polymers (PCL and PMMA) alone in monolithic nanofibers or with hydrophilic polymers (PVA, PEO, and chitosan) in blended nanofibers aiming to achieve sustained CIP release. CIP release from PCL nanofibers was 46% and from PMMA just 1.5% over 40 day period. Thus, PMMA holds great promise for modification of CIP release from blended nanofibers. PMMA blends with 10% PEO, PVA, or chitosan were used to electrospin nanofibers from solution in the mixture of acetic and formic acid. These nanofibers exhibited different drug-release profiles: PEO containing nanofiber mats demonstrated high burst effect, chitosan containing mats revealed very slow gradual release, and PVA containing mats yielded smaller burst effect with favorable sustained release. We have also shown that gradual sustain release of antibiotic like CIP can be additionally tuned over 18 days with various blend ratios of PMMA with PVA or chitosan reaching almost 100%. A mathematical model in agreement with the experimental observation revealed that the sustained CIP release from the blended nanofibers corresponded to the two-stage desorption process.
Display omitted
Periodontal disease is a widespread chronic condition associated with degradation of periodontal tissues that requires more effective approaches for its treatment. Thus, the aim was ...to develop a nanodelivery system for local application of antimicrobials, with evaluation in vitro using a newly developed micro flow-through apparatus that simulates local in-vivo conditions in the periodontal pocket: small resting volume, and low gingival crevicular fluid flow rate. We successfully developed a double-layer nanofiber mat composed of a chitosan/ poly(ethylene) oxide nanofiber layer with 30% ciprofloxacin, and a poly(ε-caprolactone) nanofiber layer with 5% metronidazole. The precisely designed composition enabled sustained in-vitro release of the antimicrobials according to their specific drug release mechanisms. The rate-limiting step of ciprofloxacin release was its own low solubility at pH 7.4, when there was excess of solid drug present in the delivery system. In contrast, sustained release of metronidazole was due to slow penetration of dissolution medium through the hydrophobic poly(ε-caprolactone) nanofiber layer. The double-layer nanofiber mat developed showed antibacterial activity against Escherichia coli and Aggregatibacter actinomycetemcomitans based on plate antibiogram assays. The antimicrobial concentrations released from the nanofiber mats determined using the developed apparatus were above the minimal inhibitory concentrations against the periodontal pathogens for up to 7 days, which is valuable information for prediction of the efficacy of the nanodelivery system. Although this apparatus was specifically designed for characterization of formulations associated with treatments for periodontal disease, its applicability is much wide, as for development of any delivery system for application at target sites that have similar local conditions.
Oral delivery of protein drugs is greatly limited by low hydrophobicity, an important determinant for intestinal epithelial permeation and bioavailability. Herein, surface properties of recombinant ...erythropoietin were investigated using the fluorescent dye bis-ANS to monitor relative hydrophobicity for correlation with permeabilities with Caco-2 cells. At various pHs, bis-ANS fluorescence intensity indicated different surface hydrophobicities of erythropoietin molecules. Erythropoietin incorporated in chitosan or chitosan-trimethylchitosan (CS-TMC) nanoparticles prepared by polyelectrolyte complexation and ionotropic gelation with tripolyphosphate also showed different surface hydrophobicities. Chitosan nanoparticles with erythropoietin provided the most hydrophobic surface, followed by free erythropoietin (in water) and that loaded into CS-TMC nanoparticles. Chitosan nanoparticles were more effective than CS-TMC nanoparticles for permeation of erythropoietin across Caco-2 cell monolayers; the lowest permeability was shown by erythropoietin itself. Thus, hydrophilic protein molecules complexed with polyelectrolytes can provide more hydrophobic surfaces that enhance transepithelial permeability. This bis-ANS method also provides valuable information for the design of polyelectrolyte nanoparticules for oral delivery of protein drugs.
Lactobacilli are a promising natural tool against vaginal dysbiosis and infections. However, new local delivery systems and additional knowledge about their distribution and mechanism of action would ...contribute to the development of effective medicine. This will be facilitated by the introduction of the techniques for effective, inexpensive, and real-time tracking of these probiotics following their release. Here, we engineered three model vaginal lactobacilli (
ATCC 33820,
ATCC 33323, and
ATCC 25258) and a control
ATCC 8014 to express fluorescent proteins with different spectral properties, including infrared fluorescent protein (IRFP), green fluorescent protein (GFP), red fluorescent protein (mCherry), and blue fluorescent protein (mTagBFP2). The expression of these fluorescent proteins differed between the
species and enabled quantification and discrimination between lactobacilli, with the longer wavelength fluorescent proteins showing superior resolving power. Each
strain was labeled with an individual fluorescent protein and incorporated into poly (ethylene oxide) nanofibers using electrospinning, as confirmed by fluorescence and scanning electron microscopy. The lactobacilli retained their fluorescence in nanofibers, as well as after nanofiber dissolution. To summarize, vaginal lactobacilli were incorporated into electrospun nanofibers to provide a potential solid vaginal delivery system, and the fluorescent proteins were introduced to distinguish between them and allow their tracking in the future probiotic-delivery studies.
PDF
