This paper introduces a novel compact ultralightweight multiband RF energy harvester fabricated on a paper substrate. The proposed rectenna is designed to operate in all recently released LTE bands ...(range 0.79-0.96 GHz; 1.71-2.17 GHz; and 2.5-2.69 GHz). High compactness and ease of integration between antenna and rectifier are achieved by using a topology of nested annular slots. The proposed rectifier features an RF-to-dc conversion efficiency in the range of 5%-16% for an available input power of -20 dBm in all bands of interest, which increases up to 11%-30% at -15 dBm. The rectenna has been finally tested both in laboratory and in realistic scenarios featuring a superior performance to other state-of-the-art RF harvesters on flexible substrates.
Radio-Frequency IDentification (RFID) devices and sensors are among the main innovations of the last years, with an enormous impact on the Internet of Things (IoT) physical communication layer as ...well as on logistics and robotics. The aim of the present paper is to review the main technologies available for RFID sensors, and to identify the corresponding state-of-the-art when these technologies are applied to realistic IoT scenarios. Firstly, the concepts of radio backscattering and harmonic backscattering are analyzed, highlighting the pros and cons of each approach. Then, state-of-the-art solutions are reported, and the performance of each of them are discussed, to provide an overview of the potential of RFID-based sensing in different scenarios.
This paper presents a novel passive Schottky-diode frequency doubler equipped with an on-off keying (OOK) modulation port to be used in harmonic transponders for both identification and sensing ...applications. The amplitude modulation of the second-harmonic output signal is achieved by driving a low-frequency MOSFET, which modifies the dc impedance termination of the doubler. Since the modulation signal is applied to the gate port of the transistor, no static current is drained. A proof-of-concept prototype was manufactured and tested, operating at 1.04 GHz. An on/off ratio of 23 dB was observed in the conversion loss of the doubler for an available input power of -10 dBm. The modulation port of the circuit was excited with a square wave (fm up to 15 MHz), and the measured sidebands in the spectrum featured a good agreement with the theory. Then, the doubler was connected to a harmonic antenna system and tested in a wireless experiment for fm up to 1 MHz, showing an excellent performance. Finally, an experiment was conducted where the output signal of the doubler was modulated by a reed switch used to measure the rotational speed of an electrical motor. This work opens the door to a new class of frequency doublers, suitable for ultra low-power harmonic transponders for identification and sensing applications.
This study illustrates the sensing and wound healing properties of silk fibroin in combination with peptide patterns, with an emphasis on the printability of multilayered grids, and envisions ...possible applications of these next-generation silk-based materials. Functionalized silk fibers covalently linked to an arginine-glycine-aspartic acid (RGD) peptide create a platform for preparing a biomaterial ink for 3D printing of grid-like piezoresistors with wound-healing and sensing properties. The culture medium obtained from 3D-printed silk fibroin enriched with RGD peptide improves cell adhesion, accelerating skin repair. Specifically, RGD peptide-modified silk fibroin demonstrated biocompatibility, enhanced cell adhesion, and higher wound closure rates at lower concentration than the neat peptide. It was also shown that the printing of peptide-modified silk fibroin produces a piezoresistive transducer that is the active component of a sensor based on a Schottky diode harmonic transponder encoding information about pressure. We discovered that such biomaterial ink printed in a multilayered grid can be used as a humidity sensor. Furthermore, humidity activates a transition between low and high conductivity states in this medium that is retained unless a negative voltage is applied, paving the way for utilization in non-volatile organic memory devices. Globally, these results pave the way for promising applications, such as monitoring parameters such as human wound care and being integrated in bio-implantable processors.
In this paper, we present a 6.78 MHz Pulsed Wireless Power Transfer (PWPT) system specifically designed for powering the electronics placed on a suction roll of a paper mill machinery, thus enabling ...rotating equipment monitoring. The system utilizes a pair of different resonant coils to maintain a stable coupling coefficient for a fraction of the roll rotation period while guaranteeing compactness and ease of installation. Designed using both Commercial-off-the-Shelf (COTS) and custom components, the developed WPT system achieves a DC-DC efficiency of 62% in the specific working conditions. The transferred power is used to supply an Internet-of-Things (IoT) node that continuously measures and transmits data about the operation status. A fully operational system for battery and angular position monitoring has been developed and tested in a laboratory environment. This research presents a comprehensive analysis of the system and explores the interaction of different coils to maintain a stable coupling coefficient in dynamic applications. The same approach can be employed for rotating machinery with similar geometrical constraints or more general dynamic applications characterized by periodic movements and limited space for the coupling system.
