Fluorescence resonance energy transfer (FRET) enables photosynthetic light harvesting, wavelength downconversion in light-emitting diodes (LEDs), and optical biosensing schemes. The rate and ...efficiency of this donor to acceptor transfer of excitation between chromophores dictates the utility of FRET and can unlock new device operation motifs including quantum-funnel solar cells, non-contact chromophore pumping from a proximal LED, and markedly reduced gain thresholds. However, the fastest reported FRET time constants involving spherical quantum dots (0.12-1 ns; refs 7-9) do not outpace biexciton Auger recombination (0.01-0.1 ns; ref. 10), which impedes multiexciton-driven applications including electrically pumped lasers and carrier-multiplication-enhanced photovoltaics. Few-monolayer-thick semiconductor nanoplatelets (NPLs) with tens-of-nanometre lateral dimensions exhibit intense optical transitions and hundreds-of-picosecond Auger recombination, but heretofore lack FRET characterizations. We examine binary CdSe NPL solids and show that interplate FRET (∼6-23 ps, presumably for co-facial arrangements) can occur 15-50 times faster than Auger recombination and demonstrate multiexcitonic FRET, making such materials ideal candidates for advanced technologies.
Hydride-terminated silicon (Si) nanocrystals were capped with dodecanethiol by a thermally promoted thiolation reaction. Under an inert atmosphere, the thiol-capped nanocrystals exhibit ...photoluminescence (PL) properties similar to those of alkene-capped Si nanocrystals, including size-tunable emission wavelength, relatively high quantum yields (>10%), and long radiative lifetimes (26–280 μs). X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) spectroscopy confirmed that the ligands attach to the nanocrystal surface via covalent Si–S bonds. The thiol-capping layer, however, readily undergoes hydrolysis and severe degradation in the presence of moisture. Dodecanethiol could be exchanged with dodecene by hydrosilylation for enhanced stability.
Although a fundamental understanding of the pathogenicity of most biothreat agents has been elucidated and available treatments have increased substantially over the past decades, they still ...represent a significant public health threat in this age of (bio)terrorism, indiscriminate warfare, pollution, climate change, unchecked population growth, and globalization. The key step to almost all prevention, protection, prophylaxis, post-exposure treatment, and mitigation of any bioagent is early detection. Here, we review available methods for detecting bioagents including pathogenic bacteria and viruses along with their toxins. An introduction placing this subject in the historical context of previous naturally occurring outbreaks and efforts to weaponize selected agents is first provided along with definitions and relevant considerations. An overview of the detection technologies that find use in this endeavor along with how they provide data or transduce signal within a sensing configuration follows. Current “gold” standards for biothreat detection/diagnostics along with a listing of relevant FDA approved in vitro diagnostic devices is then discussed to provide an overview of the current state of the art. Given the 2014 outbreak of Ebola virus in Western Africa and the recent 2016 spread of Zika virus in the Americas, discussion of what constitutes a public health emergency and how new in vitro diagnostic devices are authorized for emergency use in the U.S. are also included. The majority of the Review is then subdivided around the sensing of bacterial, viral, and toxin biothreats with each including an overview of the major agents in that class, a detailed cross-section of different sensing methods in development based on assay format or analytical technique, and some discussion of related microfluidic lab-on-a-chip/point-of-care devices. Finally, an outlook is given on how this field will develop from the perspective of the biosensing technology itself and the new emerging threats they may face.
Ge nanocrystals have a large Bohr radius and a small, size-tunable band gap that may engender direct character via strain or doping. Colloidal Ge nanocrystals are particularly interesting in the ...development of near-infrared materials for applications in bioimaging, telecommunications and energy conversion. Epitaxial growth of a passivating shell is a common strategy employed in the synthesis of highly luminescent II–VI, III–V and IV–VI semiconductor quantum dots. Here, we use relatively unexplored IV/II–VI epitaxy as a way to enhance the photoluminescence and improve the optical stability of colloidal Ge nanocrystals. Selected on the basis of their relatively small lattice mismatch compared with crystalline Ge, we explore the growth of epitaxial CdS and ZnS shells using the successive ion layer adsorption and reaction method. Powder X-ray diffraction and electron microscopy techniques, including energy dispersive X-ray spectroscopy and selected area electron diffraction, clearly show the controllable growth of as many as 20 epitaxial monolayers of CdS atop Ge cores. In contrast, Ge etching and/or replacement by ZnS result in relatively small Ge/ZnS nanocrystals. The presence of an epitaxial II–VI shell greatly enhances the near-infrared photoluminescence and improves the photoluminescence stability of Ge. Ge/II–VI nanocrystals are reproducibly 1–3 orders of magnitude brighter than the brightest Ge cores. Ge/4.9CdS core/shells show the highest photoluminescence quantum yield and longest radiative recombination lifetime. Thiol ligand exchange easily results in near-infrared active, water-soluble Ge/II–VI nanocrystals. We expect this synthetic IV/II–VI epitaxial approach will lead to further studies into the optoelectronic behavior and practical applications of Si and Ge-based nanomaterials.
The danger posed by biological threat agents and the limitations of modern detection methods to rapidly identify them underpins the need for continued development of novel sensors. The application of ...nanomaterials to this problem in recent years has proven especially advantageous. By capitalizing on large surface/volume ratios, dispersability, beneficial physical and chemical properties, and unique nanoscale interactions, nanomaterial-based biosensors are being developed with sensitivity and accuracy that are starting to surpass traditional biothreat detection methods, yet do so with reduced sample volume, preparation time, and assay cost. In this review, we start with an overview of bioagents and then highlight the breadth of nanoscale sensors that have recently emerged for their detection.
