Warehouse operations need to change due to the increasing complexity and variety of customer orders. The demand for real-time data and contextual information is requried because of the highly ...customised orders, which tend to be of small batch size but with high variety. Since the orders frequently change according to customer requirements, the synchronisation of purchase orders to support production to ensure on-time order fulfilment is of high importance. However, the inefficient and inaccurate order picking process has adverse effects on the order fulfilment. The objective of this paper is to propose an Internet of things (IoT)-based warehouse management system with an advanced data analytical approach using computational intelligence techniques to enable smart logistics for Industry 4.0. Based on the data collected from a case company, the proposed IoT-based WMS shows that the warehouse productivity, picking accuracy and efficiency can be improved and it is robust to order variability.
Knowledge of the generation of subsurface flow for hillslopes is important for controlling agricultural nonpoint nutrient losses. This study used a physically based hillslope hydrologic model ...HYDRUS‐2D to assess the sensitivity of simulated subsurface flow to the interactions between precipitation, soil texture and land use. Soil moisture data from 1 January 2013 to 23 August 2014 at two monitoring sites on a tea plantation hillslope were used to calibrate the van Genuchten–Mualem hydraulic parameters for this model. For six different textural classes (loamy sand, loam, silt, silt loam, clay loam and clay) and four land‐use types (tea garden, forest, grassland and bare soil), scenario‐based simulations were carried out for varied precipitation intensities (6.0, 15.0, 30.0, 45.0, 60.0 and 76.0 mm/day) and frequencies (time intervals of 1, 5, 10, 15, 20 and 25 days). Results indicated that the hillslope run‐off was dominated by subsurface flow, which was influenced by precipitation and antecedent moisture conditions. A threshold value of 0.18 m3/m3 of mean hillslope soil moisture was observed for the initiation of subsurface flow. High precipitation intensity (i.e. 75.0 mm/day) substantially increased subsurface flow for all soil textures. In addition, the sensitivity of the bare soil hillslope to rainfall patterns was more than two times higher than that of the vegetated (i.e. grassland, tea garden and forest) hillslope. These findings suggest that extreme precipitation events and land‐use change will increase the risks of subsurface flow on hillslopes. Therefore, optimal fertilizer application strategy and land‐use planning should be proposed for controlling the hillslope nonpoint nutrient losses.
sp. have broadly gained attention as a prospective resource for the production of omega-3 fatty acids production in significant quantities. In this study, the whole genome of
sp. SZU445, which ...produces high levels of docosapentaenoic acid (DPA) and docosahexaenoic acid (DHA), was sequenced and subjected to protein annotation. The obtained clean reads (63.55 Mb in total) were assembled into 54 contigs and 25 scaffolds, with maximum and minimum lengths of 400 and 0.0054 Mb, respectively. A total of 3513 genes (24.84%) were identified, which could be classified into six pathways and 44 pathway groups, of which 68 genes (1.93%) were involved in lipid metabolism. In the Gene Ontology database, 22,436 genes were annotated as cellular component (8579 genes, 38.24%), molecular function (5236 genes, 23.34%), and biological process (8621 genes, 38.42%). Four enzymes corresponding to the classic fatty acid synthase (FAS) pathway and three enzymes corresponding to the classic polyketide synthase (PKS) pathway were identified in
sp. SZU445. Although PKS pathway-associated dehydratase and isomerase enzymes were not detected in
sp. SZU445, a putative DHA- and DPA-specific fatty acid pathway was identified.
The main goal of this study is to investigate the effects of the calcium aluminate hydrate (CA04) and the mixture of calcium aluminate and silicate hydrates (CA04 + CS04) on the compressive strengths ...and the microstructure of metakaolin-based geopolymer cements. Bauxite, rice husk and eggshells were calcined and mixed in proper amounts to prepare CA04 and CS04. Metakaolin has been substituted by 0, 5, 10, 15 and 20 wt% of CA04, 10 and 20 wt% of (CA04 + CS04) in the formulation of geopolymer cements. The clay-like solid materials were characterized by measuring their compressive strengths, the crystalline and amorphous phases were monitored using the X-ray diffractometry analysis, their microstructures were investigated using the scanning electron microscope and mercury intrusion porosimetry and the functional groups were studied using the infrared spectroscopy. The compressive strengths of geopolymer cements containing 0, 5, 10, 15 and 20 wt% of CA04 are 49.50, 57.17, 63.59, 38.79 and 35.05 MPa, respectively. Those containing 10 and 20 wt% of (CA04 + CS04) are 40.59 and 51.19 MPa, respectively. The average pore diameters of geopolymer cements containing 0, 10 and 20 wt% of CA04 are 11.80, 10.10, 12.20 nm, respectively. Whereas the one containing 20 wt% of (CA04 + CS04) is 10.80 nm. It appears that geopolymer cement with 10 wt% of CA04 and 20 wt% of (CA04 + CS04) have higher compressive strengths and lower average pore diameters. It was found that 10 and 20 wt% of CA04 and (CA04 + CS04), respectively, could be used as additives for the preparation of geopolymer cements with higher strength development.
•Calcium aluminate hydrate was prepared using calcined bauxite, calcined eggshell and rice husk ash.•Calcium aluminate and silicate hydrates were obtained by mixing CAH and CSH.•Metakaolin was substituted by different amount of CAH and CAH + CSH.•The strengths increase from 49.50 to 63.59 MPa when metakaolin were substituted by 0 and 10 wt% of CAH.•The strengths increase from 40.59 to 51.19 MPa when 10 to 20 wt% of CAH + CSH were used as additives.