This invited paper presents potential solutions for tackling some of the main underlying challenges toward developing sustainable Internet-of-things (IoT) devices with a focus on eco-friendly ...manufacturing, sustainable powering, and wireless connectivity for next-generation IoT devices. The diverse applications of IoT systems, such as smart cities, wearable devices, self-driving cars, and industrial automation, are driving up the number of IoT systems at an unprecedented rate. In recent years, the rapidly-increasing number of IoT devices and the diverse application-specific system requirements have resulted in a paradigm shift in manufacturing processes, powering methods, and wireless connectivity solutions. The traditional cloud-centering IoT systems are moving toward distributed intelligence schemes that impose strict requirements on IoT devices, e.g., operating range, latency, and reliability. In this article, we provide an overview of hardware-related research trends and application use cases of emerging IoT systems and highlight the enabling technologies of next-generation IoT. We review eco-friendly manufacturing for next-generation IoT devices, present alternative biodegradable and eco-friendly options to replace existing materials, and discuss sustainable powering IoT devices by exploiting energy harvesting and wireless power transfer. Finally, we present (ultra-)low-power wireless connectivity solutions that meet the stringent energy efficiency and data rate requirements of future IoT systems that are compatible with a batteryless operation.
In this paper, the prototypical deployment of a Multiple-Input-Multiple-Output (MIMO) antennas system, denoted as Smart Selective Antennas System (SSAS), aiming at mitigating inter-cell interference ...effects of cellular networks for in-flight Unmanned Aerial Vehicles (UAVs), is discussed. In detail, the proposed SSAS is beneficial to increase the communication reliability over existing cellular networks, especially with regard to complex Beyond Visual Line of Sight (BVLOS) drones' missions and applications. Its deployment is motivated as existing 4G Long Term Evolution (LTE) cellular networks (as well as 5G networks) are mainly designed and optimized for terrestrial utilization, thus not taking into account interference effects on flying connected devices. The prototypical implementation of the SSAS has been expedient to conduct multiple experimental flights with a drone at different altitudes, collecting performance results and validating the proposed SSAS as a viable solution for inter-cell interference mitigation.
This paper presents a holistic and authoritative review of the role of microwave technologies in enabling a new generation of wearable devices. A human-centric Internet of Things (IoT) covering ...remote healthcare, distributed sensing, and consumer electronics, calls for high-performance wearable devices integrated into clothing, which require interdisciplinary research efforts to emerge. Microwaves, the "interconnect" of wireless networks, can enable, rather than solely connect, the next generation of autonomous, sustainable, and wearable-friendly electronics. First, enabling technologies including wireless power transmission and RF energy harvesting, backscattering and passive communication, RFID, and electromagnetic sensing are reviewed. We then discuss the key integration platforms, covering smart fabrics and electronic textiles, additive manufacturing, printed electronics, natively-flexible and organic RF semiconductors, and fully-integrated CMOS systems, where opportunities for hybrid integration are highlighted. The emerging research trends, from mmWave 6G, RF sensing and imaging, to healthcare applications including neural implants, drug delivery, and safety upon exposure to microwaves are re-visited and discussed, presenting a future roadmap for interdisciplinary research towards sustainable and reliable next-generation wearables.
Radio frequency (RF) energy harvesting and wireless power transmission (WPT) technologies -both near-field and far-field-have attracted significant interest for wireless applications and RFID ...systems. We already utilize near-field WPT products in our life and it is expected that RF EH and far-field WPT systems can drive the future low-power wireless systems. In this article, we initially present a brief historical overview of these technologies. The main technical challenges of rectennas and WPT transmitters are discussed. Furthermore, this paper presents the recent advances on the development of these technologies, including the possibility of powering RFID systems through the millimeter wave power from 5G networks, the trends in flexible rectennas design and the technological developments on the simultaneous wireless information and power transfer (SWIPT).
This paper presents a miniaturized Doppler radar that can be used as a motion sensor for low-cost Internet of things (IoT) applications. For the first time, a radar front-end and its antenna are ...integrated on a multilayer cellulose-based substrate, built-up by alternating paper, glue and metal layers. The circuit exploits a distributed microstrip structure that is realized using a copper adhesive laminate, so as to obtain a low-loss conductor. The radar operates at 24 GHz and transmits 5 mW of power. The antenna has a gain of 7.4 dBi and features a half power beam-width of 48 degrees. The sensor, that is just the size of a stamp, is able to detect the movement of a walking person up to 10 m in distance, while a minimum speed of 50 mm/s up to 3 m is clearly measured. Beyond this specific result, the present paper demonstrates that the attractive features of cellulose, including ultra-low cost and eco-friendliness (i.e., recyclability and biodegradability), can even be exploited for the realization of future high-frequency hardware. This opens opens the door to the implementation on cellulose of devices and systems which make up the "sensing layer" at the base of the IoT ecosystem.