Opportunities for enhancing solar energy harvesting using photon upconversion are reviewed. The increasing prominence of bifacial solar cells is an enabling factor for the implementation of ...upconversion, however, when the realistic constraints of current best-performing silicon devices are considered, many challenges remain before silicon photovoltaics operating under nonconcentrated sunlight can be enhanced via lanthanide-based upconversion. A photophysical model reveals that >1-2 orders of magnitude increase in the intermediate state lifetime, energy transfer rate, or generation rate would be needed before such solar upconversion could start to become efficient. Methods to increase the generation rate such as the use of cosensitizers to expand the absorption range and the use of plasmonics or photonic structures are reviewed. The opportunities and challenges for these approaches (or combinations thereof) to achieve efficient solar upconversion are discussed. The opportunity for enhancing the performance of technologies such as luminescent solar concentrators by combining upconversion together with micro-optics is also reviewed. Triplet-triplet annihilation-based upconversion is progressing steadily toward being relevant to lower-bandgap solar cells. Looking toward photocatalysis, photophysical modeling indicates that current blue-to-ultraviolet lanthanide upconversion systems are very inefficient. However, hope remains in this direction for organic upconversion enhancing the performance of visible-light-active photocatalysts.
Abstract
The major goal of this review is to summarize recent exciting findings that have been published within the past 10 years that, to our knowledge, have not been presented in detail in previous ...reviews and that may impact altered follicular development in polycystic ovarian syndrome (PCOS) and premature ovarian failure in women. Specifically, we will cover the following: (1) mouse models that have led to discovery of the derivation of two precursor populations of theca cells in the embryonic gonad; (2) the key roles of the oocyte-derived factor growth differentiation factor 9 on the hedgehog (HH) signaling pathway and theca cell functions; and (3) the impact of the HH pathway on both the specification of theca endocrine cells and theca fibroblast and smooth muscle cells in developing follicles. We will also discuss the following: (1) other signaling pathways that impact the differentiation of theca cells, not only luteinizing hormone but also insulinlike 3, bone morphogenic proteins, the circadian clock genes, androgens, and estrogens; and (2) theca-associated vascular, immune, and fibroblast cells, as well as the cytokines and matrix factors that play key roles in follicle growth. Lastly, we will integrate what is known about theca cells from mouse models, human-derived theca cell lines from patients who have PCOS and patients who do not have PCOS, and microarray analyses of human and bovine theca to understand what pathways and factors contribute to follicle growth as well as to the abnormal function of theca.
Theca cells are derived from two embryonic gonadal sources and differentiate into steroidogenic cells or fibroblast/perivascular cells, respectively, in response to oocyte and granulosa cell factors.
A down-converting (DC) layer placed on the front side of a silicon solar cell has the potential to generate more than one low-energy photon for every incident high-energy photon. Recent theory has ...predicted that DC in conjunction with a silicon solar cell can achieve a conversion efficiency of up to 38.6%. This paper examines the application of rare-earth-doped inorganic materials for achieving external quantum efficiencies greater than unity and enhancing the conversion efficiency of silicon solar cells. Such DC mechanisms have been applied in similar phosphor materials used by the lighting and display industries. The opportunities for the DC of high-energy solar photons to multiple photons with energy greater than the silicon bandgap are discussed.
The classical view of ovarian follicle development is that it is regulated by the hypothalamic-pituitary-ovarian axis, in which gonadotropin-releasing hormone (GnRH) controls the release of the ...gonadotropic hormones follicle-stimulating hormone (FSH) and luteinizing hormone (LH), and that ovarian steroids exert both negative and positive regulatory effects on GnRH secretion. More recent studies in mice and humans indicate that many other intra-ovarian signaling cascades affect follicular development and gonadotropin action in a stage- and context-specific manner. As we discuss here, mutant mouse models and clinical evidence indicate that some of the most powerful intra-ovarian regulators of follicular development include the TGF-beta/SMAD, WNT/FZD/beta-catenin, and RAS/ERK1/2 signaling pathways and the FOXO/FOXL2 transcription factors.
The transport of hydrated ions through narrow pores is important for a number of processes such as the desalination and filtration of water and the conductance of ions through biological channels. ...Here, molecular dynamics simulations are used to systematically examine the transport of anionic drinking water contaminants (fluoride, chloride, nitrate, and nitrite) through pores ranging in effective radius from 2.8 to 6.5 Å to elucidate the role of hydration in excluding these species during nanofiltration. Bulk hydration properties (hydrated size and coordination number) are determined for comparison with the situations inside the pores. Free energy profiles for ion transport through the pores show energy barriers depend on pore size, ion type, and membrane surface charge and that the selectivity sequence can change depending on the pore size. Ion coordination numbers along the trajectory showed that partial dehydration of the transported ion is the main contribution to the energy barriers. Ion transport is greatly hindered when the effective pore radius is smaller than the hydrated radius, as the ion has to lose some associated water molecules to enter the pore. Small energy barriers are still observed when pore sizes are larger than the hydrated radius due to re‐orientation of the hydration shell or the loss of more distant water. These results demonstrate the importance of ion dehydration in transport through narrow pores, which increases the current level of mechanistic understanding of membrane‐based desalination and transport in biological channels.
