This article describes a design of an field-programmable gate array (FPGA) implementation of a clock and data recovery (CDR) system. The core will be integrated in the FPGA configuration for the ...front-end electronics (FEE) board of the Jiangmen underground neutrino observatory (JUNO) experiment. The front-end will be placed on the main detector, underground and underwater, making the electronics not accessible after installation. The timing and trigger system relies on a synchronous link connection over CAT5e cable (up to 100 m long) between the front-end and the back-end electronics (BEE), where a twisted-pair is dedicated to clock-forwarding. The robustness of the recovery clock system is essential for the stability of the FPGA firmware. The proposed project is intended to improve the clock recovery operation by increasing the immunity of the link to sudden electromagnetic interference (EMI). On top of this, the core allows to free a twisted-pair in the link, since the clock can be recovered from the data and there is no more need for a clock-dedicated transmission. This will optimize the link granting the possibility to implement other features. The design is based on two components: a numerically-controlled oscillator (NCO), in order to create a controlled frequency clock signal, and a digital phase detector (PD) to match the clock frequency with the data rate. NCOs are often coupled with a digital-to-analog converter (DAC) to create direct digital synthesizers (DDSs), which are able to produce analog waveforms of any desired frequency. In the presented case instead, the NCO generates a digital clock signal of an arbitrary frequency, while the PD manages this frequency by intercepting any shifting on the relative phase between the clock and the data. A phase aligner (PA) module guarantees that data are sampled in the middle of the eye pattern, which represents the optimal sampling point. The article presents an overview of the NCO-based CDR design and implementation, together with some tests and results in order to verify the CDR reliability. Moreover, in the last section, some other possible applications of the core are illustrated.
We report on the search for dark matter weakly interacting massive particles (WIMPs) in the mass range below 10 GeV=c2 from the analysis of the entire dataset acquired with a low-radioactivity argon ...target by the DarkSide-50 experiment at Laboratori Nazionali del Gran Sasso. The new analysis benefits from more accurate calibration of the detector response, improved background model, and better determination of systematic uncertainties, allowing us to accurately model the background rate and spectra down to 0.06 keVer. A 90% C.L. exclusion limit for the spin-independent cross section of 3 GeV=c2 mass WIMP on nucleons is set at 6 × 10-43 cm2, about a factor 10 better than the previous DarkSide-50 limit. This analysis extends the exclusion region for spin-independent dark matter interactions below the current experimental constraints in the 1.2, 3.6 GeV=c2 WIMP mass range.
Jiangmen Underground Neutrino Observatory (JUNO) is a next generation liquid scintillator neutrino experiment under construction phase in South China. Thanks to the anti-neutrinos produced by the ...nearby nuclear power plants, JUNO will be able to study the neutrino mass hierarchy, one of the open key questions in neutrino physics. One key ingredient for a successful measurement is to use high speed, high resolution sampling electronics located very close to the detector signal. Linearity in the response of the electronics is another important ingredient for the success of the experiment. During the initial design phase of the electronics, a custom design with the Front-End and Read-Out electronics located very close to the detector analog signal has been developed and successfully tested. The present paper describes the electronics structure and the first tests performed on the prototypes. The electronics prototypes have been tested and they show good linearity response, with a maximum deviation of 1.3% over the full dynamic range (1-1000 p.e.), fulfilling the JUNO experiment requirements.
Starting from the equation of motion of the quantum operator of a real scalar field φ in de Sitter space–time, a simple differential equation is derived which describes the evolution of quantum ...fluctuations 〈φ2〉 of this field. Full de Sitter invariance is assumed and no ad hoc infrared cutoff is introduced. This equation is solved explicitly and in massive case our result agrees with the standard one. In massless case the large time behavior of our solution differs by sign from the expression found in earlier papers. A possible cause of discrepancy may be a spontaneous breaking of de Sitter invariance.
