The problem of active fault-tolerant control (FTC) is investigated for the large-scale nonlinear systems in nonstrict-feedback form. The nonstrict-feedback nonlinear systems considered in this paper ...consist of unstructured uncertainties, unmeasured states, unknown interconnected terms, and actuator faults (e.g., bias fault and gain fault). A state observer is designed to solve the unmeasurable state problem. Neural networks (NNs) are used to identify the unknown lumped nonlinear functions so that the problems of unstructured uncertainties and unknown interconnected terms can be solved. By combining the adaptive backstepping design principle with the combination Nussbaum gain function property, a novel NN adaptive output-feedback FTC approach is developed. The proposed FTC controller can guarantee that all signals in all subsystems are bounded, and the tracking errors for each subsystem converge to a small neighborhood of zero. Finally, numerical results of practical examples are presented to further demonstrate the effectiveness of the proposed control strategy.
The adaptive fuzzy tracking control design problem for multi-input and multi-output uncertain switched nonstrict-feedback nonlinear systems with arbitrary switchings is investigated in this paper. ...Fuzzy logic systems are introduced to identify the unknown nonlinear functions (for state measurable case) and model the uncertain nonlinear systems (for state immeasurable case). Both state feedback and observer-based output feedback control design schemes are developed based on combined command filter and adaptive fuzzy control technique. The proposed adaptive fuzzy controllers not only solve the "explosion of complexity" problem existing in conventional backstepping control schemes, but as well as avoid the calculation of partial derivatives. Furthermore, the stability of the fuzzy control systems under arbitrary switchings is proven based on the common Lyapunov function method. Two simulation examples are presented to further demonstrate the effectiveness of the proposed control strategies.
This paper proposes an fuzzy adaptive output-feedback stabilization control method for nonstrict feedback uncertain switched nonlinear systems. The controlled system contains unmeasured states and ...unknown nonlinearities. First, a switched state observer is constructed in order to estimate the unmeasured states. Second, a variable separation approach is introduced to solve the problem of nonstrict feedback. Third, fuzzy logic systems are utilized to identify the unknown uncertainties, and an adaptive fuzzy output feedback stabilization controller is set up by exploiting the backstepping design principle. At last, by applying the average dwell time method and Lyapunov stability theory, it is proven that all the signals in the closed-loop switched system are bounded, and the system output converges to a small neighborhood of the origin. Two examples are given to further show the effectiveness of the proposed switched control approach.
This paper is concerned with the problem of adaptive fuzzy tracking control for a class of multi-input and multi-output (MIMO) strict-feedback nonlinear systems with both unknown nonsymmetric ...dead-zone inputs and immeasurable states. In this research, fuzzy logic systems are utilized to evaluate the unknown nonlinear functions, and a fuzzy adaptive state observer is established to estimate the unmeasured states. Based on the information of the bounds of the dead-zone slopes as well as treating the time-varying inputs coefficients as a system uncertainty, a new adaptive fuzzy output feedback control approach is developed via the backstepping recursive design technique. It is shown that the proposed control approach can assure that all the signals of the resulting closed-loop system are semiglobally uniformly ultimately bounded. It is also shown that the observer and tracking errors converge to a small neighborhood of the origin by selecting appropriate design parameters. Simulation examples are also provided to illustrate the effectiveness of the proposed approach.
In this paper, a hybrid fuzzy adaptive output feedback control design approach is proposed for a class of multiinput and multioutput strict-feedback nonlinear systems with unknown time-varying ...delays, unmeasured states, and input saturation. First, fuzzy logic systems are employed to approximate unknown nonlinear functions in the system. Next, a smooth function is used to approximate the input saturation and an adaptive fuzzy state observer is constructed to solve the problem of unmeasured states. Based on the designed adaptive fuzzy state observer, a serial-parallel estimation model is established. By applying adaptive fuzzy dynamic surface control technique and utilizing the prediction error between the system states observer model and the serial-parallel estimation model, a new fuzzy controller with the composite parameters adaptive laws is developed based on Lyapunov-Krasovskii functional. It is proved that all variables of the closed-loop system are bounded and the system outputs can follow the given bounded reference signals as close as possible. A simulation example is provided to further show the effectiveness of this novel control scheme.