The critical role of ion hydration for determining anion selectivity in narrow pores is examined as a function of anion type, pore size, and surface charge. Ion transport is strongly hindered in narrow pores, due to the energetic expense of the required ion dehydration.
This paper discusses ways of reducing the two major losses encountered in a single-junction photovoltaic (PV) device—that of sub-band gap transmission and lattice thermalisation losses—via the ...application of passive luminescent devices called up- and down-converters, respectively. Down-conversion (DC) results in the generation of more than one lower energy photon being generated per incident high-energy photon, while up-conversion (UC) generates one photon with energy for every two or more sub-band gap photons absorbed. A related process of wavelength down-shifting (DS) is similar to DC except that the external quantum efficiency of the DS process is less than unity.
The use of emerging nanotechnologies, such as plasmonic nanoparticles in diagnostic applications, potentially offers opportunities to revolutionize disease management and patient healthcare. Despite ...worldwide research efforts in this area, there is still a dearth of nanodiagnostics which have been successfully translated for real-world patient usage due to the predominant sole focus on assay analytical performance and lack of detailed investigations into clinical performance in human samples. In a bid to address this pressing need, we herein describe a comprehensive clinical verification of a prospective label-free surface-enhanced Raman scattering (SERS) nanodiagnostic assay for prostate cancer (PCa) risk stratification. This contribution depicts a roadmap of (1) designing a SERS assay for robust and accurate detection of clinically validated PCa RNA targets; (2) employing a relevant and proven PCa clinical biomarker model to test our nanodiagnostic assay; and (3) investigating the clinical performance on independent training (n = 80) and validation (n = 40) cohorts of PCa human patient samples. By relating the detection outcomes to gold-standard patient biopsy findings, we established a PCa risk scoring system which exhibited a clinical sensitivity and specificity of 0.87 and 0.90, respectively area-under-curve of 0.84 (95% confidence interval: 0.81–0.87) for differentiating high- and low-risk PCa in the validation cohort. We envision that our SERS nanodiagnostic design and clinical verification approach may aid in the individualized prediction of PCa presence and risk stratification and may overall serve as an archetypical strategy to encourage comprehensive clinical evaluation of nanodiagnostic innovations.
Hybrid organic–inorganic metal halide perovskite semiconductors provide opportunities and challenges for the fabrication of low‐cost thin‐film photovoltaic devices. The opportunities are clear: the ...power conversion efficiency (PCE) of small‐area perovskite photovoltaics has surpassed many established thin‐film technologies. However, the large‐scale solution‐based deposition of perovskite layers introduces challenges. To form perovskite layers, precursor solutions are coated or printed and these must then be crystallized into the perovskite structure. The nucleation and crystal growth must be controlled during film formation and subsequent treatments in order to obtain high‐quality, pin‐hole‐free films over large areas. A great deal of understanding regarding material engineering during the perovskite film formation process has been gained through spin‐coating studies. Based on this, significant progress has been made on transferring material engineering strategies to processes capable of scale‐up, such as blade coating, spray coating, inkjet printing, screen printing, relief printing, and gravure printing. Here, an overview is provided of the strategies that led to devices deposited by these scalable techniques with PCEs as high as 21%. Finally, the opportunities to fully close the shrinking gap to record spin‐coated solar cells and to scale these efficiencies to large areas are highlighted.
Impressive progress has been made in the last few years on producing perovskite photovoltaics using scalable printing and coating technologies. The key developments, such as the control of nucleation and crystal growth of the perovskite thin film, which have enabled this rapid progress in coated and printed perovskite photovoltaics, are highlighted.
In this work, the authors realize stable and highly efficient wide‐bandgap perovskite solar cells that promise high power conversion efficiencies (PCE) and are likely to play a key role in next ...generation multi‐junction photovoltaics (PV). This work reports on wide‐bandgap (≈1.72 eV) perovskite solar cells exhibiting stable PCEs of up to 19.4% and a remarkably high open‐circuit voltage (VOC) of 1.31 V. The VOC‐to‐bandgap ratio is the highest reported for wide‐bandgap organic−inorganic hybrid perovskite solar cells and the VOC also exceeds 90% of the theoretical maximum, defined by the Shockley–Queisser limit. This advance is based on creating a hybrid 2D/3D perovskite heterostructure. By spin coating n‐butylammonium bromide on the double‐cation perovskite absorber layer, a thin 2D Ruddlesden–Popper perovskite layer of intermediate phases is formed, which mitigates nonradiative recombination in the perovskite absorber layer. As a result, VOC is enhanced by 80 mV.
By coating n‐butylammonium bromide on wide‐bandgap double‐cation perovskite absorber layers (EG ≈ 1.72 eV), a thin 2D Ruddlesden–Popper perovskite layer of intermediate phase is formed. The resulting heterostructure mitigates nonradiative recombination and enables a high open‐circuit voltage of up to 1.31 V and stable power output efficiencies of up to 19.4%.