This paper describes the design, construction principles and operations of the distillation and stripping pilot plants tested at the Daya Bay Neutrino Laboratory, with the perspective to adapt these ...processes, system cleanliness and leak-tightness standards to the final full scale plants to be used for the purification of the liquid scintillator of the JUNO neutrino detector. The main goal of these plants is to remove radio impurities from the liquid scintillator while increasing its optical attenuation length. Purification of liquid scintillator will be performed with a system combining alumina oxide, distillation, water extraction and steam (or N2 gas) stripping. Such a combined system will aim at obtaining a total attenuation length greater than 20 m @430 nm, and a bulk radiopurity for 238U and 232Th in the 10−15÷ 10−17 g/g range. The pilot plants commissioning and operation have also provided valuable information on the degree of reliability of their main components, which will be particularly useful for the design of the final full scale purification equipment for the JUNO liquid scintillator. This paper describes two of the five pilot plants since the Alumina Column, fluorescent material mixing and the Water Extraction plants are being developed by the Chinese part of the collaboration.
Finding unequivocal evidence of dark matter interactions in a particle detector is a major goal of research in physics. Liquid argon time projection chambers offer a path to probe Weakly Interacting ...Massive Particles scattering cross sections on nuclei down to the so-called neutrino floor, in a mass range from a few GeV to hundreds of TeV. Based on the successful operation of the DarkSide-50 detector at LNGS, a new and more sensitive experiment, DarkSide-20k, has been designed and is now under construction. A thorough understanding of the DarkSide-50 detector response and, therefore, of all types of events observed in the detector, is essential for the optimal design of the new experiment. In this article, we report on a specific set of events, namely, standard two-pulse scintillation–ionization signals with a third small amplitude pulse, occurring within the 440μs data acquisition window of standard events. Some of these events are due to the photoionization of the TPC cathode. We compare our results with those published by collaborations using liquid xenon time projection chambers, which observed a similar phenomenon, and, in particular, with a recent paper by the LUX Collaboration (D.S. Akerib et al. Phys.Rev.D 102, 092004 (2020)) From the measured rate of these events, we estimate for the first time the quantum efficiency of the tetraphenyl butadiene deposited on the DarkSide-50 cathode at wavelengths of around 128 nm, in liquid argon. Also, both experiments observe events likely related to the photoionization of impurities in the liquid. The probability of photoelectron emission per unit length turns out to be an order of magnitude lower in DarkSide-50 than in LUX.
We reanalize data collected with the DarkSide-50 experiment and recently used to set limits on the spin-independent interaction rate of weakly interacting massive particles (WIMPs) on argon nuclei ...with an effective field theory framework. The dataset corresponds to a total (16660 $\pm$ 270) kg d exposure using a target of low-radioactivity argon extracted from underground sources. We obtain upper limits on the effective couplings of the 12 leading operators in the nonrelativistic systematic expansion. For each effective coupling we set constraints on WIMP-nucleon cross sections, setting upper limits between $2.4 \times 10^{-45} \, \mathrm{cm}^2$ and $2.3 \times 10^{-42} \, \mathrm{cm}^2$ (8.9 $\times 10^{-45} \, \mathrm{cm}^2$ and 6.0 $\times 10^{-42} \, \mathrm{cm}^2$) for WIMPs of mass of 100 $\mathrm{GeV/c^2}$ (1000 $\mathrm{GeV/c^2}$) at 90\% confidence level.
As part of the DarkSide program of direct dark matter searches using two-phase argon TPCs, a prototype detector with an active volume containing 10kg of liquid argon, DarkSide-10, was built and ...operated underground in the Gran Sasso National Laboratory in Italy. A critically important parameter for such devices is the scintillation light yield, as photon statistics limits the rejection of electron-recoil backgrounds by pulse shape discrimination. We have measured the light yield of DarkSide-10 using the readily-identifiable full-absorption peaks from gamma ray sources combined with single-photoelectron calibrations using low-occupancy laser pulses. For gamma lines of energies in the range 122–1275keV, we get light yields averaging 8.887±0.003(stat)±0.444(sys) p.e./keVee. With additional purification, the light yield measured at 511keV increased to 9.142±0.006(stat) p.e./keVee.
PDF