In this paper, an adaptive fuzzy backstepping output-feedback tracking control approach is proposed for a class of multi-input and multi-output (MIMO) stochastic nonlinear systems. The MIMO ...stochastic nonlinear systems under study are assumed to possess unstructured uncertainties, unknown dead-zones, and unknown control directions. By using a linear state transformation, the unknown control coefficients and the unknown slopes characteristic of the dead-zones are lumped together, and the original system is transformed to a new system on which the control design becomes feasible. Fuzzy logic systems are used to approximate the unstructured uncertainties, and a fuzzy state observer is designed to estimate the unmeasured states. By introducing a special Nussbaum gain function into the backstepping control design, a stable adaptive fuzzy output-feedback tracking control scheme is developed. The main features of the proposed adaptive control approach are that it can guarantee the stability of the closed-loop system, and the tracking errors converge to a small neighborhood of zero. Moreover, it can solve the problems of unknown control direction, unknown dead-zone, and unmeasured states simultaneously. Two simulation examples are provided to show the effectiveness of the proposed approach.
This paper investigates an adaptive fuzzy tracking control design problem for single-input and single-output uncertain nonstrict feedback nonlinear systems. For the cases of the states measurable and ...the states immeasurable, fuzzy logic systems are separately adopted to approximate the unknown nonlinear functions or model the uncertain nonlinear systems. In the unified framework of adaptive backstepping control design, both adaptive fuzzy state feedback and observer-based output feedback control design schemes are proposed. The stability of the closed-loop systems is proved by using Lyapunov function theory. The simulation examples are provided to confirm the effectiveness of the proposed control methods.
In this paper, an adaptive fuzzy backstepping control approach is considered for a class of nonlinear strict-feedback systems with unknown functions, unknown dead zones, and immeasurable states. ...Fuzzy logic systems are utilized to approximate the unknown nonlinear functions, and a fuzzy filters state observer is designed to estimate the immeasurable states. By using the adaptive backstepping recursive design technique and constructing the dead-zone inverse, a new adaptive fuzzy backstepping output-feedback control approach is developed. It is mathematically proved that all the signals of the resulting closed-loop adaptive control system are semiglobally uniformly ultimately bounded, and the tracking error converges to a small neighborhood of the origin by appropriate choice of design parameters. The proposed approach cannot only solve the problem of the dead zones but also cancel the restrictive assumption in the previous literature that the states are all available for measurement. Two simulation examples are provided to show the effectiveness of the proposed approach.
In this paper, a partial tracking error constrained fuzzy output-feedback dynamic surface control (DSC) scheme is proposed for a class of uncertain multi-input and multi-output (MIMO) nonlinear ...systems. The considered MIMO nonlinear systems contain unknown functions and without the requirement of their states being available for the controller design. With the help of fuzzy logic systems identifying the MIMO unknown nonlinear systems, a fuzzy adaptive observer is established to estimate the unmeasured states. By transforming the tracking errors into new virtual error variables and based on the DSC backstepping recursive design technique, a new adaptive fuzzy output-feedback control method is developed. It is proved that the proposed control approach can guarantee that all the signals of the resulting closed-loop system are bounded and the partial state tracking errors are confined all times within the prescribed bounds. The simulation results and comparisons with the previous control approaches confirm the effectiveness and utility of the proposed scheme.
•Green surfactants (DBBD and QBBD) exhibit excellent inhibition efficiency.•Two inhibitors show significant properties of wettability and adsorption.•Scanning kelvin probe (SKP) proved the inhibitors ...have an obvious inhibiting effect.•Theoretical calculations further showing a definite correlation between the theoretical and experimental results.
Novel surfactants were synthesized and investigated as green corrosion inhibitor for mild steel in 15% HCl solution in various ways including weight loss, electrochemical measurements, scanning kelvin probe (SKP), scanning electron microscope (SEM) and theoretical calculations. The efficiency of the inhibitors against the corrosion of mild steel in the aggressive solution (15% HCl) were evaluated gravimetrically at various temperatures. The corrosion inhibition efficiency (η) has been increased with the increase of the inhibitor concentration, the maximum η achieved was equal to 98.97 at temperature 90 °C. The experiments results reveal that two surfactants were effective corrosion inhibitor, and because of the amphiphilic nature of surfactant molecules, the inhibitors can be adsorbed onto mild steel surface, obeying the Langmuir adsorption isotherm. Finally, Theoretical calculation parameters of quantum chemical calculation and molecular dynamic simulations further showing a definite correlation between the theoretical and experimental results.