Development of new types of antibacterial coatings or nanocomposites is of great importance due to widespread multidrug-resistant infections including bacterial infections. Herein, we investigated ...biocompatibility as well as structural, photocatalytic, and antibacterial properties of photoactive hydrophobic carbon quantum dots/polyurethane nanocomposite. The swell-encapsulation-shrink method was applied for production of these nanocomposites. Hydrophobic carbon quantum dots/polyurethane nanocomposites were found to be highly effective generator of singlet oxygen upon irradiation by low-power blue light. Analysis of conducted antibacterial tests on Staphyloccocus aureus and Escherichia coli showed 5-log bactericidal effect of these nanocomposites within 60 min of irradiation. Very powerful degradation of dye (rose bengal) was observed within 180 min of blue light irradiation of the nanocomposites. Biocompatibility studies revealed that nanocomposites were not cytotoxic against mouse embryonic fibroblast cell line, whereas they showed moderate cytotoxicity toward adenocarcinomic human epithelial cell line. Minor hemolytic effect of these nanocomposites toward red blood cells was revealed.
This publication summarises the current state of knowledge and technology on the possibilities and limitations of using mineral and synthetic fillers in the field of 3D printing of thermoplastics. ...FDM technology can be perceived as a miniaturised variation of conventional extrusion processing (a microextrusion process). However, scaling the process down has an undoubtful drawback of significantly reducing the extrudate diameter (often by a factor of ≈20–30). Therefore, the results produced under conventional extrusion processing cannot be simply translated to processes run with the application of FDM technology. With that in mind, discussing the latest findings in composite materials preparation and application in FDM 3D printing was necessary.
Due to controversial reports concerning antibacterial activity of different graphene based materials it is very important to investigate their antibacterial action on a wide range of Gram-positive ...and Gram-negative bacteria. In this paper we have investigated the structure induced phototoxic antibacterial activity of four types of graphene based materials: graphene oxide (GO), graphene quantum dots (GQDs), carbon quantum dots (CQDs) and nitrogen doped carbon quantum dots (N-CQDs). Antibacterial activity was tested on 19 types of bacteria. It is found that nanometer-size CQDs and N-CQDs are the most potent agents whereas micrometer-size GO has very poor antibacterial activity. Electron paramagnetic resonance measurements confirmed photodynamic production of singlet oxygen for all types of used quantum dots. Detailed analysis has shown that N-CQDs are an excellent photodynamic antibacterial agent for treatment of bacterial infections induced by
(
),
(
),
(
),
(
),
(
) and
.
Display omitted
•New type of photoactive antibacterial surface.•Simple route to fabricate hCQDs/PDMS nanocomposites.•hCQDs/PDMS nanocomposites eradicate bacteria under blue light efficiently.
Despite ...great efforts, the design of antibacterial surfaces is still a challenge. In this work, results of structural, mechanical, cytotoxic and antibacterial activities of hydrophobic carbon quantum dots/polydimethylsiloxane surfaces are presented. Antibacterial action of this surface is based on the generation of reactive oxygen species which cause bacteria damage by oxidative stress. At the same time, this surface was not cytotoxic towards the NIH/3T3 cells. Swelling-encapsulation-shrink method is applied for encapsulation of hydrophobic carbon quantum dots in medical grade silicone-polydimethylsiloxane. XPS and photoluminescence spectroscopy analyses confirm that hydrophobic carbon quantum dots have been encapsulated successfully into polydimethylsiloxane polymer matrix. Based on stress-strain test the improvement of mechanical properties of these nanocomposites is established. It is shown by electron paramagnetic resonance spectroscopy and luminescence method that nanocomposite generates singlet oxygen initiated by 470 nm blue light irradiation. Antibacterial testing shows the nanocomposite in the form of foil kills Staphylococcus aureus, Escherichia coli and Klebsiella pneumoniae and is very effective after only a 15 min irradiation.
Photoactive materials called photosensitizers can be used for treatment of different types of cancer in combination with light source. In this paper, we have investigated pro-oxidant and antioxidant ...potentials of four graphene based nanomaterials (graphene oxide-GO, graphene quantum dots-GQDs, carbon quantum dots-CQDs and N-doped carbon quantum dots-N-CQDs) depending on the presence/absence of visible light source. Structural and optical properties of these materials and their potentials for reactive oxygen species generation/quenching are investigated by applying different microscopy and spectroscopy techniques (transmission electron microscopy, FTIR, UV–Vis, photoluminescence, electron paramagnetic resonance). Results show that all types of quantum dots has pro-oxidant and antioxidant potentials whereas GO demonstrated only moderate antioxidant effect. The best free radical scavenger is CQDs sample in the absence of light. CQDs are the best singlet oxygen generator under blue light irradiation as well. To check photo-cytotoxicity of these materials, photo-cytotoxic concentrations of the GO, GQDs, CQDs and N-CQDs were determined for three cellular lines: human rhabdomyosarcoma (RD), cell line derived from human cervix carcinoma Hep2c (HeLa) and fibroblast cell line from murine (L2OB). Cytotoxicity test has indicated that all samples are much less photocytotoxic than cis-diamminedichloroplatinum (cis-DPP). The production method and doping of quantum dots affect the photodynamic activity of tested samples very much.