Display omitted
•The review synthesises the abundant research areas in airside operation research.•Classification of airside operation research using meta-heuristics is proposed.•This study ...identifies the latest challenge and research in air transport.•Future research directions in modelling and algorithm customisation are identified.•The contemporary research for airside operation in meta-heuristics is addressed.
The number of publications related to airside operation research is increasing and gaining in popularity. This paper aims to provide researchers with a comprehensive and extensive overview of meta-heuristics application for aviation research, with a particular focus on the airside operations. The scope of airside operation research covers airspace and air traffic flow management, aircraft operation in the terminal manoeuvring area and surface traffic operation. Based on the recent publications related to airside operations, the meta-heuristics approach is a promising approach to enhance the computational efficiency and achieve higher applicable in various decisions in airside operations. However, the literature on airside operation research is quite disjointed and disparate. Therefore, a general taxonomy framework for the airside information system is proposed in order to classify the research systematically and expedites related research and development of engineering applications in the aviation industry. To the best of our knowledge, this is the first review of the field using the meta-heuristics approach. The prominent findings of recent publication and the directions of future research are addressed throughout the review and analysis of the relevant studies.
This paper demonstrates how the multilevel pulsewidth modulation (PWM) (MPWM) driving method can be implemented on a full-color large-area light-emitting diode (LED) display panel system through a ...low-cost modification of the existing hardware configuration. The method employs multiple LED driver modules connected in parallel which are combined to deliver MPWM current to individual LED pixels. For a three-level driving scheme, the criterion for selecting the midlevel current in order to maximize the luminous efficacy gain is derived mathematically. The algorithm for video signal conversion required for deriving the subvideo signals from the original high-definition multimedia interface or digital visual interface video signal for activating multiple LED driver modules is also discussed.
•A two-stage decoupled algorithm for conflict-free routing is proposed.•Different types of collisions are detected by time window.•The A* algorithm is improved to generate possible paths at one time.
...Smart mobile robots are deployed to the warehouse environments to improve the efficiency, because of its characteristics of high automation and flexibility characteristics. However, the trajectory planning is a great challenge especially when a number of mobile robotics operates in the warehouse simultaneously. This paper proposes a cyber-physical system model for smart robotic warehouse to implement the workflow data collection and procedure monitor. A decoupled method is presented to find a conflict-free path for the mobile vehicles in the warehouses, after distributing destinations to mobile robots to minimize the total travel distance. The improved A* algorithm is applied to find paths from the source node to the destination node for single mobile vehicle in the domain of smart logistics. Collisions are detected by comparing the occupying time window of each mobile vehicle. Three collision avoidance strategies are developed to solve the conflicts and the candidate path with the minimal completion time is selected as the final determined route. The contribution of the paper is to propose a CPS-enabled robotic warehouse with dynamic conflict-free strategy to self-configure the path to optimize warehouse operation efficiency.
A precision measurement by AMS of the antiproton flux and the antiproton-to-proton flux ratio in primary cosmic rays in the absolute rigidity range from 1 to 450 GV is presented based on 3.49×10^{5} ...antiproton events and 2.42×10^{9} proton events. The fluxes and flux ratios of charged elementary particles in cosmic rays are also presented. In the absolute rigidity range ∼60 to ∼500 GV, the antiproton pover ¯, proton p, and positron e^{+} fluxes are found to have nearly identical rigidity dependence and the electron e^{-} flux exhibits a different rigidity dependence. Below 60 GV, the (pover ¯/p), (pover ¯/e^{+}), and (p/e^{+}) flux ratios each reaches a maximum. From ∼60 to ∼500 GV, the (pover ¯/p), (pover ¯/e^{+}), and (p/e^{+}) flux ratios show no rigidity dependence. These are new observations of the properties of elementary particles in the cosmos.
The physics program at the super-conducting fragment separator (Super-FRS) at FAIR, being operated in a multiple-stage, high-resolution spectrometer mode, is discussed. The Super-FRS will produce, ...separate and transport radioactive beams at high energies up to 1.5 AGeV, and it can be also used as a stand-alone experimental device together with ancillary detectors. Various combinations of the magnetic sections of the Super-FRS can be operated in dispersive, achromatic or dispersion-matched spectrometer ion-optical modes, which allow measurements of momentum distributions of secondary-reaction products with high resolution and precision. A number of unique experiments in atomic, nuclear and hadron physics are suggested with the Super-FRS as a stand-alone device, in particular searches for new isotopes, studies of hypernuclei, delta-resonances in exotic nuclei and spectroscopy of atoms characterized by bound mesons. Rare decay modes like multiple-proton or neutron emission and the nuclear tensor force observed in high-momentum regime can be also addressed. The in-flight radioactivity measurements as well as fusion, transfer and deep-inelastic reaction mechanisms with the slowed-down and energy-bunched fragment beams are proposed for the high-resolution and energy buncher modes at the Super-FRS.
To investigate and report on the clinical and epidemiological characteristics of the first case of human infection with avian influenza A(H7N9) virus in Hangzhou, China. A field epidemiological ...survey was used to study the first case in Hangzhou. The patient was a 39-year-old male chef with a history of exposure to a farm product market and to poultry prior to the onset of disease on 15 March 2013. He had diarrhea, chills, pyrexia, and intermittent cough with freshly red foamy bloody sputum early in his disease. His fever > 39 °C continued for a week with rapid progression. Computed tomography findings showed extensive bilateral consolidation, followed by multiorgan failure. The patient died on the morning of 27 March. His infection was eventually confirmed 1 week later on 3 April. Flu-like symptoms including fever and cough were found in 46 of his 138 close contacts. This was the first case of human infection with avian influenza A(H7N9) virus in Hangzhou. None of the close contacts had onset of the disease. The case patient’s condition progressed rapidly. The source of infection might be his exposure to the farm product market, but the mode of exposure remains unclear.