ABSTRACT We present a new model for the distribution of free electrons in the Galaxy, the Magellanic Clouds, and the intergalactic medium (IGM) that can be used to estimate distances to real or ...simulated pulsars and fast radio bursts (FRBs) based on their dispersion measure (DM). The Galactic model has an extended thick disk representing the so-called warm interstellar medium, a thin disk representing the Galactic molecular ring, spiral arms based on a recent fit to Galactic H ii regions, a Galactic Center disk, and seven local features including the Gum Nebula, Galactic Loop I, and the Local Bubble. An offset of the Sun from the Galactic plane and a warp of the outer Galactic disk are included in the model. Parameters of the Galactic model are determined by fitting to 189 pulsars with independently determined distances and DMs. Simple models are used for the Magellanic Clouds and the IGM. Galactic model distances are within the uncertainty range for 86 of the 189 independently determined distances and within 20% of the nearest limit for a further 38 pulsars. We estimate that 95% of predicted Galactic pulsar distances will have a relative error of less than a factor of 0.9. The predictions of YMW16 are compared to those of the TC93 and NE2001 models showing that YMW16 performs significantly better on all measures. Timescales for pulse broadening due to interstellar scattering are estimated for (real or simulated) Galactic and Magellanic Cloud pulsars and FRBs.
Condensation on superhydrophobic nanostructured surfaces offers new opportunities for enhanced energy conversion, efficient water harvesting, and high performance thermal management. These surfaces ...are designed to be Cassie stable and favor the formation of suspended droplets on top of the nanostructures as compared to partially wetting droplets which locally wet the base of the nanostructures. These suspended droplets promise minimal contact line pinning and promote passive droplet shedding at sizes smaller than the characteristic capillary length. However, the gas films underneath such droplets may significantly hinder the overall heat and mass transfer performance. We investigated droplet growth dynamics on superhydrophobic nanostructured surfaces to elucidate the importance of droplet morphology on heat and mass transfer. By taking advantage of well-controlled functionalized silicon nanopillars, we observed the growth and shedding behavior of suspended and partially wetting droplets on the same surface during condensation. Environmental scanning electron microscopy was used to demonstrate that initial droplet growth rates of partially wetting droplets were 6× larger than that of suspended droplets. We subsequently developed a droplet growth model to explain the experimental results and showed that partially wetting droplets had 4–6× higher heat transfer rates than that of suspended droplets. On the basis of these findings, the overall performance enhancement created by surface nanostructuring was examined in comparison to a flat hydrophobic surface. We showed these nanostructured surfaces had 56% heat flux enhancement for partially wetting droplet morphologies and 71% heat flux degradation for suspended morphologies in comparison to flat hydrophobic surfaces. This study provides insights into the previously unidentified role of droplet wetting morphology on growth rate, as well as the need to design Cassie stable nanostructured surfaces with tailored droplet morphologies to achieve enhanced heat and mass transfer during dropwise condensation.
CsV3 Sb5 is a newly discovered Z2 topological kagome metal showing the coexistence of a charge-density-wave (CDW)-like order at T* = 94 K and superconductivity (SC) at Tc = 2.5 K at ambient pressure. ...Here, we study the interplay between CDW and SC in CsV3 Sb5 via measurements of resistivity, dc and ac magnetic susceptibility under various pressures up to 6.6 GPa. We find that the CDW transition decreases with pressure and experience a subtle modification at Pc1 ≈ 0.6 – 0.9 GPa before it vanishes completely at Pc2 ≈ 2 GPa . Correspondingly, Tc(P) displays an unusual M -shaped double dome with two maxima around Pc1 and Pc2 , respectively, leading to a tripled enhancement of Tc to about 8 K at 2 GPa. The obtained temperature-pressure phase diagram resembles those of unconventional superconductors, illustrating an intimated competition between CDW-like order and SC. The competition is found to be particularly strong for the intermediate pressure range Pc1 ≤ P ≤ Pc2 as evidenced by the broad superconducting transition and reduced superconducting volume fraction. The modification of CDW order around Pc1 has been discussed based on the band structure calculations. This work not only demonstrates the potential to raise Tc of the V-based kagome superconductors, but also offers more insights into the rich physics related to the electron correlations in this novel family of topological kagome metals.
Substrate orientation could play a key role in the stray grain (SG) formation in laser welded single crystal (SX) alloys, which is critical to a successful repair of SX components. In a previous work ...Acta mater 2015; 88:283–292, we studied theoretically the substrate orientation effect on equiaxed SG susceptibility in laser melt pools by altering the orientation via rotations around x-, y-, and z-axis, which coincide with the 100, 010, and 001 crystallographic directions, respectively. It was found that y-axis rotation leads to a strong variation in SG ability whereas x- and z-axis rotations nearly have no effect. In this study, experiments were conducted to verify the calculated results. DD6, a second-generation Chinese SX superalloy was chosen as the object of research. The orientation-dependent SG formation was determined and the area-average volume fraction of SGs was employed to evaluate the overall CET tendency. The experimental tendency of the orientation dependent SG agrees well with the theoretical prediction. The effect of the substrate orientation on SG formation was further revealed by cosψ distribution, where ψ is a geometrical parameter which is the angle between normal vector to the solidification front and preferred crystallographic direction in dendrite domain. Our results provide an in-depth insight into the control of laser processing window for SX repair via adjusting the substrate orientation.
Display omitted