Display omitted
•Graphene oxide size and structure materials.•Crossover between pro-oxidant and antioxidant activities.•Fullerene like structure affects ROS generation/quenching.•Blue light dependent cytotoxicity toward cancer cells.
Due to their unique structural properties bacterial cellulose (BC) hydrogels find possible usage in many fields such as cosmetology, food industry, or medicine. In this study, photoactive BC ...hydrogels are investigated through modifications of their structural, mechanical, and pro‐oxidant properties resulting from graphene quantum dots (GQDs) encapsulation. Detailed structural analysis is conducted by atomic force microscopy, transmission electron microscopy and scanning electron microscopy, X‐ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and X‐ray diffraction method. Dynamic mechanical analysis is performed to study the changes in storage modulus, loss modulus and tan δ. Pro‐oxidative properties of new designed composites are tested by electron paramagnetic resonance (EPR). Structural and mechanical analyses show successful encapsulation of GQDs into BC whereas EPR measurements indicate high potential of these composites for singlet oxygen production.
Photoactive GQDs‐BC composite hydrogels are produced by immersing BC in GQDs acetone solution. Detailed structural, chemical and mechanical analyses show that photoactive GQDs are encapsulated into BC polymer matrix. Porosity test shows significant pore enlargement of GQDs‐BC composite hydrogels. Composite hydrogels are highly potent oxygen radical generator and present advanced material for wound dressing application.
Development of new types of antimicrobial coatings is of utmost importance due to increasing problems with pathogen transmission from various infectious surfaces to human beings. In this study, new ...types of highly potent antimicrobial polyurethane composite films encapsulated by hydrophobic riboflavin-based carbon polymer dots are presented. Detailed structural, optical, antimicrobial, and cytotoxic investigations of these composites were conducted. Low-power blue light triggered the composites to eradicate
in 30 min, whereas the same effect toward
was reached after 60 min. These composites also show low toxicity against MRC-5 cells. In this way, RF-CPD composites can be used for sterilization of highly touched objects in the healthcare industry.
In recent years, water pollution and contamination had become a major threat to the ecosystem. However, the use of nanostructured materials has been proven as a very promising approach in the ...treatment of polluted water. The present study reports the results of the gamma ray-assisted modification of hydrophobic carbon quantum dot (hCQD)/polyurethane nanocomposites for photocatalytic degradation of organic dyes. Different characterization methods were applied to investigate the influence of the different doses of gamma irradiation (1, 10 and 200 kGy) on the physical and chemical properties of nanocomposites (morphology, chemical content, mechanical properties, wettability, and potential for singlet oxygen generation). Surface morphology and mechanical properties analyses showed that gamma rays induced insignificant changes in the structure of nanocomposites, but the potential for singlet oxygen generation increased significantly. Here we also explore, in detail, the photocatalytic properties of gamma-ray modified hCQDs/polyurethane nanocomposites. UV-vis analysis showed that the removal efficiency of the rose bengal dye reached up to 97% for the nanocomposite irradiated with the dose of 200 kGy.
The addition of heteroatoms to pristine carbon quantum dots (CQDs) change their structure and optical properties. In this study, fluorine (F)- and chlorine (Cl)-doped CQDs are prepared by the ...one-step green hydrothermal route from sodium fluoride, sodium chloride, urea, and citric acid as the starting precursors. Microscopy analysis reveals that the average size of these quantum dots is 5 ± 2 nm, whereas the chemical study shows the existence of C–F and C–Cl bonds. The produced F- and Cl-doped CQDs have fluorescence quantum yields of 0.151 and 0.284, respectively, at an excitation wavelength of 450 nm. Charge transfer resistance of F- and Cl-doped CQDs films is 2 orders of magnitude higher than in the pristine CQD films. Transport band gap of the doped CQDs is 2 eV bigger than that of pristine CQDs. Radical scavenging activity shows very good antioxidant activity of doped CQDs. Antibacterial testing reveals poor antibacterial activity against Staphylococcus aureus and Escherichia coli. The F- and Cl-doped CQDs are successfully used as fluorescent probes for cell imaging as shown by confocal microscopy.