The coupling of ordered electronic phases with lattice, spin, and orbital degrees of freedom are of central interest in strongly correlated systems. Their interplay has been intensively studied from ...femtosecond to picosecond time scales, while their dynamics beyond nanoseconds are usually assumed to follow lattice cooling. Here, we report an unusual slowing down of the recovery of an electronic phase across a first-order phase transition. Following optical excitation, the recovery time of both transient optical reflectivity and X-ray diffraction intensity from the charge-ordered superstructure in a La1/3Sr2/3FeO3 thin film increases by orders of magnitude as the sample temperature approaches the phase transition temperature. In this regime, the recovery time becomes much longer than the lattice cooling time. The combined experimental and theoretical investigation shows that the slowing down of electronic recovery corresponds to the pseudo-critical dynamics that originates from magnetic interactions close to a weakly first-order phase transition.
Two uranyl squarates, (UO2)6(C4O4)3(OH)6O2·9H2O·4NH4 (1; a = 16.6897(7) Å, cubic, I23) and (UO2)(C4O4)(OH)2·2NH4 (2; a = 8.5151(4), b = 15.6822(8), c = 7.3974, orthorhombic, Pbcm), have been ...synthesized from ambient aqueous solutions as a function of pH. Oligomerization of the uranyl cation from monomeric pentagonal bipyramids (pH < 5) to (UO2)3O(OH)3 trimers (5 < pH < 8) in 1 and ultimately (UO2)(OH)2 n chains (7 < pH < 8) in 2 is observed. This evolution of speciation versus pH is consistent with what has been observed in solution and thus may be represented by the uranyl hydrolysis equilibrium, mUO2 2+ + nH2O ↔ (UO2) m (OH) n 2m − n + nH+. Structural systematics, physical properties, and a discussion of species selectivity by squarate anions are presented.
We examine the stability of excitons in quantum-confined InP nanocrystals as a function of temperature elevation up to 800 K. Through the use of static and time-resolved spectroscopy, we find that ...small inorganic capping ligands substantially improve the temperature dependent photoluminescence quantum yield relative to native organic ligands and perform similarly to a wide band gap inorganic shell. For this composition, we identify the primary exciton loss mechanism as electron trapping through a combination of transient absorption and transient photoluminescence measurements. Density functional theory indicates little impact of studied inorganic ligands on InP core states, suggesting that reduced thermal degradation relative to organic ligands yields improved stability; this is further supported by a lack of size dependence in photoluminescence quenching, pointing to the dominance of surface processes, and by relative thermal stabilities of the surface passivating media. Thus, small inorganic ligands, which benefit device applications due to improved carrier access, also improve the electronic integrity of the material during elevated temperature operation and subsequent to high temperature material processing.
We report the synthesis of two uranyl squarates and two mixed-ligand uranyl squarate−oxalates from aqueous solutions under hydrothermal conditions. These products exhibit a range of uranyl building ...units from squarates with monomers in (UO2)2(C4O4)5·6NH4·4H2O (1; a = 16.731(17) Å, b = 7.280(8) Å, c = 15.872(16) Å, β = 113.294(16)°, monoclinic, P21/c) and chains in (UO2)2(OH)2(H2O)2(C4O4) (2; a = 12.909(5) Å, b = 8.400(3) Å, c = 10.322(4) Å, β = 100.056(7)°, monoclinic, C2/c) to two squarate−oxalate polymorphs with dimers in (UO2)2(OH)(C4O4)(C2O4)·NH4·H2O (3; a = 9.0601(7) Å, b = 15.7299(12) Å, c = 10.5108(8) Å, β = 106.394(1)°, monoclinic, P21/n; and 4; a = 8.4469(6) Å, b = 7.7589(5) Å, c = 10.5257(7) Å, β = 105.696(1)°, monoclinic, P21/m). The dominance at low pH of monomeric species and the increasing occurrence of oligomeric species with increasing pH suggests that uranyl hydrolysis, mUO2 2+ + nH2O ⇌ (UO2) m (OH) n 2m−n + nH+, has a significant role in the identity of the inorganic building unit. Additional factors that influence product assembly include in situ hydrolysis of squaric acid to oxalic acid, dynamic metal to ligand concentration, and additional binding modes resulting from the introduction of oxalate anions. These points and the effects of uranyl hydrolysis with changing pH are discussed in the context of the compounds presented herein.
Heterometallic carboxyphosphonates UO2 2+/Ln3+ have been prepared from the hydrothermal reaction of uranyl nitrate, lanthanide nitrate (Ln = Sm, Tb, Er, Yb), and phosphonoacetic acid (H3PPA). ...Compound 1, (UO2)2(PPA)(HPPA)2Sm(H2O)·2H2O (1) adopts a two-dimensional structure in which the UO2 2+ metal ions bind exclusively to the phosphonate moiety, whereas the Ln3+ ions are coordinated by both phosphonate and carboxylate functionalities. Luminescence studies of 1 show very bright visible and near-IR samarium(III)-centered emission upon direct excitation of the uranyl moiety. The Sm3+ emissive state exhibits a double-exponential decay with lifetimes of 67.2 ± 6.5 and 9.0 ± 1.3 μs as measured at 594 nm, after excitation at both 365 and 420 nm. No emission is observed in the region typical of the uranyl cation, indicating that all energy is either transferred to the Sm3+ center or lost to nonradiative processes. Herein we report the synthesis, crystal structure, and luminescent behavior of 1, as well as those of the isostructural terbium, erbium, and ytterbium analogues.